Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

A10 chipset CKK PAD MID-008a Need firmware..

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    A10 chipset CKK PAD MID-008a Need firmware..

    A10 chipset stuck on logo i flash it in other firmware it is sucessfully but the touch screen didn't
    work.. I need a compatible firmware for my tablet pls..

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]
    Tags: None
    #2
    You may have flashed a ROM that erased the EEPROM to control the screen. Rockchip never has this problem because they do not do this. But A10 EASILY can do this! In fact this is a common problem!

    Even if you get the stock ROM, your screen may not work because the stock ROM does not flash the screen EEPROM!

    See my post here about all this. I made the same mistake and spent a long time learning to recover it.

    http://www.freaktab.com/showthread.p...X-touch-screen!


    Bob
    "Pzebacz im, bo nie wiedzą, co czynią"
    "Прости им, они не ведают, что творят"
    "Perdona loro perché non sanno quello che fanno"
    "Vergib ihnen, denn sie wissen nicht, was sie tun"
    "Vergeef hen want ze weten niet wat ze doen"
    "Pardonne-leur car ils ne savent pas ce qu'ils font"
    "Perdónalos porque no saben que lo que hacen"
    "Oprosti im, jer ne znaju što čine"
    "Forgive them as they know not what they do"





    Comment

      #3
      Originally posted by Finless View Post
      You may have flashed a ROM that erased the EEPROM to control the screen. Rockchip never has this problem because they do not do this. But A10 EASILY can do this! In fact this is a common problem!

      Even if you get the stock ROM, your screen may not work because the stock ROM does not flash the screen EEPROM!

      See my post here about all this. I made the same mistake and spent a long time learning to recover it.

      http://www.freaktab.com/showthread.p...X-touch-screen!


      Bob
      so you mean i can flash my tablet in a diferrent rom and i can fix my touchscreen by your post in here??

      http://www.freaktab.com/showthread.p...X-touch-screen!

      can you help me sir to fix my tablet? what should i do first?
      i flash these firware i am using livesuite and sucessfully done but my problem i dont know how to fix the touch screen can you give me a firmware?


      [IMG][/IMG]

      Comment

        #4
        this is the script.bin dump in my tablet sir can you check it for me..?

        [product]
        version = "1.0"
        machine = "A10-EVB-V1.2"

        [target]
        power_start = 0
        boot_clock = 1008
        dcdc2_vol = 1400
        dcdc3_vol = 1250
        ldo2_vol = 3000
        ldo3_vol = 2800
        ldo4_vol = 2800
        pll4_freq = 960
        pll6_freq = 960
        storage_type = 0

        [card_boot]
        logical_start = 40960
        sprite_gpio0 =

        [card_boot0_para]
        card_ctrl = 0
        card_high_speed = 1
        card_line = 4
        sdc_d1 = port:PF0<2><1><default><default>
        sdc_d0 = port:PF1<2><1><default><default>
        sdc_clk = port:PF2<2><1><default><default>
        sdc_cmd = port:PF3<2><1><default><default>
        sdc_d3 = port:PF4<2><1><default><default>
        sdc_d2 = port:PF5<2><1><default><default>

        [card_boot2_para]
        card_ctrl = 2
        card_high_speed = 1
        card_line = 4
        sdc_cmd = port:PC6<3><1><default><default>
        sdc_clk = port:PC7<3><1><default><default>
        sdc_d0 = port:PC8<3><1><default><default>
        sdc_d1 = port:PC9<3><1><default><default>
        sdc_d2 = port:PC10<3><1><default><default>
        sdc_d3 = port:PC11<3><1><default><default>

        [twi_para]
        twi_port = 0
        twi_scl = port:PB0<2><default><default><default>
        twi_sda = port:PB1<2><default><default><default>

        [uart_para]
        uart_debug_port = 0
        uart_debug_tx = port:PB22<2><1><default><default>
        uart_debug_rx = port:PB23<2><1><default><default>

        [jtag_para]
        jtag_enable = 0
        jtag_ms = port:PB14<3><default><default><default>
        jtag_ck = port:PB15<3><default><default><default>
        jtag_do = port:PB16<3><default><default><default>
        jtag_di = port:PB17<3><default><default><default>

        [dram_para]
        dram_baseaddr = 0x40000000
        dram_clk = 408
        dram_type = 3
        dram_rank_num =
        dram_chip_density =
        dram_io_width =
        dram_bus_width =
        dram_cas = 6
        dram_zq = 123
        dram_odt_en = 0
        dram_size =
        dram_tpr0 = 0x30926692
        dram_tpr1 = 4240
        dram_tpr2 = 0x1a0c8
        dram_tpr3 = 0
        dram_tpr4 = 0
        dram_tpr5 = 0
        dram_emr1 = 4
        dram_emr2 = 0
        dram_emr3 = 0

        [mali_para]
        mali_used = 1
        mali_clkdiv = 3

        [g2d_para]
        g2d_used = 1
        g2d_size = 0x1000000

        [emac_para]
        emac_used = 0
        emac_rxd3 = port:PA0<2><default><default><default>
        emac_rxd2 = port:PA1<2><default><default><default>
        emac_rxd1 = port:PA2<2><default><default><default>
        emac_rxd0 = port:PA3<2><default><default><default>
        emac_txd3 = port:PA4<2><default><default><default>
        emac_txd2 = port:PA5<2><default><default><default>
        emac_txd1 = port:PA6<2><default><default><default>
        emac_txd0 = port:PA7<2><default><default><default>
        emac_rxclk = port:PA8<2><default><default><default>
        emac_rxerr = port:PA9<2><default><default><default>
        emac_rxdV = port:PA10<2><default><default><default>
        emac_mdc = port:PA11<2><default><default><default>
        emac_mdio = port:PA12<2><default><default><default>
        emac_txen = port:PA13<2><default><default><default>
        emac_txclk = port:PA14<2><default><default><default>
        emac_crs = port:PA15<2><default><default><default>
        emac_col = port:PA16<2><default><default><default>
        emac_reset = port:PA17<1><default><default><default>

        [twi0_para]
        twi0_used = 1
        twi0_scl = port:PB0<2><default><default><default>
        twi0_sda = port:PB1<2><default><default><default>

        [twi1_para]
        twi1_used = 1
        twi1_scl = port:PB18<2><default><default><default>
        twi1_sda = port:PB19<2><default><default><default>

        [twi2_para]
        twi2_used = 1
        twi2_scl = port:PB20<2><default><default><default>
        twi2_sda = port:PB21<2><default><default><default>

        [uart_para0]
        uart_used = 1
        uart_port = 0
        uart_type = 2
        uart_tx = port:PB22<2><1><default><default>
        uart_rx = port:PB23<2><1><default><default>

        [uart_para1]
        uart_used = 0
        uart_port = 1
        uart_type = 8
        uart_tx = port:PA10<4><1><default><default>
        uart_rx = port:PA11<4><1><default><default>
        uart_rts = port:PA12<4><1><default><default>
        uart_cts = port:PA13<4><1><default><default>
        uart_dtr = port:PA14<4><1><default><default>
        uart_dsr = port:PA15<4><1><default><default>
        uart_dcd = port:PA16<4><1><default><default>
        uart_ring = port:PA17<4><1><default><default>

        [uart_para2]
        uart_used = 1
        uart_port = 2
        uart_type = 4
        uart_tx = port:PI18<3><1><default><default>
        uart_rx = port:PI19<3><1><default><default>
        uart_rts = port:PI16<3><1><default><default>
        uart_cts = port:PI17<3><1><default><default>

        [uart_para3]
        uart_used = 0
        uart_port = 3
        uart_type = 4
        uart_tx = port:PH0<4><1><default><default>
        uart_rx = port:PH1<4><1><default><default>
        uart_rts = port:PH2<4><1><default><default>
        uart_cts = port:PH3<4><1><default><default>

        [uart_para4]
        uart_used = 0
        uart_port = 4
        uart_type = 2
        uart_tx = port:PH4<4><1><default><default>
        uart_rx = port:PH5<4><1><default><default>

        [uart_para5]
        uart_used = 0
        uart_port = 5
        uart_type = 2
        uart_tx = port:PH6<4><1><default><default>
        uart_rx = port:PH7<4><1><default><default>

        [uart_para6]
        uart_used = 0
        uart_port = 6
        uart_type = 2
        uart_tx = port:PA12<4><1><default><default>
        uart_rx = port:PA13<4><1><default><default>

        [uart_para7]
        uart_used = 0
        uart_port = 7
        uart_type = 2
        uart_tx = port:PA14<4><1><default><default>
        uart_rx = port:PA15<4><1><default><default>

        [spi0_para]
        spi_used = 0
        spi_cs0 = port:PI10<3><default><default><default>
        spi_cs1 = port:PI14<3><default><default><default>
        spi_sclk = port:PI11<3><default><default><default>
        spi_mosi = port:PI12<3><default><default><default>
        spi_miso = port:PI13<3><default><default><default>

        [spi1_para]
        spi_used = 0
        spi_cs0 = port:PA0<4><default><default><default>
        spi_cs1 = port:PA4<4><default><default><default>
        spi_sclk = port:PI1<4><default><default><default>
        spi_mosi = port:PI2<4><default><default><default>
        spi_miso = port:PI3<4><default><default><default>

        [spi2_para]
        spi_used = 0
        spi_cs0 = port:PC19<3><default><default><default>
        spi_cs1 =
        spi_sclk = port:PC20<3><default><default><default>
        spi_mosi = port:PC21<3><default><default><default>
        spi_miso = port:PC22<3><default><default><default>

        [spi3_para]
        spi_used = 0
        spi_cs0 = port:PA5<4><default><default><default>
        spi_cs1 = port:PA9<4><default><default><default>
        spi_sclk = port:PI6<4><default><default><default>
        spi_mosi = port:PI7<4><default><default><default>
        spi_miso = port:PI8<4><default><default><default>

        [rtp_para]
        rtp_used = 0
        rtp_screen_size = 7
        rtp_regidity_level = 7
        rtp_press_threshold_enable = 0
        rtp_press_threshold = 8000
        rtp_sensitive_level = 15
        rtp_exchange_x_y_flag = 0

        [ctp_para]
        ctp_boxchip_type = 2576
        ctp_used = 1
        ctp_twi_id = 2
        ctp_name = "ft5x_ts"
        ctp_twi_addr = 0x38
        ctp1_used = 1
        ctp1_name = "Goodix-TS"
        ctp1_twi_addr = 0x55
        ctp2_used = 0
        ctp2_name = "ssd253x-ts"
        ctp2_twi_addr = 0x48
        ctp2_ssd_type = 0x111d5
        ctp3_used = 1
        ctp3_name = "novatek-ts"
        ctp3_twi_addr = 0x9
        ctp4_used = 1
        ctp4_name = "zet622x-ts"
        ctp4_twi_addr = 0x76
        ctp5_used = 1
        ctp5_name = "byd693x-ts"
        ctp5_twi_addr = 0x52
        cpt_screen_rotate = 0
        ctp_screen_max_x = 800
        ctp_screen_max_y = 600
        ctp_revert_x_flag = 0
        ctp_revert_y_flag = 0
        ctp_exchange_x_y_flag = 0
        ctp_havekey = 1
        ctp_int_port = port:PH21<6><default><default><default>
        ctp_wakeup = port:PB13<1><default><default><1>
        ctp_io_port = port:PH21<0><default><default><default>

        [tkey_para]
        tkey_used = 0
        tkey_name = "hv_keypad"
        tkey_twi_id = 2
        tkey_twi_addr = 0x62
        tkey_int = port:PI13<6><default><default><default>

        [motor_para]
        motor_used = 0
        motor_shake = port:PB3<1><default><default><1>

        [nand_para]
        nand_used = 1
        nand_we = port:PC0<2><default><default><default>
        nand_ale = port:PC1<2><default><default><default>
        nand_cle = port:PC2<2><default><default><default>
        nand_ce1 = port:PC3<2><default><default><default>
        nand_ce0 = port:PC4<2><default><default><default>
        nand_nre = port:PC5<2><default><default><default>
        nand_rb0 = port:PC6<2><default><default><default>
        nand_rb1 = port:PC7<2><default><default><default>
        nand_d0 = port:PC8<2><default><default><default>
        nand_d1 = port:PC9<2><default><default><default>
        nand_d2 = port:PC10<2><default><default><default>
        nand_d3 = port:PC11<2><default><default><default>
        nand_d4 = port:PC12<2><default><default><default>
        nand_d5 = port:PC13<2><default><default><default>
        nand_d6 = port:PC14<2><default><default><default>
        nand_d7 = port:PC15<2><default><default><default>
        nand_wp = port:PC16<2><default><default><default>
        nand_ce2 = port:PC17<2><default><default><default>
        nand_ce3 = port:PC18<2><default><default><default>
        nand_ce4 =
        nand_ce5 =
        nand_ce6 =
        nand_ce7 =
        nand_spi = port:PC23<3><default><default><default>
        nand_ndqs = port:PC24<2><default><default><default>

        [disp_init]
        disp_init_enable = 1
        disp_mode = 0
        screen0_output_type = 1
        screen0_output_mode = 4
        screen1_output_type = 1
        screen1_output_mode = 4
        fb0_framebuffer_num = 2
        fb0_format = 10
        fb0_pixel_sequence = 0
        fb0_scaler_mode_enable = 0
        fb1_framebuffer_num = 2
        fb1_format = 10
        fb1_pixel_sequence = 0
        fb1_scaler_mode_enable = 0

        [lcd0_para]
        lcd_used = 1
        lcd_pwm_not_used = 0
        lcd_pwm_ch = 0
        lcd_pwm_freq = 10000
        lcd_pwm_pol = 1
        lcd_x = 800
        lcd_y = 600
        lcd_dclk_freq = 40
        lcd_if = 0
        lcd_hbp = 46
        lcd_ht = 1056
        lcd_vbp = 23
        lcd_vt = 1270
        lcd_hv_if = 0
        lcd_hv_smode = 0
        lcd_hv_s888_if = 0
        lcd_hv_syuv_if = 0
        lcd_hv_vspw = 0
        lcd_hv_hspw = 0
        lcd_lvds_ch = 0
        lcd_lvds_mode = 0
        lcd_lvds_bitwidth = 0
        lcd_lvds_io_cross = 0
        lcd_cpu_if = 0
        lcd_frm = 0
        lcd_io_cfg0 = 0x10000000
        lcd_gamma_correction_en = 0
        lcd_gamma_tbl_0 = 0
        lcd_gamma_tbl_1 = 0x10101
        lcd_gamma_tbl_255 = 0xffffff
        lcd_bl_en_used = 1
        lcd_bl_en = port:PH7<1><0><default><1>
        lcd_power_used = 1
        lcd_power = port:PH8<1><0><default><1>
        lcd_pwm_used = 1
        lcd_pwm = port:PB2<2><0><default><default>
        lcd_gpio_0 =
        lcd_gpio_1 =
        lcd_gpio_2 =
        lcd_gpio_3 =
        lcdd0 = port:PD0<2><0><default><default>
        lcdd1 = port:PD1<2><0><default><default>
        lcdd2 = port:PD2<2><0><default><default>
        lcdd3 = port:PD3<2><0><default><default>
        lcdd4 = port:PD4<2><0><default><default>
        lcdd5 = port:PD5<2><0><default><default>
        lcdd6 = port:PD6<2><0><default><default>
        lcdd7 = port:PD7<2><0><default><default>
        lcdd8 = port:PD8<2><0><default><default>
        lcdd9 = port:PD9<2><0><default><default>
        lcdd10 = port:PD10<2><0><default><default>
        lcdd11 = port:PD11<2><0><default><default>
        lcdd12 = port:PD12<2><0><default><default>
        lcdd13 = port:PD13<2><0><default><default>
        lcdd14 = port:PD14<2><0><default><default>
        lcdd15 = port:PD15<2><0><default><default>
        lcdd16 = port:PD16<2><0><default><default>
        lcdd17 = port:PD17<2><0><default><default>
        lcdd18 = port:PD18<2><0><default><default>
        lcdd19 = port:PD19<2><0><default><default>
        lcdd20 = port:PD20<2><0><default><default>
        lcdd21 = port:PD21<2><0><default><default>
        lcdd22 = port:PD22<2><0><default><default>
        lcdd23 = port:PD23<2><0><default><default>
        lcdclk = port:PD24<2><0><default><default>
        lcdde = port:PD25<2><0><default><default>
        lcdhsync = port:PD26<2><0><default><default>
        lcdvsync = port:PD27<2><0><default><default>

        [lcd1_para]
        lcd_used = 0
        lcd_x = 0
        lcd_y = 0
        lcd_dclk_freq = 0
        lcd_pwm_not_used = 0
        lcd_pwm_ch = 1
        lcd_pwm_freq = 0
        lcd_pwm_pol = 0
        lcd_if = 0
        lcd_hbp = 0
        lcd_ht = 0
        lcd_vbp = 0
        lcd_vt = 0
        lcd_hv_if = 0
        lcd_hv_smode = 0
        lcd_hv_s888_if = 0
        lcd_hv_syuv_if = 0
        lcd_hv_vspw = 0
        lcd_hv_hspw = 0
        lcd_lvds_ch = 0
        lcd_lvds_mode = 0
        lcd_lvds_bitwidth = 0
        lcd_lvds_io_cross = 0
        lcd_cpu_if = 0
        lcd_frm = 0
        lcd_io_cfg0 = 0
        lcd_gamma_correction_en = 0
        lcd_gamma_tbl_0 = 0
        lcd_gamma_tbl_1 = 0x10101
        lcd_gamma_tbl_255 = 0xffffff
        lcd_bl_en_used = 0
        lcd_bl_en =
        lcd_power_used = 0
        lcd_power =
        lcd_pwm_used = 1
        lcd_pwm = port:PI3<2><0><default><default>
        lcd_gpio_0 =
        lcd_gpio_1 =
        lcd_gpio_2 =
        lcd_gpio_3 =
        lcdd0 = port:PH0<2><0><default><default>
        lcdd1 = port:PH1<2><0><default><default>
        lcdd2 = port:PH2<2><0><default><default>
        lcdd3 = port:PH3<2><0><default><default>
        lcdd4 = port:PH4<2><0><default><default>
        lcdd5 = port:PH5<2><0><default><default>
        lcdd6 = port:PH6<2><0><default><default>
        lcdd7 = port:PH7<2><0><default><default>
        lcdd8 = port:PH8<2><0><default><default>
        lcdd9 = port:PH9<2><0><default><default>
        lcdd10 = port:PH10<2><0><default><default>
        lcdd11 = port:PH11<2><0><default><default>
        lcdd12 = port:PH12<2><0><default><default>
        lcdd13 = port:PH13<2><0><default><default>
        lcdd14 = port:PH14<2><0><default><default>
        lcdd15 = port:PH15<2><0><default><default>
        lcdd16 = port:PH16<2><0><default><default>
        lcdd17 = port:PH17<2><0><default><default>
        lcdd18 = port:PH18<2><0><default><default>
        lcdd19 = port:PH19<2><0><default><default>
        lcdd20 = port:PH20<2><0><default><default>
        lcdd21 = port:PH21<2><0><default><default>
        lcdd22 = port:PH22<2><0><default><default>
        lcdd23 = port:PH23<2><0><default><default>
        lcdclk = port:PH24<2><0><default><default>
        lcdde = port:PH25<2><0><default><default>
        lcdhsync = port:PH26<2><0><default><default>
        lcdvsync = port:PH27<2><0><default><default>

        [tv_out_dac_para]
        dac_used = 1
        dac0_src = 4
        dac1_src = 5
        dac2_src = 6
        dac3_src = 0

        [csi0_para]
        csi_used = 1
        csi_mode = 0
        csi_dev_qty = 1
        csi_stby_mode = 1
        csi_mname = "gc0308"
        csi_twi_id = 1
        csi_twi_addr = 0x42
        csi_if = 0
        csi_vflip = 0
        csi_hflip = 0
        csi_iovdd = ""
        csi_avdd = ""
        csi_dvdd = ""
        csi_flash_pol = 1
        csi_mname_b = "gt2005"
        csi_twi_id_b = 1
        csi_twi_addr_b = 0x78
        csi_if_b = 0
        csi_vflip_b = 0
        csi_hflip_b = 0
        csi_iovdd_b = ""
        csi_avdd_b = ""
        csi_dvdd_b = ""
        csi_flash_pol_b = 1
        csi_pck = port:PE0<3><default><default><default>
        csi_ck = port:PE1<3><default><default><default>
        csi_hsync = port:PE2<3><default><default><default>
        csi_vsync = port:PE3<3><default><default><default>
        csi_d0 = port:PE4<3><default><default><default>
        csi_d1 = port:PE5<3><default><default><default>
        csi_d2 = port:PE6<3><default><default><default>
        csi_d3 = port:PE7<3><default><default><default>
        csi_d4 = port:PE8<3><default><default><default>
        csi_d5 = port:PE9<3><default><default><default>
        csi_d6 = port:PE10<3><default><default><default>
        csi_d7 = port:PE11<3><default><default><default>
        csi_d8 =
        csi_d9 =
        csi_d10 =
        csi_d11 =
        csi_d12 =
        csi_d13 =
        csi_d14 =
        csi_d15 =
        csi_reset = port:PH13<1><default><default><0>
        csi_power_en = port:PH16<1><default><default><0>
        csi_stby = port:PH18<1><default><default><0>
        csi_flash =
        csi_af_en =
        csi_reset_b = port:PH13<1><default><default><0>
        csi_power_en_b = port:PH16<1><default><default><0>
        csi_stby_b = port:PH19<1><default><default><0>
        csi_flash_b =
        csi_af_en_b =

        [csi1_para]
        csi_used = 0
        csi_mode = 0
        csi_dev_qty = 1
        csi_stby_mode = 1
        csi_mname = ""
        csi_twi_id = 1
        csi_twi_addr = 0xba
        csi_if = 0
        csi_vflip = 0
        csi_hflip = 0
        csi_iovdd = ""
        csi_avdd = ""
        csi_dvdd = ""
        csi_flash_pol = 1
        csi_mname_b = ""
        csi_twi_id_b = 1
        csi_twi_addr_b = 0x78
        csi_if_b = 0
        csi_vflip_b = 1
        csi_hflip_b = 0
        csi_iovdd_b = ""
        csi_avdd_b = ""
        csi_dvdd_b = ""
        csi_flash_pol_b = 1
        csi_pck = port:PG0<3><default><default><default>
        csi_ck = port:PG1<3><default><default><default>
        csi_hsync = port:PG2<3><default><default><default>
        csi_vsync = port:PG3<3><default><default><default>
        csi_field =
        csi_d0 = port:PG4<3><default><default><default>
        csi_d1 = port:PG5<3><default><default><default>
        csi_d2 = port:PG6<3><default><default><default>
        csi_d3 = port:PG7<3><default><default><default>
        csi_d4 = port:PG8<3><default><default><default>
        csi_d5 = port:PG9<3><default><default><default>
        csi_d6 = port:PG10<3><default><default><default>
        csi_d7 = port:PG11<3><default><default><default>
        csi_d8 =
        csi_d9 =
        csi_d10 =
        csi_d11 =
        csi_d12 =
        csi_d13 =
        csi_d14 =
        csi_d15 =
        csi_d16 =
        csi_d17 =
        csi_d18 =
        csi_d19 =
        csi_d20 =
        csi_d21 =
        csi_d22 =
        csi_d23 =
        csi_reset = port:PH14<1><default><default><0>
        csi_power_en =
        csi_stby = port:PH17<1><default><default><0>
        csi_flash =
        csi_af_en =
        csi_reset_b =
        csi_power_en_b =
        csi_stby_b =
        csi_flash_b =
        csi_af_en_b =

        [tvout_para]
        tvout_used = 0
        tvout_channel_num = 1
        tv_en = port:PI12<1><default><default><0>

        [tvin_para]
        tvin_used = 0
        tvin_channel_num = 4

        [sata_para]
        sata_used = 0
        sata_power_en =

        [mmc0_para]
        sdc_used = 1
        sdc_detmode = 1
        bus_width = 4
        sdc_d1 = port:PF0<2><1><2><default>
        sdc_d0 = port:PF1<2><1><2><default>
        sdc_clk = port:PF2<2><1><2><default>
        sdc_cmd = port:PF3<2><1><2><default>
        sdc_d3 = port:PF4<2><1><2><default>
        sdc_d2 = port:PF5<2><1><2><default>
        sdc_det = port:PH1<0><1><default><default>
        sdc_use_wp = 0
        sdc_wp =

        [mmc1_para]
        sdc_used = 0
        sdc_detmode = 1
        bus_width = 4
        sdc_cmd = port:PH22<5><1><2><default>
        sdc_clk = port:PH23<5><1><2><default>
        sdc_d0 = port:PH24<5><1><2><default>
        sdc_d1 = port:PH25<5><1><2><default>
        sdc_d2 = port:PH26<5><1><2><default>
        sdc_d3 = port:PH27<5><1><2><default>
        sdc_det = port:PH2<0><1><default><default>
        sdc_use_wp = 0
        sdc_wp =

        [mmc2_para]
        sdc_used = 0

        [mmc3_para]
        sdc_used = 0
        sdc_detmode = 1
        bus_width = 4
        sdc_cmd = port:PI4<2><1><2><default>
        sdc_clk = port:PI5<2><1><2><default>
        sdc_d0 = port:PI6<2><1><2><default>
        sdc_d1 = port:PI7<2><1><2><default>
        sdc_d2 = port:PI8<2><1><2><default>
        sdc_d3 = port:PI9<2><1><2><default>
        sdc_det =
        sdc_use_wp = 0
        sdc_wp =

        [ms_para]
        ms_used = 0
        ms_bs = port:PH6<5><default><default><default>
        ms_clk = port:PH7<5><default><default><default>
        ms_d0 = port:PH8<5><default><default><default>
        ms_d1 = port:PH9<5><default><default><default>
        ms_d2 = port:PH10<5><default><default><default>
        ms_d3 = port:PH11<5><default><default><default>
        ms_det =

        [smc_para]
        smc_used = 0
        smc_rst = port:PH13<5><default><default><default>
        smc_vppen = port:PH14<5><default><default><default>
        smc_vppp = port:PH15<5><default><default><default>
        smc_det = port:PH16<5><default><default><default>
        smc_vccen = port:PH17<5><default><default><default>
        smc_sck = port:PH18<5><default><default><default>
        smc_sda = port:PH19<5><default><default><default>

        [ps2_0_para]
        ps2_used = 0
        ps2_scl = port:PI20<2><1><default><default>
        ps2_sda = port:PI21<2><1><default><default>

        [ps2_1_para]
        ps2_used = 0
        ps2_scl = port:PI14<3><1><default><default>
        ps2_sda = port:PI15<3><1><default><default>

        [can_para]
        can_used = 0
        can_tx = port:PA16<3><default><default><default>
        can_rx = port:PA17<3><default><default><default>

        [keypad_para]
        kp_used = 0
        kp_in_size = 8
        kp_out_size = 8
        kp_in0 = port:PH8<4><1><default><default>
        kp_in1 = port:PH9<4><1><default><default>
        kp_in2 = port:PH10<4><1><default><default>
        kp_in3 = port:PH11<4><1><default><default>
        kp_in4 = port:PH14<4><1><default><default>
        kp_in5 = port:PH15<4><1><default><default>
        kp_in6 = port:PH16<4><1><default><default>
        kp_in7 = port:PH17<4><1><default><default>
        kp_out0 = port:PH18<4><1><default><default>
        kp_out1 = port:PH19<4><1><default><default>
        kp_out2 = port:PH22<4><1><default><default>
        kp_out3 = port:PH23<4><1><default><default>
        kp_out4 = port:PH24<4><1><default><default>
        kp_out5 = port:PH25<4><1><default><default>
        kp_out6 = port:PH26<4><1><default><default>
        kp_out7 = port:PH27<4><1><default><default>

        [usbc0]
        usb_used = 1
        usb_port_type = 2
        usb_detect_type = 1
        usb_id_gpio = port:PH4<0><1><default><default>
        usb_det_vbus_gpio = port:PH5<0><0><default><default>
        usb_drv_vbus_gpio = port:PB9<1><0><default><0>
        usb_host_init_state = 0

        [usbc1]
        usb_used = 0
        usb_port_type = 1
        usb_detect_type = 0
        usb_id_gpio =
        usb_det_vbus_gpio =
        usb_drv_vbus_gpio = port:PH6<1><0><default><0>
        usb_host_init_state = 1

        [usbc2]
        usb_used = 1
        usb_port_type = 1
        usb_detect_type = 0
        usb_id_gpio =
        usb_det_vbus_gpio =
        usb_drv_vbus_gpio = port:PH3<1><0><default><0>
        usb_host_init_state = 0

        [usb_feature]
        vendor_id = 6353
        mass_storage_id = 1
        adb_id = 2
        manufacturer_name = "USB Developer"
        product_name = "Android"
        serial_number = "20080411"

        [msc_feature]
        vendor_name = "USB 2.0"
        product_name = "USB Flash Driver"
        release = 100
        luns = 2

        [gsensor_para]
        gsensor_used = 1
        gsensor_name = "bma250"
        gsensor_twi_addr = 0x18
        gsensor_twi_id = 1
        gsensor_int1 = port:PH0<6><1><default><default>
        gsensor_int2 = port:PI10<6><1><default><default>

        [gps_para]
        gps_used = 0
        gps_spi_id = 2
        gps_spi_cs_num = 0
        gps_lradc = 1
        gps_clk = port:PI0<2><default><default><default>
        gps_sign = port:PI1<2><default><default><default>
        gps_mag = port:PI2<2><default><default><default>
        gps_vcc_en = port:PC22<1><default><default><0>
        gps_osc_en = port:PI14<1><default><default><0>
        gps_rx_en = port:PI15<1><default><default><0>

        [sdio_wifi_para]
        sdio_wifi_used = 0
        sdio_wifi_sdc_id = 3
        sdio_wifi_mod_sel = 1
        swl_n20_shdn = port:PH9<1><default><default><0>
        swl_n20_host_wakeup = port:PH10<1><default><default><1>
        swl_n20_vdd_en = port:PH11<1><default><default><0>
        swl_n20_vcc_en = port:PH12<1><default><default><0>

        [usb_wifi_para]
        usb_wifi_used = 1
        usb_wifi_usbc_num = 2

        [3g_para]
        3g_used = 0
        3g_usbc_num = 2
        3g_uart_num = 0
        3g_pwr =
        3g_wakeup =
        3g_int =

        [gy_para]
        gy_used = 0
        gy_twi_id = 1
        gy_twi_addr = 0x0
        gy_int1 = port:PH18<6><1><default><default>
        gy_int2 = port:PH19<6><1><default><default>

        [ls_para]
        ls_used = 0
        ls_twi_id = 1
        ls_twi_addr = 0x0
        ls_int = port:PH20<6><1><default><default>

        [compass_para]
        compass_used = 0
        compass_twi_id = 1
        compass_twi_addr = 0x0
        compass_int = port:PI13<6><1><default><default>

        [bt_para]
        bt_used = 0
        bt_uart_id = 2
        bt_mod_type = 1

        [i2s_para]
        i2s_used = 0
        i2s_channel = 2
        i2s_mclk = port:PB5<2><1><default><default>
        i2s_bclk = port:PB6<2><1><default><default>
        i2s_lrclk = port:PB7<2><1><default><default>
        i2s_dout0 = port:PB8<2><1><default><default>
        i2s_dout1 =
        i2s_dout2 =
        i2s_dout3 =
        i2s_din = port:PB12<2><1><default><default>

        [spdif_para]
        spdif_used = 0
        spdif_mclk =
        spdif_dout = port:PB13<4><1><default><default>
        spdif_din =

        [audio_para]
        audio_used = 1
        capture_used = 1
        audio_lr_change = 0
        audio_pa_ctrl = port:PH15<1><default><default><0>

        [ir_para]
        ir_used = 0
        ir0_rx = port:PB4<2><default><default><default>

        [pmu_para]
        pmu_used = 1
        pmu_twi_addr = 0x34
        pmu_twi_id = 0
        pmu_irq_id = 0
        pmu_battery_rdc = 100
        pmu_battery_cap = 4500
        pmu_init_chgcur = 600
        pmu_earlysuspend_chgcur = 600
        pmu_suspend_chgcur = 1000
        pmu_resume_chgcur = 300
        pmu_shutdown_chgcur = 1000
        pmu_init_chgvol = 4200
        pmu_init_chgend_rate = 15
        pmu_init_chg_enabled = 1
        pmu_init_adc_freq = 100
        pmu_init_adc_freqc = 100
        pmu_init_chg_pretime = 50
        pmu_init_chg_csttime = 720
        pmu_bat_para1 = 0
        pmu_bat_para2 = 0
        pmu_bat_para3 = 0
        pmu_bat_para4 = 0
        pmu_bat_para5 = 5
        pmu_bat_para6 = 8
        pmu_bat_para7 = 11
        pmu_bat_para8 = 22
        pmu_bat_para9 = 33
        pmu_bat_para10 = 43
        pmu_bat_para11 = 50
        pmu_bat_para12 = 59
        pmu_bat_para13 = 71
        pmu_bat_para14 = 83
        pmu_bat_para15 = 92
        pmu_bat_para16 = 100
        pmu_usbvol_limit = 1
        pmu_usbcur_limit = 0
        pmu_usbvol = 4000
        pmu_usbcur = 0
        pmu_usbvol_pc = 4000
        pmu_usbcur_pc = 0
        pmu_pwroff_vol = 3300
        pmu_pwron_vol = 2900
        pmu_pekoff_time = 9000
        pmu_pekoff_en = 1
        pmu_peklong_time = 1500
        pmu_pekon_time = 1000
        pmu_pwrok_time = 64
        pmu_pwrnoe_time = 2000
        pmu_intotp_en = 1
        pmu_used2 = 0
        pmu_adpdet = port:PH2<0><default><default><default>
        pmu_init_chgcur2 = 400
        pmu_earlysuspend_chgcur2 = 600
        pmu_suspend_chgcur2 = 1200
        pmu_resume_chgcur2 = 400
        pmu_shutdown_chgcur2 = 1200
        pmu_suspendpwroff_vol = 3500
        pmu_batdeten = 1

        [recovery_key]
        key_min = 4
        key_max = 100

        [dvfs_table]
        max_freq = 0x3c14dc00
        min_freq = 0x3938700
        LV_count = 5
        LV1_freq = 0x3ef14800
        LV1_volt = 1500
        LV2_freq = 0x3c14dc00
        LV2_volt = 1400
        LV3_freq = 0x365c0400
        LV3_volt = 1350
        LV4_freq = 0x337f9800
        LV4_volt = 1300
        LV5_freq = 0x25317c00
        LV5_volt = 1250

        Comment

          #5
          Originally posted by seya_20 View Post
          A10 chipset stuck on logo i flash it in other firmware it is sucessfully but the touch screen didn't
          work.. I need a compatible firmware for my tablet pls..

          [IMG][/IMG]

          [IMG][/IMG]

          [IMG][/IMG]

          successfully done .. i flashed my tablet and touchscreen realy work's... but camera error firmware uploading..
          Last edited by seya_20; 11 June 2013, 18:55. Reason: wrong spelling

          Comment

          Previous template Next

          What's Going On

          Collapse

          There are currently 2752 users online. 1 members and 2751 guests.

          Most users ever online was 63,956 at 18:56 on 20 March 2025.

          Working...
          X

          We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

          By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

          I Agree