MK808B (original) help after installed latest Finless 2.1 ROM

[daytona955]

I have one small problem and one a bit bigger

The small - I can confirm that HP docking station works fantastically as a network USB hub. Too well in fact, it even detects the audio and reroutes!
It does allow me every reboot to alter, would be nice if I could set it and forget it (worked for network, just not audio)

The bigger issue. The flash was a bit of a pain but eventually managed to do it and used the stock 1Gb setting and all seemed ok.

But I noticed that NAND flash was missing later when I tried to download?
I seemed to resolve this once, managing to format but can't recall where (can't find it again in settings?)

Have I missed something from the flash or can someone tell me where to find this ?

I tried storage and that won't allow me to mount nand flash. I tried storage format also in the "basic"/OEM settings too. Can't remember where I did it although its no good as it doesn't remain permanently resolved/mounted clearly anyway.

Any help grateful received

Ant
Its annoying having all the space and it going missing !

[leolas]

Re: MK808B (original) help after installed latest Finless 2.1 ROM

I have one small problem and one a bit bigger

The small - I can confirm that HP docking station works fantastically as a network USB hub. Too well in fact, it even detects the audio and reroutes!
It does allow me every reboot to alter, would be nice if I could set it and forget it (worked for network, just not audio)

The bigger issue. The flash was a bit of a pain but eventually managed to do it and used the stock 1Gb setting and all seemed ok.

But I noticed that NAND flash was missing later when I tried to download?
I seemed to resolve this once, managing to format but can't recall where (can't find it again in settings?)

Have I missed something from the flash or can someone tell me where to find this ?

I tried storage and that won't allow me to mount nand flash. I tried storage format also in the "basic"/OEM settings too. Can't remember where I did it although its no good as it doesn't remain permanently resolved/mounted clearly anyway.

Any help grateful received

Ant
Its annoying having all the space and it going missing !

I suggest you flash it again, but don't disconect the otg port just after flash ends, wait at least 5 minutes since the flash ends to disconnect the otg usb wire.
Just after the flash process ends, the stick autoreboots itself and enter in recovery mode to format data,cache and internal sdcard partitions. If you disconnect the usb while this procces is running the format action is interrupted and result in a corrupted internal storage. Some times after reboot system can repair the internal storage some times no

leolas

[daytona955]

Cheers man, I will try it out...wish I hadn't spent to much time setting it up with apps lol

Update - cheers it works !

I had a back of the brain hunch it would come down to reflash again was necessary but really hoped not, but at least its good feedback that confirms it must be what went wrong in my cases

[leolas]

Re: MK808B (original) help after installed latest Finless 2.1 ROM

Cheers man, I will try it out...wish I hadn't spent to much time setting it up with apps lol

A backup with titanium or any app will save you a lot of time reinstalling all aps.

leolas

[daytona955]

Well it was working.....briefly, well after I had disconnected then connected it into
The NAND flash has unmounted again ???

Why has it forgotten ?
It also lost XMBC changes I made but suspect this is related to the source problem with NAND

I am flashing again but this time all default, all ticked EXCEPT I am using 2Gb this time.
Going to check after soft and hard reboots

Just checked it happened straight after the "reboot" option, not sure if this has anything to do with SuperSU but certainly requires the SU rights to do it (prompted)

[leolas]

Re: MK808B (original) help after installed latest Finless 2.1 ROM

Well it was working.....briefly, well after I had disconnected then connected it into
The NAND flash has unmounted again ???

Why has it forgotten ?
It also lost XMBC changes I made but suspect this is related to the source problem with NAND

I am flashing again but this time all default, all ticked EXCEPT I am using 2Gb this time.
Going to check after soft and hard reboots

Xbcm changes are losen when you format the internal sdcard.

leolas

[daytona955]

I'm banging my head on a brick wall trying to work out what is going on

The only thing I have found is running Mounts2HD it found 2 problems

one was with init.d and was fixed
one that is not is busybox is not properly configured and will not work. This app doesn't manage to correct though

I've tried uninstall no apps but still same, so Im going to try the latest stock 4.2 and see what happens from there