help Unbrick M8s V1.1

[patricx]

Can someone tell me how i can unbrick this board "http://i.imgur.com/TTA4kpv.jpg" i have try the usb burn tool but it stop in 2 seconds and i try a the sd card but notings work.
when i power the board the blue led is only flash one time.

do i used the wrong firmware ?
do i need to make a connection on the board ?

Please help me.

[patricx]

Please tell me the firmware version i have to use.

[baroloboys]

Hi,
I have the same m8s version. did you find any firmware that is working?

[patricx]

No i have search a lot of hours and try al lot of img but none are working

[piperider]

did you try the one just me posted?

[baroloboys]

wich one?

[piperider]

sorry posted in the wrong thread but I wonder would the m8s v1.0 firmware work I posted firmware that worked on those basically everything worked great except light was red instead of blue

[domp3]

Hello i have same box.I can help you. I have same problem with my box.I debricked my box by this way.
1By using USB_burning_tool I have loaded
cyx_m8s_v8.6_ap6330_8g2g_kodi_addons_ota_150908_US B.img
2 by SD (even without Boot Card Maker only format to fat32)
I have loaded: n200c (n200C-ota-20151110.zip).If you need link i give you later

[Kezz]

Link Please and Than you!!!

[patricx]

hello domp3 can you send the links.

Thanks.

[domp3]

ok 1 link for burn https://drive.google.com/file/d/0B0k...w?pref=2&pli=1
2 link for sd https://yadi.sk/d/WrvdDd-kpqf63

[Kezz]

Many Thanx for the Links!!!

[patricx]

hello domp3 do you have do extra thinks because i get a error when i flash the img.

[Kezz]

Actually I only get to 4% I have yet to find an Image that works although domp3 the Image you posted did work for me Twice Before but not now!!! Thnax

[domp3]

its very interesting See foto and find differences https://yadi.sk/i/xMgh8_uUpwtP6 .I don't find . The first file need to flash with usb burning tool