TECLAST T98 Bricked help

[hocuspocus69]

i've just received my teclast t98 c6r3 32GB
after flashing rileyrom 1.1 (special one for c6r3)
i cannot power on it neither reflash because my PC windows 7 64bit see it and install vcom driver
but spflash tool doesn't start to dowload firmware no more
what can i do?
thanx

[Edius]

With SP Flash Tool prepared (with all boxes checked and Download Only mode selected ...Download button pressed) keep Power+Volume down (or volume up) for 5-10 seconds and connect to PC USB. You should see some activity to SP Flash Tool bottom and Succes message.

[hocuspocus69]

On tablet enter menu boot mode but on sp flashtool no activities and in boot mode no vcom driver present...

[Edius]

I don't understand what you say, but tablet must be powered off before any flash attempt.

[hocuspocus69]

When i press power + volume up tablet power on and enter in a boot menu where is recovery fastboot normal and uart to select and on the side computer no activities in spflash...

[Edius]

You are doing something wrong.
Follow this tutorial step by step, was made for Cube T9 (I have T9) and you'll be good.
http://freaktab.com/forum/mtk-based-...644#post415644
L.E
Please ignore all link's for ROM, TWRP,etc since is useless for your tablet and use specific ones for you.

[hocuspocus69]

Solved!!!! bootloop without logo i thinked it was poweroff but it wasn't battery totally discharge then perfect flashing
thanx