Z4 with Ugoos UT4 1.1.4 firmware - problem.

[lord_yabol]

Welcome,

I install firmware from ugoos UT4 device to my Z4 and i have a problem with power button.
I have to always press and hold to working, if not device is going off.
Temporary i found solution : i connect otg cable to any usb port (in another device)and then Z4 works perfectly (HD Audio etc...).

Do you have some solution for power button or can you make some patch?

[mo123]

Welcome,

I install firmware from ugoos UT4 device to my Z4 and i have a problem with power button.
I have to always press and hold to working, if not device is going off.
Temporary i found solution : i connect otg cable to any usb port (in another device)and then Z4 works perfectly (HD Audio etc...).

Do you have some solution for power button or can you make some patch?

Use firmware that was made for Z4 otherwise lots of things like USB ports, power buttons or IR remotes won't work as it was made for a different device.
You can even damage your device as Ugoos overclocks their firmware and have bigger heatsinks that other devices don't have, so just be aware of that when flashing different firmware.
Maybe someone will make a patch, don't know.

[lord_yabol]

Everything is working very nice. Bluetooth, Wifi 5GHz ac with ~140Mb/sec in speedtest. Usb is ok and micrsd card 64GB. Temperature is ok (Hardware monitor). The hardware of UT-4 is the same like in Z4.
In Ugoos Kodi DTS-HDMaster and Dolby True HD works perfectly.
Only Power Button is a issue.

[lord_yabol]

I found solution on this forum:

Guide update
Z4_UGOOS_MOD_V1.5 to UGOO UT4 v.1.1.3

http://freaktab.com/forum/tv-player-support/rk3688-devices-aa/ugoos-rk3368/firmware-roms-tools-ag/552738-official-ugoos-firmwares-for-devices-based-on-rk3368

1. If it's the first time, you need to install drivers or manuals DriverAssitant connected devices
2. Run AndroidTool.exe
3. Switch "function advandced" tab, select the image "ut4_1.1.3.img" Press "Unpack"
4.Copy UT4_1.1.3\AndroidTool\Output\Android\Image\system. img copies to UT4_1.1.3\AndroidTool\Image
5. switch to "Download image" tab unsect all tabs except the "system"
6. Connecting to the computer through the USB OTG port equipment (full guide you can find printed by connecting "ugoos_firmware_upgrade_guide")
7. Click on the "RUN"
8. Once the update is complete restart to mode TWRP recovey select wipe
sorry for my bad english (I use google translate)

Everything works good now

Thank you hoangnm.

[waltzie]

Hi,
I've try hoangnm method but WiFi does not work!

W8ing for theZ4_UGOOS_MOD_V1.6 to UGOO UT4 1.1.4 octacore

Thanks

[Gromber]

people you can install external apk without problem?

[Roland Deschan]

Yup

[cOOLio]

A Z4 RK3368 custom rom version based on the UGOOS UT4 V1.1.4 TV firmware is now available.

http://freaktab.com/forum/tv-player-support/rk3688-devices-aa/ekb368/firmware-roms-tools-bc/636196-rom-z4-android-tv-mod-v1-0-ugoos-ut4

[marceltunholi]

people you can install external apk without problem?

I can't install apk too...says: "insufficient storage space". Only happens with ugoos 1.1.4 how can i fix that?

[marceltunholi]

I can't install apk too...says: "insufficient storage space". Only happens with ugoos 1.1.4 how can i fix that?

someone help?