How to nand short/reset S905X with EMMC (Nexbox A95X)?

[Methanoid]

the pins are at the bottom of the pcb, slightly askew form the nand chip above it.
can't really miss it. usually is the last 2 pins on the marked row (little arrow to indicate 1).
so short the last last 2 pins on the marked row, i think 16/17 and turn the box on
usb burner should detect it

don't press too hard cuz the solder is not that good on the ones i tried this on
sometimes you end up permanently shorting them
if that happens just use a plastic card or your nail to clean in between the shorted pins and should be fine again

THANK YOU worked perfectly for me

[Vadimsoft]

this is my board
photo taken from google images

6-7 ?????????? ?? ????? ????????

[nishantdawadi]

i flashed a zip to reboot to recovery an i got into bootloop, can any one point out the nand short pins for my board?
BOX: Cloudnetgo 4gltebox cm05g
BOARD: P212 S905x 1 G 16 G
Images are below:

https://ibb.co/9tmqnyN

https://ibb.co/Mkz7SMT

https://ibb.co/ZX5mLNQ

[Mozzart1]

what two pin to short on nexbox A95x 1/8G Can someone help plz. Enybody knows?