MXQ OTT S805 Box Bricked- Red LED constantly ON

[Piecia1980]

thanks a lot, check it out today.

[hjpca]

Welcome everyone, I'm new here. my mbox does not turn on. By shorting pin 17 & 18 computer detects MXQ. on the motherboard I have such signs HD180_V1.2 2015/05/09 and S805-V1.2 20150520.
Please help which firmware I write it using a USB burning tool? I would love to go back to the factory firmware. in another forum someone had the same motherboard and gave a link to this rom "mxq_1207_aml_upgrade_package. img" file is 949MB. whether it is better to write it MXQ112k4. the latter worked with me or to load with the SD.

Or maybe something completely different, help rescue my box.

Goto post #55 it will work for your mxq board...3 posts up from here

[Piecia1980]

Welcome everyone, I'm new here. my mbox does not turn on. By shorting pin 17 & 18 computer detects MXQ. on the motherboard I have such signs HD180_V1.2 2015/05/09 and S805-V1.2 20150520.
Please help which firmware I write it using a USB burning tool? I would love to go back to the factory firmware. in another forum someone had the same motherboard and gave a link to this rom "mxq_1207_aml_upgrade_package. img" file is 949MB. whether it is better to write it MXQ112k4. the latter worked with me or to load with the SD.

Or maybe something completely different, help rescue my box.

[Hercules Man]

Hi Hercules,

it's not worked. I used https://cloud.mail.ru/public/7oSn/WunL7sMWW - worked fine T.hanks.

gcsuri

Glad to hear you have had a result, I'm wondering how Shadi86 got on as he hasn't said anything.



H MAn

[gcsuri]

Hi Hercules,

it's not worked. I used https://cloud.mail.ru/public/7oSn/WunL7sMWW - worked fine. Thanks.

gcsuri

[Hercules Man]

Which .img I have to upload? I have S805_MXQ_V3 also.

regards, gcsuri

For v03, i used this

https://mega.nz/#!n8tS1IjJ!T6PQBOnXPbsmwpMkq2zqAKwS4qQS_-UYq2tmE0CNqz8

Let us know if it worked for you!!


H MAn

[gcsuri]

you will need to use usb burning tool and flash with the correct .iso. I have a V03 board.

H MAn

Which .img I have to upload? I have S805_MXQ_V3 also.

regards, gcsuri

[Hercules Man]

Ok, I found the recovery button in SPDIF
SDcard method haven't worked
Do I need to short the pins and push the button together???

If you cannot boot recovery from SD Card you will need to use usb burning tool and flash with the correct .iso. I have a V03 board. If you open your box you will see some print on the mainboard which will give you the version number. You will need to use a male to male usb cable. I made one up myself from 2 old usb cables and it worked a treat. No need to connect the power supply, just connect the 2 correct pins together with a small philips screwdriver, plug the cable into the otg port at back of box, as soon and you hear your pc connect to the box. remove screwdriver from your 2 pins. i think the 2 pins could be different depending which board you have, mine is a v03 and the pins i have to connect are pin 17 and 18 or ALE to WE. Hope you get it sorted, let me know if you need any more help


H MAn

[gcsuri]

Ok, I found the recovery button in SPDIF
SDcard method haven't worked
Do I need to short the pins and push the button together???

[gcsuri]

Hi Hercules,

I have S805_MXQ_V03 board. What pins I have to short? In some post "push recovery button" - I think my board doesn't have any recovery button

best regards, gcsuri

[Hercules Man]

I have v2, but I give it one more try and see with a other img, I appreciate your help mate

Skickat från min D6603 via Tapatalk

These are the others i would try

https://mega.nz/#!dkhXnKqJ!oILur-l9tv7J4BvXCBfbSHIwmRqHGRCpY4gqxVv0hHY

http://www.mediafire.com/download/59ygnplj32s9uh2

If they dont work either then sorry, i dont know what to suggest




H MAn

[Shadi86]

I have v2, but I give it one more try and see with a other img, I appreciate your help mate

Skickat från min D6603 via Tapatalk

[Hercules Man]

I took force and normal erase in setting, but are you sure you get the same fail message?

Try here for more help

http://mbox.co.za/forum/viewtopic.ph...t=182&start=10

My board is V03 anyway but maybe your board is v02, maybe you need different image i dont know.

[Shadi86]

Did you try Erase All in settings

I took force and normal erase in setting, but are you sure you get the same fail message?

[Hercules Man]

Did you try Erase All in settings, infact it should be force erase all, let me know

You can also try to flash the *.img firmware file without USB Burning tool:
1) Rename your *.img firmware file to aml_upgrade_package.img
2) Download the *.ini file: aml_sdc_burn.ini
3) Write this two files to your SD card
4) Put the SD card to your device, press the recovery button and put the power cable.

This also can work with "29-30 pins" trick.