Hi, I'm new to all this and i'm looking for help/advice with my new Arnova 10 G2, I changed the firmware to a custom firmware from this site and everything went smooth "brilliant" but since this my tablet will not charge !! any help regarding this issue would be great or if someone could help me with restoring the tablet back to it's original state so i can return to the retailer for a replacement unit "i'm sure they wont exchange the unit if i have changed the firmware" any help would be very much appreciated ;-)
-
-
What you need to do is install the rockchip batch tool below and than download the firmware from the Arnova website.Originally posted by mickyj70 View Post
Put your tablet into recovery mode and select the downloaded firmware and click upgrade, this will put
Back on the original firmware.
Rockchip ToolPlease consider donating to purchase tablets for Finless Bob to continue his work. This will help in the creation of custom roms and build an even stronger development base for our community. Thank you for you support!
PLEASE CLICK THE DONATE BUTTON BELOW
<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="3GN5JFZXXQLCA">
<input type="image" src="http://www.freaktab.com/attachment.php?attachmentid=565&d=1341333954&thumb =1" border="0" name="submit" alt="PayPal — The safer, easier way to pay online.">
https://www.paypalobjects.com/en_GB/i/scr/pixel.gif
</form> -
Make Sure you flashed your "10 G2" with the correct firmware. When I first found this site I noticed that a new firmware was coming out for the "Capacitive" screen unit. I waited until it was released then flashed. It worked great until my battery needed to charge.... it would NOT take a charge, the charge light was always green. The problem was I flashed my 10 G2 with the 10b G2 firmware, big mistake. Lucky the tablet would run from the charger, so I just reflashed the unit with the proper 10 G2 firmware and it has been perfect ever since.Originally posted by mickyj70 View Post
Comment
-
Ahhh, it seems that this is what i have done !!! it is the 10b G2 that shows as my firmware !! does this mean i have to go back to original firmware or can i just install the correct custom firmware over the the top of the other ??Originally posted by pwolff2000 View PostMake Sure you flashed your "10 G2" with the correct firmware. When I first found this site I noticed that a new firmware was coming out for the "Capacitive" screen unit. I waited until it was released then flashed. It worked great until my battery needed to charge.... it would NOT take a charge, the charge light was always green. The problem was I flashed my 10 G2 with the 10b G2 firmware, big mistake. Lucky the tablet would run from the charger, so I just reflashed the unit with the proper 10 G2 firmware and it has been perfect ever since.
Comment
-
Just install the custom firmware using the method in Bobs read me file in the firmware
Sent from my SK17i using TapatalkPlease consider donating to purchase tablets for Finless Bob to continue his work. This will help in the creation of custom roms and build an even stronger development base for our community. Thank you for you support!
PLEASE CLICK THE DONATE BUTTON BELOW
<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="3GN5JFZXXQLCA">
<input type="image" src="http://www.freaktab.com/attachment.php?attachmentid=565&d=1341333954&thumb =1" border="0" name="submit" alt="PayPal — The safer, easier way to pay online.">
https://www.paypalobjects.com/en_GB/i/scr/pixel.gif
</form>Comment
-
Great advise on this, thank youOriginally posted by pwolff2000 View PostMake Sure you flashed your "10 G2" with the correct firmware. When I first found this site I noticed that a new firmware was coming out for the "Capacitive" screen unit. I waited until it was released then flashed. It worked great until my battery needed to charge.... it would NOT take a charge, the charge light was always green. The problem was I flashed my 10 G2 with the 10b G2 firmware, big mistake. Lucky the tablet would run from the charger, so I just reflashed the unit with the proper 10 G2 firmware and it has been perfect ever since.
Sent from my SK17i using TapatalkPlease consider donating to purchase tablets for Finless Bob to continue his work. This will help in the creation of custom roms and build an even stronger development base for our community. Thank you for you support!
PLEASE CLICK THE DONATE BUTTON BELOW
<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="3GN5JFZXXQLCA">
<input type="image" src="http://www.freaktab.com/attachment.php?attachmentid=565&d=1341333954&thumb =1" border="0" name="submit" alt="PayPal — The safer, easier way to pay online.">
https://www.paypalobjects.com/en_GB/i/scr/pixel.gif
</form>Comment
-
Arnova 10 G2
Hi, thanx for the advice and help, I have followed all the "read me txt" just waiting to see if all is good !! I have noticed that it still says my Tab is a Model "10b G2" but I will see what happens and let you know
once again thanx for the help 
Comment
There are currently 2120 users online. 3 members and 2117 guests.
Most users ever online was 63,956 at 18:56 on 20 March 2025.
Comment