[ROM] "Finally v0.1" based on MK80_SDK3.0_150627 (thanks to Boxx!!!)

[linuxeux]

Hi guys, my understanding is that firmware is not rooted. So, can I root this firmware on a Tronsmart Draco like other device ? I need to mount nfs shared and I can't find how to do it with you using a rooted firmware. Regards.

[SwitNJ]

Hi, guys! I have a problem on my Draco Telos with his remote control. In the "cursor mode" all works fine, but when I switch to "mouse mode" - up, down, left and right keys works like an cursor, but not mouse moving, and central button work as "mouse down". How can I fix it?? It's very big trouble for my wife - please, help me! )

[hi-phile]

In regards to playback in Kodi - just a suggestion, try switching decoding options in playback acceleration options. Libstagefright enabled, mediacodec disabled
decoding method, hardware accelerated

[gokuh82]

So far Kodi Isengard doesn't let me play 60 fps network files smoothly. Helix does better and MX Player almost perfect. Kodi Helix does'n't show any frame skips counted but it still does'n't play as smooth as i would like it too, i still notice some micro stutter. I can play 60 fps files thru my Samsung Blu-ray player over ethernet very smoothly and it looks like its a disc playing, but not so with the Draco. I don't like using the blu-ray player as a media box due to its limitations. Is this a kernel or hardware issue that were waiting from Allwinner to fix? I'm connected via ethernet cable to my router which has a external hard drive connected to it.

[gokuh82]

Thanks frhdt007. I was a little impatient i guess.

[frhdt007]

Hello. Can anyone let me know how to flash rom this with out the sd card method? All I get with the Phoenix sd card method is after the green bar loads all the way I get the sd card ok message at the top then the box shuts off and never comes back on(waited 20 min). I don't know if it makes a difference how it's flashed bit I tried to flash the image with my computer and it goes thru and shows the first image with the rom version on the bottom right then it gets forever stuck with a Google logo with spinning gears and never restarts or loads (waited 30 mins 2ice ). Any ideas?

It's normal that the box shuts off and never comes back after being flashed by SD card method. You have to 1) take out the SD card and 2) unplug and replug the power cord.

[gokuh82]

Hello. Can anyone let me know how to flash rom this with out the sd card method? All I get with the Phoenix sd card method is after the green bar loads all the way I get the sd card ok message at the top then the box shuts off and never comes back on(waited 20 min). I don't know if it makes a difference how it's flashed bit I tried to flash the image with my computer and it goes thru and shows the first image with the rom version on the bottom right then it gets forever stuck with a Google logo with spinning gears and never restarts or loads (waited 30 mins 2ice ). Any ideas?

[singlespeed]

Going to try this on my CS-Q8 A80 .....anyone see why not to try it ??.

Thanks in advance !

[gctronic]

I have put in ROM boxx in rikomagic mk80....................is good

[scooter2014]

Has anyone tested on ricomaic mk80???

[OlivDur]

if you use the remote to turn it "off", it will go to sleep mode and you can wake it up with the same remote.
If you turn it "off" by clicking "Power off", of course, the remote CAN NOT power on the device.

Thanks for the trick, works like a charm !

[frhdt007]

Hi,

I received my draco a few days ago and I directly switched to this rom and so far it's awesome. Big thanks to Boxx and GJayJayG!

Just one question: When the device is off I noticed the remote is unable to switch it on and have to unplug/plug to start it. Anybody has a workaround?

Thanks!

if you use the remote to turn it "off", it will go to sleep mode and you can wake it up with the same remote.
If you turn it "off" by clicking "Power off", of course, the remote CAN NOT power on the device.

[OlivDur]

Hi,

I received my draco a few days ago and I directly switched to this rom and so far it's awesome. Big thanks to Boxx and GJayJayG!

Just one question: When the device is off I noticed the remote is unable to switch it on and have to unplug/plug to start it. Anybody has a workaround?

Thanks!

[frhdt007]

I flashed this ROM and updated KODI via PlayMarket. Updated Kodi sound settings to use direct output, turned on AC3 and DTS passthrough, turned on passthrough sound in the Android sound settings.
I have 5.1 output but the sound is seriously distorted.
Am I missing some settings or shouldn't I have updated Kodi?

Don't update Kodi.

Sent from my K013 using Tapatalk

[shprota]

I flashed this ROM and updated KODI via PlayMarket. Updated Kodi sound settings to use direct output, turned on AC3 and DTS passthrough, turned on passthrough sound in the Android sound settings.
I have 5.1 output but the sound is seriously distorted.
Am I missing some settings or shouldn't I have updated Kodi?