cs918 flashing

[nolet2]

I have fixed 1 of the cs918's by holding down reset and powering up. The other one just the red light comes on 5 or 6 seconds when you push the power button..the rk batch tool does not detect the media players is there a different program I can use to load the img files also is a usb a to usb a cable into the otr cable the correct cables to do this job ?

Thanx in advance
Nolet2

[nolet2]

Can someone confirm if my cables are correct...if not post the right ones

Thanx

[Karloz06]

Hi,,Nolet2 i just tried this and its the otg port on device to usb on pc also you have to have the unit device with the power connected

[GeniusTv]

On my cs918 when I tried to flash my rom with the RK batch tool I needed to hit the "switch" button like the one found here

http://www.hotmcu.com/wiki/images/1/16/Android_tools_1.jpg

Once I pressed that my device was recognized and I was able to download the .img files.

I also had to press that "switch" button to re-flash the device.

Hopefully that helps,
John

[nolet2]

So Genius I have 2 run both programs at once ..batch tool and marsboard v 21 and hit the switch button so the batch tool will detect the cs918 ?

[GeniusTv]

Sorry for the delay but Yes that what I had to do