HPH RK3288 Lollipop ROM v1.6 By Mo123

[mo123]

Looking forward for the new f/w.
I love the Launcher of HPH and especially the new one is a must have.
mo123 you are doing a terrific job!

Just letting know others with Tronsmart devices that the below app is successfully shutting down and reboot to bootloader. Just root the device and install it.
https://play.google.com/store/apps/d...ckreboot&hl=en

Will try to upload it later today.
Should stay at 1080p I think and
fix some auto frame-rate switching &
fix pass-through problem hopefully.

[Cypher]

Changelog v1.8 (02-12-2016)

- Fix the Google Play problem
- Improve video playback
- Latest codecs and video framework
- Updated launcher
- App Market included
- Fixed Netflix audio out of sync(still to test)
- New Xbox Xpad driver, more compatible gamepads should work
- Fix resolution problem after boot

Download Link: Here
Pass: nagrace

Hi, can this be flashed safely on Tronsmart R28 PRO 2G/8GB currently on stock KK?

[gefattern]

Hi Mo ,

i have a Question , what is a SDIO Card , if i use the App SDInsight it shows up my SDCard / emmc and under SDIO Card stands something about Wifi .

(Broadcom bcm4335 Single Chip 5G Wifi 802.11 ac Mac Baseband Radio with Bluetooth 4.0 +HS & FM Radio Receiver) i thought i have a AP6335 in

my UT3.Can i install a Radio App if it has FM Support ???


nice Day


gefattern

[orionas21]

There will also be new firmware in a week or so with the latest code and bugfixes that should work even better.

Looking forward for the new f/w.
I love the Launcher of HPH and especially the new one is a must have.
mo123 you are doing a terrific job!

Just letting know others with Tronsmart devices that the below app is successfully shutting down and reboot to bootloader. Just root the device and install it.
https://play.google.com/store/apps/d...ckreboot&hl=en

[mo123]

mo123.... kindly can you provide the 1080p boot.img to use on 1.8 ? thanks a lot

Will upload it later today.
First have to test it.

Will probably make a new ROM next week maybe that can remember any resolution set, just waiting for a few things.

[gridlock]

mo123.... kindly can you provide the 1080p boot.img to use on 1.8 ? thanks a lot

[mo123]

I have rollback to 1.7b and i do not have the logs.
I will try it again this weekend if i can.

Shomari is right, a Kodi log will tell a lot.

There might be a problem with the firmware also, there are lots of HDMI-IN sound code I didn't remove and in the v1.7b firmware I disabled some but can't remember exactly what, so will try something later.
There will also be new firmware in a week or so with the latest code and bugfixes that should work even better.

[orionas21]

If not too late, would you mind sharing your Kodi debug logs as well as your dmesg log output during your testing? You've done a very thorough series of tests. I'm banned from the Kodi forums so this is the only place I'll get to see logs, if at all.

Mo123 I hope my request is acceptable, if not please let me know.

Thanks!

I have rollback to 1.7b and i do not have the logs.
I will try it again this weekend if i can.

[Shomari]

My receiver is connected to internet and has auto update enabled.
Nevertheless i checked and i have the latest firmware in Yamaha.
I tried everything before reverting back to 1.7b.
I even played with HDMI mode 720,1080,4k and in several refresh rates.
I tried color modes.
I tried with sound default & HDMI bit-stream
In NTMC & RKMC i tried with enabled/disabled refresh rate sync
With never / always the keep audio device.
Enable and disable pass-through on the fly (during playback).
Enable & disable pass-through from settings.
Enable & disable RKcodec, Mediacodec, Mediacodec(surface).

The same in MX with HW decoder in sound. with SW decoder in sound, with HW+ decoder combined with SW decoder for sound.

If not too late, would you mind sharing your Kodi debug logs as well as your dmesg log output during your testing? You've done a very thorough series of tests. I'm banned from the Kodi forums so this is the only place I'll get to see logs, if at all.

Mo123 I hope my request is acceptable, if not please let me know.

Thanks!

[orionas21]

Go into MXPlayer settings and download the external ffmpeg codec, then use it as the default ocdec.
https://www.3nions.com/fix-ac3-audio...-in-mx-player/
If you still don't have correct sound then something is wrong with your setup as MXPlayer runs independently of the rest of the firmware system files.

I already done that... I download it though from xda forum.
The same codec i use in 1.7b and plays correctly.
i noticed that in 1.8 the libffmpeg.so and libmxffmpeg.so are different than 1.7b.
Could this be the problem?
When update i even wipe data before the flashing. just leting you know.

[mo123]

My receiver is connected to internet and has auto update enabled.
Nevertheless i checked and i have the latest firmware in Yamaha.
I tried everything before reverting back to 1.7b.
I even played with HDMI mode 720,1080,4k and in several refresh rates.
I tried color modes.
I tried with sound default & HDMI bit-stream
In NTMC & RKMC i tried with enabled/disabled refresh rate sync
With never / always the keep audio device.
Enable and disable pass-through on the fly (during playback).
Enable & disable pass-through from settings.
Enable & disable RKcodec, Mediacodec, Mediacodec(surface).

The same in MX with HW decoder in sound. with SW decoder in sound, with HW+ decoder combined with SW decoder for sound.

Go into MXPlayer settings and download the external ffmpeg codec, then use it as the default ocdec.

https://www.3nions.com/fix-ac3-audio-format-not-supported-in-mx-player/

If you still don't have correct sound then something is wrong with your setup as MXPlayer runs independently of the rest of the firmware system files.

[orionas21]

Can you check if you have the latest firmware installed for your audio receiver?

http://download.yamaha.com/search/detail/?language=en&site=usa.yamaha.com&asset_id=68453&category_id=16446&product_id=2180334&1481208436

Also Android Settings - Sound - Set to HDMI Bitstream?
In NTMC can also try setting 'keep audio device alive' to never or always.
In NTMC also need to enable relevant AC3/DTS sound settings.

Other users reported pass-through sound working.

My receiver is connected to internet and has auto update enabled.
Nevertheless i checked and i have the latest firmware in Yamaha.
I tried everything before reverting back to 1.7b.
I even played with HDMI mode 720,1080,4k and in several refresh rates.
I tried color modes.
I tried with sound default & HDMI bit-stream
In NTMC & RKMC i tried with enabled/disabled refresh rate sync
With never / always the keep audio device.
Enable and disable pass-through on the fly (during playback).
Enable & disable pass-through from settings.
Enable & disable RKcodec, Mediacodec, Mediacodec(surface).

The same in MX with HW decoder in sound. with SW decoder in sound, with HW+ decoder combined with SW decoder for sound.

[orionas21]

If i flash the new kernel and resources from 1.8 will the problem with Google play resolve in 1.7b?

[mo123]

mo123
In your last rom 1.8 i hear noise in NTMC RKMC (last version) and MXplayer.
The Google play problems corrected.

Can you check if you have the latest firmware installed for your audio receiver?

http://download.yamaha.com/search/detail/?language=en&site=usa.yamaha.com&asset_id=68453&category_id=16446&product_id=2180334&1481208436

Also Android Settings - Sound - Set to HDMI Bitstream?
In NTMC can also try setting 'keep audio device alive' to never or always.
In NTMC also need to enable relevant AC3/DTS sound settings.

Other users reported pass-through sound working.

[orionas21]

mo123
In your last rom 1.8 i hear noise in NTMC RKMC (last version) and MXplayer.
The Google play problems corrected.