Cube Talk 9x can't boot

[ZigZor9]

1- The Cube Logo appeared as normal, blinked once and then stayed there.
2- If i try to go to Recovery Mode in the Bootmenu (Powerbutton plus Vol Up, plus Vol Down to enter), i get the same boot hang as described in 1
3 - If i connect it to my Power Adapter i get a Battery Icon which is empty, even if i let it connected the whole night.
4 - I also tried to flash stock Rom with SP Flash Tool (last version), but I have a BROM error : S_FT_download fail (i use kits we can find here). SP flash can read the devicebut can't do anything on it (format option doesn't work too)
5- I have tried all the drivers available here.
6- I have tried to flash with anoter PC

I have tried to empty the battery and refill it

I have seen all videos ...

Any idea ?

[ZigZor9]

I have ran a memory test from SP Flash wich said :
ERROR : NAND Flash was not detected!
S_FT_MEMORY_TEST_FAIL (4048)

============ Memory Detection Report ===========

Internal RAM:

Size = 0x00020000 (128KB)

External RAM:

Type = DRAM

Size = 0x40000000 (1024MB/8192Mb)

NAND Flash:

ERROR: NAND Flash was not detected!

EMMC:

EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x0000000386000000(14432MB)



... start thinking it's dead ... :-(

[ponzeta]

Hi ZigZor,
I have the same tablet with the same symntons.
No action change the result.
Have you solved the problem?
How do you have ran the memory test from SP Flash?
Thank you
Lorenzo

[ZigZor9]

Yes SP flash can run memory tests
i choose this to try something, the result is disappointing ... the NAND memory don't respond anymore ...

[Mariuzas]

Same problem. Can someone help to fix this?

[cmwb]

Hi, Same problem here, also get BROM ERROR : S_FT_DOWNLOAD_FAIL (4008) when trying to flash.
I do also have a working cube, which reports
NAND Flash:

ERROR: NAND Flash was not detected!

So I GUESS THIS IS NORMAL

EMMC TEST dedicated pattern test is the one that fails

[adesinaabolaji]

Mine is a Lil different only that my cube talk 9x only boots into recovery. This happened after i tried installing the on air update I got then it stopped midway and since then it has been booting into recovery