300Mb/s USB WIFI DONGLE RTL8192SU WORKING Solution

[malfrat]

Finally, due that have got many usb wlan adapter i made an error declaring in thead that i use the rtl8192su. in fact it was a 8191su that i use to achieve this to work. But in fact i test it with an other of my wlan that have the rtl8192su chipset and i confirm that it work too, of course this driver work for RTL8712,8191su, 8192su ,8188su ,RTLG8192su ,chipset card. In window xp it install the 8192su driver anyway.

For those who are unsure if the RTL8711.zip driver that i post will work with there usb wireless card they have to be sure that the USB\VID id is in the list of the driver .inf file
here:net8192su.zip

Under window USB\VID id could be found in 'device manager' by clicking on your installed wireless card and go to 'detail' tab than scroll to 'number identification of material'. Sould look like this : USB\Vid_0bda&Pid_8172&Rev_0200

Regards

[Abducted]

something close to 100Mbit/s would be imposible for now due to usb 2.0 specification max real data rate transfer of 60mb/s.
will have to wait for a rockchip board with usb 3.0 first and for the new adopted gigabyte wireless standard promising blazing speeds over short distances was recently adopted by the IEEE. Known as 802.11ad. The ratified standard will deliver 7Gbps speeds over 60GHz frequencies and should appear in consumer electronics as soon as next year. Real data transfer rate would be 4Gbps.But pendrive doesn't support this speed, new ssd drive should be more effective and The hopes of the new technology will be that it'll provide an insanely fast, direct link between devices. The reason behind this is because of the 60GHz frequency it finds itself surfing along. As higher radio frequencies are used, they aren't so good at penetrating solid objects like walls, fridges, desks and more. High frequencies are really only good at shorter ranges, so WiGig will have its place in the market, but not where you'd like it to be.

anyway we never bypass the usb 2.0 real data rate of 60mb/s on all present released tv sticks on market until they have usb 3.0 on the board.Nor bypass the read/write speed of the device (usb hub,pendrive,hard drive,...)

Best regards

I didn't read that thread you linked to before, seems like they are having trouble getting any decent speeds when using ethernet adapters. But i'm still confused about the 60mbit/s real data rate of USB 2.0 you mention? USB 2.0 spec is 480mbit/sec which comes down to 60mbyte/s. Which of course is in theory, but i've copied files from an USB2.0 external drive with speeds around 30mbyte/s (240mbit/s) plenty of times. To be honest i never tested it on my android stick. But USB2.0 certainly isn't holding the transfer speed back. Not if these sticks have normal functioning USB2.0 ports (and USB ethernet/WIFI drivers ).

[MattWest]

USB Network

Normal tool for testing networkpreformanc its Netperf its very good but i have not finding it for Android.
Have testing iPerf for Android and also with Win 7 64 and its looks working OK.

I have one AX88772A USBlan adapter to My MK802IIIS and it can both sending and reciving at 90 to 95 Mbits/sec over 120 secunds (2 minutes).

The Windows 7 PC and the networkrouter have GB links in ful duplex.


Comand in the client(windows) iperf.exe -c 192.168.2.126 -t 120
Command in the server (Android) -s

------------------------------------------------------------
Client connecting to 192.168.2.126, TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[156] local 192.168.2.1 port 51079 connected with 192.168.2.126 port 5001
[ ID] Interval Transfer Bandwidth
[156] 0.0-120.0 sec 1.28 GBytes 91.9 Mbits/sec


Comand in the server(windows) iperf.exe -s
Command in the client (Android) -c 192.168.2.1 -t 120

------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[172] local 192.168.2.1 port 5001 connected with 192.168.2.126 port 49343
[ ID] Interval Transfer Bandwidth
[172] 0.0-120.1 sec 1.31 GBytes 94.0 Mbits/sec


Trying copy files over lan to SD-cards its not working good then the card normaly its slow and the speed its not constant. Trye copy to interna flash its normaly faster and not changing speed upp and down.
Checking the true speed of Your SD-cards and You its finding the speed its coing up and down then You is testing them.

iPerf Windows You can find if You is search for it on the net (iperf-2.0.4-win32.zip wos working for My) and iPerf for Android You find in the store .

Mvh Mattias

[Abducted]

Excellent info MattWest! Thanks! Others are however having no such luck it seems. They are probably testing in a different way with a different bottleneck as a result.

[renansantos]

help with drivers

Excellent info MattWest! Thanks! Others are however having no such luck it seems. They are probably testing in a different way with a different bottleneck as a result.

Someone can help me to find driver of this antenna

http://produto.mercadolivre.com.br/MLB-565246604-mini-adaptador-usb-wifi-rede-wireless-realtek-rtl8188cu-_JM

thanks!!

[malfrat]

Someone can help me to find driver of this antenna

http://produto.mercadolivre.com.br/MLB-565246604-mini-adaptador-usb-wifi-rede-wireless-realtek-rtl8188cu-_JM

thanks!!

it would not work the way i explain with the android ui. try to get the right usb wlan.

http://www.cafr.****.ca/itm/BetterRe...item3ce429219c

[renansantos]

hmm ok thanks

i will try solding a antenna

thanks

[renansantos]

it would not work the way i explain with the android ui. try to get the right usb wlan.

http://www.cafr.****.ca/itm/BetterRe...item3ce429219c

hey guy,this work??

http://produto.mercadolivre.com.br/MLB-564307284-adaptador-usb-wireless-80211n-300mbps-skylink-wifi-realtek-_JM

[adrian123]

Not working on finless 2.1

I have a great and easy solution for rtl8192su work great at 300mbps for me with finless 1.7

Download the driver:
rtl8711.zip

With help of root browser available on play store for free
Go to /system/lib/modules/ renaname the rkwifi.ko to rkwifi.ko.old (to keep a backup)
put 8187.ko into /system/lib/modules/ and rename it to rkwifi.ko
set permission of our new rkwifi.ko to 644 rw-r--r--


Reboot and now now you could see a lot more neighbor APs..... it work i promise

(to reinstall built-in mk808b wifi, delete the rkwifi.ko and rename the backup (rkwifi.ko.old) to rkwifi.ko and reboot)

ftp transfer stable and UNCUT. I can now move more than 12 movies 'torrented' and more at stable 4,79 MB/s to my pc from mk808b 32go usb pen drive.


i made a sticky ?

Hi
I have problem with this driver i have mk808 dual core and finless 2.1 rom
i do everything exactly how You describe it
but after reebot wifi wont start i click on and it offs automaticly any ideas ?
thanks for help

[mo123]

Hi
I have problem with this driver i have mk808 dual core and finless 2.1 rom
i do everything exactly how You describe it
but after reebot wifi wont start i click on and it offs automaticly any ideas ?
thanks for help

Because you are using Android 4.1 drivers on an Android 4.2 ROM.

[adrian123]

Because you are using Android 4.1 drivers on an Android 4.2 ROM.

Thanks, You know how to solve this ?

[mo123]

Thanks, You know how to solve this ?

Are you trying to use usb wifi adaptor on Finless 2.1 ROM?
Then
In terminal app(download from Play Store or the *.apk and install)
Type su then insmod /system/lib/modules/rtl8192cu.ko
Substitute the *.ko file with the wifi module you want to load.

[adrian123]

Are you trying to use usb wifi adaptor on Finless 2.1 ROM?
Then
In terminal app(download from Play Store or the *.apk and install)
Type su then insmod /system/lib/modules/rtl8192cu.ko
Substitute the *.ko file with the wifi module you want to load.

Doesn't work it shows: init_module ( exec format error)

[adrian123]

And yes im trying to usb wifi adaptor like in the thread to increase wifi signal and speed

[malfrat]

i got 3 usb wifi adapter with this chipset. 2 of them are more stable if i plug into powered usb hub and avoid the on/off module won't load problem.