Pics* MXIII S812 2GB, suitable FW lollipop/prerooted? n200, ap6330

[munnybunnyman]

Hi, My MXIII S802 2gb recently stopped working after a year and it was pre-rooted. I loved it so I decided to buy another one, same spec. But the one that came in the post is different! It’s a S812/2GB MXIII (boot screen logo of processor then MBOX) and unrooted. The power button if different as you have to hold it for a few seconds and the remote was slightly different too. I wanted to know if I can update to lollipop with rooted firmware! Please note I’m a complete novice. So any instructions or directions would be most appreciated My pictures:

[knipser99]

Hi,

where do you find the Hardware Info?
i dont find it in my settings...

[munnybunnyman]

Hi,

where do you find the Hardware Info?
i dont find it in my settings...

I downloaded and app from Play store call 'Hardware Info'

[knipser99]

I downloaded and app from Play store call 'Hardware Info'

THX!!!

[munnybunnyman]

Any Help?!?!

[Haba]

You need a high quality picture of the manufacturers ID to identify the board. Check the thread below post 6, it might help.http://freaktab.com/forum/tv-player-...e-106l1_151029

[Lurker]

That circuit board looks very different from the Beelink MXIII-G. The MXIII M82 has an S802 processor. Where did you purchase the unit from?

Here are some pics of the Beelink MXIII-G circuit board to compare (scroll down) ...
http://forum.xda-developers.com/andr...eview-t3160863

http://www.gearbest.com/tv-box-mini-pc/pp_230335.html

Maybe there is something useful (or at least warnings on what not to do!) in this SkyKirin M8S thread. I think it might be risky to try to upgrade the current firmware.

http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/529553-i-unbrick-m8s-how-to-included-now-i-need-firmware-rom-m8s-model-kca-003

[030theo]

I think I got the same box (from E-Bay). On the PCB it is labelled: "Model: KCA-005 Ver: 1.0 DATE: 150625" and it looks the same like the PCB on your Pictures...
My Remote has the "factory_code = 0xfd020001" which seems to be very unique for these Boxes.
Updating this Box is very dangerous I think. I installed Openelec from SD and afterwards it was bricked.
It seems it has got a special U-Boot. I tried about 10 different U-Boot images and none of them worked like the original and at last it seems that the
Wifi/Bluetooth GPIO pins are not "standard" => both are not working with any image I tried!
If you manage to make a backup of your Firmware, I would like to get a copy...
I haven't made one before updating - a big mistake! :-(

Sorry for my bad english.

[030theo]

I solved my Problem!
If anyone should need the original Firmware for this Box, he could find it here:

http://pan.baidu.com/share/home?uk=674527696#category/type=0

The preinstalled firmware of my box is: aml_upgrade_package_s812c_mx3_20150805.7z
There is also a new version: aml_upgrade_package_s812c_mx3_20151027.7z

For Flashing you need at least version 2.0.5.9 of the AML Burning Tool:
USB_Burning_Tool_setup_v2.0.5.9.zip

The reason why no other Firmware works on this box is quite simple - it is not a n200 or k200 ;-)

Multi dtb tool version: v2 .
Multi dtb detected, support 2 dtbs.
aml_dt soc: m8m2 platform: n200C variant: 2G
dtb 0 soc: m8m2 plat: n200C vari: 1G
dtb 1 soc: m8m2 plat: n200C vari: 2G
Find match dtb: 1

It seems that foxluo002 is foxluo@skykirin-Server...

Sorry for my bad english.

[Videophile]

Hi 030theo I am in need of this firmware but cannot download from baidu, can you help?

[030theo]

Hi Videophile,
I would recomment to use the latest ROM: aml_upgrade_package_s812c_mx3_20151027.7z (more resolutions available, faster network, SD-Card support is more stable)..

Hope it helps!

[tonyg]

I got kca-005 1gb ram Model

tried flashing the above firmware with usb burning tool Stuck 2%
any ideas why?