Stock Firmware for the Acemax M12N aka Bqeel T12 aka MXQ Plus

[Sandbox]

Hello, i search the original stock firware for the Acemax M12N aka Bqeel T12 aka MXQ Plus

I need definitly a Zip file to restore the system.

[electron45]

This firmware is excellent

[Sandbox]

Everything good and nice but I need a ZIP file because the box has no USB port for PC.

Convince yourself

Edit: Okey, i watched some YT videos and saw that i need a USB A to A Cable.
I want to do one thing myself. Should i connect the D+ to D+ or connect D+ to D-?

Edit2: Okay, its D+ to D+
Now the USB Burning Tool dont connect to the Box. Iam in the Recovery Mode, but what should I take?

[Sandbox]

Sorry for double post

[electron45]

This zip rom for recover the device

[Sandbox]

This zip rom for recover the device

This is a moded Custom Rom. OTA does not work with this one.
I need Original Stock Rom.

[bluesmanuk]

Everything good and nice but I need a ZIP file because the box has no USB port for PC.

Convince yourself

Edit: Okey, i watched some YT videos and saw that i need a USB A to A Cable.
I want to do one thing myself. Should i connect the D+ to D+ or connect D+ to D-?

Edit2: Okay, its D+ to D+
Now the USB Burning Tool dont connect to the Box. Iam in the Recovery Mode, but what should I take?

The box will not be recognised by the burning tool when in recovery.

This is the correct procedure:

• Install the USB burning tool and allow the associated driver to be installed (you may wish to reboot afterwards although I have not found it necessary).
• Fire up the burning tool, where you will initially find the interface in Chinese. Simply select the second menu item and select English from the resulting drop down menu.
• Select file, Import Image. Locate the firmware in the located that you downloaded it to and wait for the burning tool to check the validity of the image.
• There are two potential options that you may wish to consider at this point. If your box is connected to your TV/monitor and you want to flash the firmware and have the box automatically reset and start the process of loading up, then tick the reset after success box. If not then leave the defaults as they are.
• Click the start button. This will prepare the burning tool to flash as soon as the right connection is made between PC and box.
• Insert your USB cable into a port on your PC.
• If plugged in to the box, remove the ac adapter from it.
• Using your screwdriver. Toothpick, insert it into the av port located on the back of the box until you hear and feel the reset button being pressed in. KEEP IT PRESSED IN.
• Insert the other end of the USB cable into the USB port nearest to the AC port.
• Plug in the AC to the box and wait about 5 seconds before releasing the reset button.
• The burning tool interface will show a blue progress bar as the firmware is being flashed to the box.
• Once the firmware is flashed, if you have selected the option to reset after success then the box will reboot and start the process of loading. It will take 5 or 5 minutes before you see the main interface.
• If you have selected the defaults then unplug the USB cable, AC lead and plug the AC lead back in at your leisure to load the new firmware.
• You can then close the burning tool.
• If you see no progress bar then it is likely that you will have inadvertently released the reset switch whilst trying to plug in the other 2 cables (as I have done on a few occasions), so start the physical side of the process again.

[electron45]

More information about installing firmware in S912 (web page to translate)

[Sandbox]

Thank you guys! My MXQ Plus is back now on Stock Firmware.

I made a mistake at this points:

[*]If plugged in to the box, remove the ac adapter from it.[*]Using your screwdriver. Toothpick, insert it into the av port located on the back of the box until you hear and feel the reset button being pressed in. KEEP IT PRESSED IN.[*]Insert the other end of the USB cable into the USB port nearest to the AC port.[*]Plug in the AC to the box and wait about 5 seconds before releasing the reset button.[/LIST]

Then the USB Burning Tools with the right license found the Box and the IMG file was flashed.

Thanks for your help