Updated kernel and MicroSD image for rk3066 ubuntu

[hoabycsr]

This is a kernel I compiled and am using on an imito mx1. It has also been tested on a ug802. Also I have included the filesystem I´m using which is a somewhat large download but if you want an easy setup, download it and burn it to your MicroSD card. If you are already using an alok+ kernel, you can just download my recovery image and the modules folder - replace your current lib/modules/3.0.8-alok+ with this folder. This setup allows cd/dvd access (with full r/w) and gpu acceleration.

http://www.hoaby.com/android/JJH1.0recovery.img - flash this to your device.

http://www.hoaby.com/android/jjhmixedbag.rar - my linuxroot filesystem. Burn it to MicroSD. I apologize for the large download. Both passwords are ubuntu.

http://www.hoaby.com/android/3.0.8-alok+JJH1.0.tar.gz - modules folder if already using picuntu-type kernel (alok+)

[hansheijkoop]

wow, clean and fast plug and play

Thanks, for the good work. I installed this image on a Rikomagic 802IIIs 8gb with wifi and bluethooth. After connecting usb-lan the stick just work, play music and edit libre-office documents.

[leolas]

Re: Updated kernel and MicroSD image for rk3066 ubuntu

This is a kernel I compiled and am using on an imito mx1. It has also been tested on a ug802. Also I have included the filesystem I´m using which is a somewhat large download but if you want an easy setup, download it and burn it to your MicroSD card. If you are already using an alok+ kernel, you can just download my recovery image and the modules folder - replace your current lib/modules/3.0.8-alok+ with this folder. This setup allows cd/dvd access (with full r/w) and gpu acceleration.

http://www.hoaby.com/android/JJH1.0recovery.img - flash this to your device.

http://www.hoaby.com/android/jjhmixedbag.rar - my linuxroot filesystem. Burn it to MicroSD. I apologize for the large download. Both passwords are ubuntu.

http://www.hoaby.com/android/3.0.8-alok+JJH1.0.tar.gz - modules folder if already using picuntu-type kernel (alok+)

If you want, you can use the new 3.0.36 kernel sources, they works very well in picuntu. You can get them from galland github.

leolas

[MattWest]

3.0.36

I wos installing his 3.0.36 on my KM802IIIS with a Asix USB-Lan adapter on a RC3 rootfilesystem.
Wos having problem gething the Asix working as it wos no new module with, but it wos easyer, it wos bildin the kernel and showingup as /dev/eth3

How I have geth the HW grafic working but its kinky on monitors dont like my samsung 26" monitor (full HD but 1920*1200) only the ours LS 42".

Easy to install only new modules and kernel (source or image) and if You have a good RC3 rootfilesystem the HW grafic its working out of the box .

http://hwswbits.blogspot.co.at/2013/05/unofficial-new-3036-kernel-for-picuntu.html

Mvh Mattias

[hoabycsr]

If you want, you can use the new 3.0.36 kernel sources, they works very well in picuntu. You can get them from galland github.

leolas

Mayhap I'll look into that. Thanks!

Also I should say that I´ve left this unit running for somewhere around 3 weeks straight with no problems/freeze-ups whatsoever. Not that I shut it down, just rebooted for one reason or another. I however have no doubt that if I left my device on it would stay just as rock solid for months on end. And I am using it as a full desktop computer for as much as I can. Which at this point is about everything... except the windows rockchip flashing tools ; ;

[hoabycsr]

Thanks, for the good work. I installed this image on a Rikomagic 802IIIs 8gb with wifi and bluethooth. After connecting usb-lan the stick just work, play music and edit libre-office documents.

I appreciate your gratitude. I often wonder if people use anything I post on here for download. I should add that this image also has qemu installed with full video options. I had to compile it to get it to work, tried to install windows xp on it for a specific use, and found it was waaaayyy too slow for that. But regardless it´s in there as well. Thanks again for your kind post!

[tgatewood]

This is a kernel I compiled and am using on an imito mx1. It has also been tested on a ug802. Also I have included the filesystem I´m using which is a somewhat large download but if you want an easy setup, download it and burn it to your MicroSD card. If you are already using an alok+ kernel, you can just download my recovery image and the modules folder - replace your current lib/modules/3.0.8-alok+ with this folder. This setup allows cd/dvd access (with full r/w) and gpu acceleration.

http://www.hoaby.com/android/JJH1.0recovery.img - flash this to your device.

http://www.hoaby.com/android/jjhmixedbag.rar - my linuxroot filesystem. Burn it to MicroSD. I apologize for the large download. Both passwords are ubuntu.

http://www.hoaby.com/android/3.0.8-alok+JJH1.0.tar.gz - modules folder if already using picuntu-type kernel (alok+)

Hi, I was trying to burn this to an SD card but the image was unreadable. I used gnome-disks. What do you recommend I use to get the img file to my SD card?

Thanks!

[ramoncio]

Hi, I was trying to burn this to an SD card but the image was unreadable. I used gnome-disks. What do you recommend I use to get the img file to my SD card?

Thanks!

WARNING!!!!!!
First make sure your usb stick is /dev/sdb as this will completly WIPE it.

mkdir linuxroot
cd linuxroot
wget linuxrooot-ubuntu.tgz   #or whatever its name is
tar xfvz linuxrooot-ubuntu.tgz
rm linuxrooot-ubuntu.tgz
#NEXT COMMAND DELETES /dev/sdb CONTENTS!!!!
(echo d; echo n; echo p; echo 1; echo 1; echo ; echo w) | fdisk /dev/sdb  # or manually create a linux partition with fdisk
mkfs.ext4 -O ^has_journal /dev/sdb1
mkdir -p /mnt/sdb1
mount -t ext4 /dev/sdb1 /mnt/sdb1
cp -a * /mnt/sdb1
sync
umount /mnt/sdb1

[plani]

Today my UG007 (MX1) runs uder Finless 2.0. - What must I do to get an dual bottsystem with linux and android. - It was good to wrote a way simple for dummys