MXIII 2gb S802 Bricked

[pepelu22]

Hi,

Please help. Today I flashed this device with Finless 2.1 Rom. It showed some errors about partitions, I used Method 2. After that, it booted into recovery. Then it no longer boots. Led is blue. When I try to press reset button + power it does nothing, Led goes blue but nothing shows in the screen. Coul it be that the reset button does not works? It is there any way to revive this device?

Please help

[mitchell4you]

Hi,
Make sure the sdcard holds recovery.IMG
Then..when you hold reset..connect powercord..power the unit, it should boot from sdcard/recovery.img

[pepelu22]

Thanks. I unbricked it. The problem was the reset button in the AV was not working, so the box was unable to enter in recovery mode. You may notice this because the led goes blue after powering on even with the reset button in the AV pushed.

I fixed it jumping the pins 8-9 of the NAND Flash, as explained here http://freaktab.com/forum/tv-player-...TV01-CS968-V3=

I plugged the power to the MXIII, I plugged the laptop to the box using the OTG cable. I jumped pins 8-9 as explained in the picture of the posted thread, and then I pressed the power button. I realized that something different was going on this time because the led of the box didn't go blue, it remained red, and after 2-3 secs my computer recognized the Amlogic device, then you can release the jumper if you wish.

Then I flashed a MXIII image using the USB Burning Tool.

Thanks to this thread! It saved me 50 € and a very angry customer!!!