Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Mk809 II boot loop with 1.8 finless

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Mk809 II boot loop with 1.8 finless

    hi, my mk809 ii is on loop after flash with 1.8, is on image logo loop, whit RKBatchTool i don't see anything.

    OMG...

    I tried to plug/unplug etc etc restart a lot of times but don't quit to the boot loop.

    can you help me?

    #2
    Re: Mk809 II boot loop with 1.8 finless

    You must erase idb before flashing

    Verstuurd van mijn GT-S5660 met Tapatalk
    if you love my work please buy a coffee

    <form action="https://www.paypal.com/cgi-bin/webscr" method="post">https://www.paypalobjects.com/en_GB/i/scr/pixel.gif
    https://www.paypalobjects.com/en_US/..._donate_SM.gif


    </form>

    Comment


      #3
      Re: Mk809 II boot loop with 1.8 finless

      You must short pin the chip and rkbatchtool see your device again

      Verstuurd van mijn GT-S5660 met Tapatalk
      if you love my work please buy a coffee

      <form action="https://www.paypal.com/cgi-bin/webscr" method="post">https://www.paypalobjects.com/en_GB/i/scr/pixel.gif
      https://www.paypalobjects.com/en_US/..._donate_SM.gif


      </form>

      Comment


        #4
        Any picture available maybe to help him which pins to short?
        - UG007-II with Finless iMito MX1/2 1.7a ROM and UG802 2Dark4U 1080p overclock kernel and USB WIFI dongle.
        - MK808 with Finless MK808 1.7c ROM and 2Dark4U 1.4 MK808 1080p overclock kernel.
        - MK908-II: XBMC full 1080p playback with a 1080p kernel HERE

        Comment


          #5
          Originally posted by Abducted View Post
          Any picture available maybe to help him which pins to short?
          ok if you open your device

          see you something like this.
          open rkbatchtool.
          short pin the 2 iron dots (hold it)
          while holding the dots plugin the usb to the computer and you see that rkbatchtool connect your device.

          Click image for larger version

Name:	Kv0Gv7Vg.jpg
Views:	1
Size:	157.2 KB
ID:	430066

          if you have 2 micro usb than connect the cable to de micro usb for connecting the stick for file transfer and not into the power micro usb.
          if you love my work please buy a coffee

          <form action="https://www.paypal.com/cgi-bin/webscr" method="post">https://www.paypalobjects.com/en_GB/i/scr/pixel.gif
          https://www.paypalobjects.com/en_US/..._donate_SM.gif


          </form>

          Comment


            #6
            thank you my friend. the problem is solved.

            I'm very anxious because it's my gift fot the birthday and my girlfriend could kill me..


            :=)

            Comment


              #7
              Originally posted by dk-wamp View Post
              thank you my friend. the problem is solved.

              I'm very anxious because it's my gift fot the birthday and my girlfriend could kill me..


              :=)
              was that the solution now?
              short pin?
              if you love my work please buy a coffee

              <form action="https://www.paypal.com/cgi-bin/webscr" method="post">https://www.paypalobjects.com/en_GB/i/scr/pixel.gif
              https://www.paypalobjects.com/en_US/..._donate_SM.gif


              </form>

              Comment


                #8
                yes, with a little knife, after bachtools in restore.

                and now.. I retry to use 1.7 finless, today I changed this version because wifi didn't work..

                Comment


                  #9
                  Originally posted by dk-wamp View Post
                  yes, with a little knife, after bachtools in restore.

                  and now.. I retry to use 1.7 finless, today I changed this version because wifi didn't work..
                  ok im happy you fixed it
                  if you love my work please buy a coffee

                  <form action="https://www.paypal.com/cgi-bin/webscr" method="post">https://www.paypalobjects.com/en_GB/i/scr/pixel.gif
                  https://www.paypalobjects.com/en_US/..._donate_SM.gif


                  </form>

                  Comment


                    #10
                    thank you for you help :=)

                    but I'm frustrated,
                    1.8 in boot loop
                    1.7 and 1.6 wifi doesn't work
                    1.5 slow..

                    I restore to original

                    Comment


                      #11
                      Which 1.7 ROM did you use? I mean there is a 1.7 ROM for pretty much every stick out there.

                      Also did you happen to check what it says on the WIFI chip while you had it opened? (Or maybe you can open it up again?)
                      - UG007-II with Finless iMito MX1/2 1.7a ROM and UG802 2Dark4U 1080p overclock kernel and USB WIFI dongle.
                      - MK808 with Finless MK808 1.7c ROM and 2Dark4U 1.4 MK808 1080p overclock kernel.
                      - MK908-II: XBMC full 1080p playback with a 1080p kernel HERE

                      Comment


                        #12
                        I used RBox UG802 JB 2dark_finless1.7 Root Debloat init.d
                        wifi don't start with this mod.

                        To install this mod I use alternate_reboot_to_flash_tool because with ROM Flash Tool.exe only, doesn't reboot.

                        I tried to start wifi from 1.7 (1.6) rom but doesn't work.

                        Comment


                          #13
                          Oke, well in that case... The MK809-II uses the same hardware as the UG007, the UG007-II and the iMito MX1 and MX2.

                          I have an UG007-II myself and i'm using the 1.7a ROM for the iMito MX1/2.

                          That should use the same WIFI chip as your MK809-II (Mediatek chip). It sometimes takes a couple of full reboots (completely power off the device) for the WIFI to work.

                          I hope that one works for you.


                          p.s. Soon there will be a new custom ROM + (overclock) kernel available for the UG007(II) and the MX1/2, so if that MX1/2 ROM works for you, that upcomming ROM/Kernel will probably also work on your MK809-II.
                          - UG007-II with Finless iMito MX1/2 1.7a ROM and UG802 2Dark4U 1080p overclock kernel and USB WIFI dongle.
                          - MK808 with Finless MK808 1.7c ROM and 2Dark4U 1.4 MK808 1080p overclock kernel.
                          - MK908-II: XBMC full 1080p playback with a 1080p kernel HERE

                          Comment


                            #14
                            ok, I'm traying to install ROM -> Imito MX1&2 Finless 1.7a ROM (250 megs) ..

                            good luck dk-wamp !

                            Comment


                              #15
                              A lot of crash anche wifi signal very low. 1/2 max.

                              I don't know if the wifi is cause of these crashs.

                              i tried to reboot 6-7 times but wifi doesn't works fine.
                              Do you know if could I fix wifi problem?

                              Comment

                              Working...
                              X