Help put work usb wiffi dongle TP-LINK TL-WN725N v1 chipset Realtek RTL8188CUS in mk808b

[skysurf]

Hello Bob. My device is mk808b and my rom is the Finless Bob 2.1 Kernels MK808B 1080, JB 4.2.2. I want it to put work the wiffi dongle TP-LINK TL-WN725N v1 chipset Realtek RTL8188CUS in this rom. I bought this pen because I thought that would be enough to plug it and it would work on mk808b because there are drivers for linux, but well I was wrong.
I've done the download of drivers on the page:

http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true

but do not know how do I compile and install the driver on mk808b.
Can you help me?
Also ever tried to copy a file that i found over the internet: rtl8192cu.ko.
Even i copied it to /system/lib/modules, but doing the command:
insmod /system/lib/modules/rtl8192cu.ko
gives me an error in the execution (exec) ...


I don't know much of the subject so anyone can help me?

Thank you!

[jtbc]

Have you tried ROM 4.1?
Heard that it works with 4.1 but not 4.2.2.

I'm also trying as just bought a USB Wifi doogle. Failed on ROM2.1 which is 4.2.2 and going to flash back to ROM1.7 (4.1) to try it out,
But mine has less chance as my chipset is Realtek 8191su.
8188cu.ko is included in the ROM2.1(confirmed) and 1.7(not sure as hv not flash back yet) (/system/lib/module) if I'm not wrong.

[skysurf]

I like the rom 4.2.2

Have you tried ROM 4.1?
Heard that it works with 4.1 but not 4.2.2.

I'm also trying as just bought a USB Wifi dongle. Failed on ROM2.1 which is 4.2.2 and going to flash back to ROM1.7 (4.1) to try it out,
But mine has less chance as my chipset is Realtek 8191su.
8188cu.ko is included in the ROM2.1(confirmed) and 1.7(not sure as hv not flash back yet) (/system/lib/module) if I'm not wrong.

That is a older Rom 1.7 !

I like this room 4.2.2. I won't work with them... but i will try in the Rom 1.7 (4.1)

So anyone can help me to put work on Rom 4.2.2 ?



Thanks

[jtbc]

I have tried both ROM 1.7 and 2.1 with the built in driver 8188cu.ko but failed.
My USB wifi stick driver is 8191su. Thot just give it a try.
I think I would need a 8191su driver for android to try it out again.
http://www.freaktab.com/showthread.p...vers-petitions

[jtbc]

Try this thread, may be you can find your answer here.

http://www.armtvtech.com/armtvtechforum/viewtopic.php?f=66&t=231&start=20#p1552

I have found a compatible driver(rtl8711) for my USB wifi (rtl8191su) and is going to try it out later.

Update:
Tested with ROM1.7 working fine for my wifi dongle LG-N28.

[humpty_dumpty_empty]

Try this thread, may be you can find your answer here.

http://www.armtvtech.com/armtvtechforum/viewtopic.php?f=66&t=231&start=20#p1552

I have found a compatible driver(rtl8711) for my USB wifi (rtl8191su) and is going to try it out later.

Update:
Tested with ROM1.7 working fine for my wifi dongle LG-N28.

Hi JTBC,

Were you able to connect RTL8188CU to MK808B tv stick? My wifi is not working from the tv stick and am desperately looking for a substitue... Thanks.

[Adainair]

Hi guys you can use with 4.1 firmware USB wifi dongles with 8191su and 8192cu both are tested in my Uhost2 device like MK808B not like i am use MK808B FW in my Uhost2 many times.
For both wifi adapters you can find adequate ko files in this topic.

http://www.armtvtech.com/armtvtechforum/viewtopic.php?f=66&t=231

Copy/paste ko files to system/lib/modules rename adequate ko file to rkwifi.ko owerwrite current or rename and change permission to -rw-r--r-- same permission like other ko files then disable wifi reboot insert USB wifi adapter now enable wifi and say
Good luck