Mini MXIII S905 broken

[crik91]

Hi, my device stopped working today after flash stock firmware from SUPERCELERON ROM, tried to flash the firmware with no luck, I can't turn on the device. Only recovery working.

This is what happen in recovery:
Finding update package...
Opening update package...

-- Secure Check...
Secure check complete.

Verifying update package...
Installing update...
Can`t install this package
E:Error in /sdcard/p200_2G-ota-20160425.zip
(Status 1)

Installation aborted.
OTA failed! Please power off the device to keep it in this state and file a bug report!
Formatting /data...
Formatting /cache...
Data wipe failed.

Recovery is listening adb sideload...
Waiting adb sideload command...
E:Cannot load volume /misc!


What may I do?


Thank you

[mwnn]

You'll have to try recovering the box using the Amlogic Burning Tool.

Connect the Beelink box to a Windows PC with a USB Male to Male cable. (those can be had for a £1 or less)
https://images-na.ssl-images-amazon....L._SL1063_.jpg

Download and install the burning tool:

https://mega.nz/#F!o1Ux0LiK!dpw-7GUG7_DuptBT2r7ukg

And the full stock image for the MiniMX III:

https://mega.nz/#F!M9FxDJZY!Qyf61LTqgARUUaW9k2bB7A

MINI MXIII_107L1_0425.img (~710MB)

Start the tool
Set the language to English (as in my attached picture)

Connect the box to the PC with the USB cable whilst holding the recovery switch down (underside of the box - a bit tricky to do!)
The box should power up and show up in the tool (you can release the switch then)
File > Import the firmware IMG file
Don't alter any of the options from the defaults
Click Start
Don't interrupt the flashing process!
Once finished click STOP
Disconnect the box

Connect the box to a TV/Monitor as you would normally and pray that it's worked.

Watch this video so you're clear on the steps to take:

https://www.youtube.com/watch?v=m8chkgcfcwQ

[KAA]

You'll have to try recovering the box using the Amlogic Burning Tool.

Connect the Beelink box to a Windows PC with a USB Male to Male cable. (those can be had for a £1 or less)
https://images-na.ssl-images-amazon....L._SL1063_.jpg

Download and install the burning tool:

https://mega.nz/#F!o1Ux0LiK!dpw-7GUG7_DuptBT2r7ukg

And the full stock image for the MiniMX III:

https://mega.nz/#F!M9FxDJZY!Qyf61LTqgARUUaW9k2bB7A

MINI MXIII_107L1_0425.img (~710MB)

Start the tool
Set the language to English (as in my attached picture)

Connect the box to the PC with the USB cable whilst holding the recovery switch down (underside of the box - a bit tricky to do!)
The box should power up and show up in the tool (you can release the switch then)
File > Import the firmware IMG file
Don't alter any of the options from the defaults
Click Start
Don't interrupt the flashing process!
Once finished click STOP
Disconnect the box

Connect the box to a TV/Monitor as you would normally and pray that it's worked.

Watch this video so you're clear on the steps to take:
https://www.youtube.com/watch?v=m8chkgcfcwQ

try using sd card method to flash firmware now my box cannot power in..after press reset button plug in power supply but no repond