Dead MXiii s812 no power

[mad2016]

Is there any way to bring my MXiii amlogic s812 back to life. While was I was updating (USB) the box with probably wrong firmware the power LED light is gone. It won't turn on. Any help!

[drakulaboy]

yes, you can bring it to life with a correct firmware, or with firmware from sdcard

[mad2016]

Drakulaboy:
Could you please provide the instructions. I tried to flash the correct firmware with USB tools /PC without any luck. As I mentioned there is no power LED light (red or blue) on my devices, so the USB tool wouldn't recognize the device. Any idea?

[tani666]

upload photo of you board.You have uploaded a photo how is to small to see.

[tani666]

Try to connect a type a to type a cable from your android box usb port (one of usb port) to your pc and see if the box will have a red or blue light

[mad2016]

upload photo of you board.You have uploaded a photo how is to small to see.

[mad2016]

upload photo of you board.You have uploaded a photo how is to small to see.

I was trying to upload a clear picture but not sure if it worked. You

[mad2016]

Try to connect a type a to type a cable from your android box usb port (one of usb port) to your pc and see if the box will have a red or blue light

I tried with a old type a USB cable but didn't work. I will try again with a new cable.

[mad2016]

Try to connect a type a to type a cable from your android box usb port (one of usb port) to your pc and see if the box will have a red or blue light

I tried type A USB but didn't work. I don't see any blue or red power lights. Any idea?

[tani666]

Please upload photos of your board on mediafire and post the link here.


1-Post the photo of your box

2-Try another charger for your box.

3-You must try to short the nand chip pins (the right pins).Without the photo of your board i cant tell you what pin you must short.
I hope that your box is not demaged.