Sunvell T95Z plus firmware

[rudeboy2012]

Hi to all first time posting
I need some help with updating the T95z plus firmware can anyone help me out my chip is AP6330
thanks.

[l33tlinuxh4x0r]

Hi to all first time posting
I need some help with updating the T95z plus firmware can anyone help me out my chip is AP6330
thanks.

1. Ensure the android box is powered down and not plugged into anything (i.e. hdmi, no sd card in slot, no power cable, etc.)
2. USB cable plugged into PC
3. Start USB Burn tool and load image that you are going to burn. Make sure image is "verified" by the tool.
4. Insert USB cable while holding down the reset button
5. Watch USB burn tool or listen for windows sound tone. You will see USB burn tool show connected.
6. Press Start on USB Burn Tool and start flashing.
7. Once USB burn tool has completed successful burn, stop tool and unplug usb from box.
8. Should be good to go.

[rudeboy2012]

so I nedd usb to usb cable to do this ?
I didn't understand line #3 and where do I get usb burn tool
is there any videos on doing this step by step ?

[l33tlinuxh4x0r]

so I nedd usb to usb cable to do this ?
I didn't understand line #3 and where do I get usb burn tool
is there any videos on doing this step by step ?

yes you need a USB A male to USB A male cable. Also usb burning tool is easy to find on the forums or google it, and lastly I don't know of any videos for this specific box but you could look on youtube.

[rudeboy2012]

ok thanks I'll have to go buy a cable I'll get back to you if needed

[rudeboy2012]

What is the image and where do I get it

[rudeboy2012]

my box is on T5ZP0004
do I need T95ZP0007?
can someone send a link for me please
and is the image is the firmware ?

[l33tlinuxh4x0r]

my box is on T5ZP0004
do I need T95ZP0007?
can someone send a link for me please
and is the image is the firmware ?

If you are already on T5ZP0004 then you should just do an OTA update and you will have T9ZP0007. There is no newer image for these boxes. T5ZP0004 can be found on the forums.

[rudeboy2012]

is this the link for T9ZP0007 ?


https://mega.nz/#!BdIxEThK!x1xy8iwPh...-nmajK7tF6_1oQ

[l33tlinuxh4x0r]

is this the link for T9ZP0007 ?


https://mega.nz/#!BdIxEThK!x1xy8iwPh...-nmajK7tF6_1oQ

I have no idea but it looks like an OTA update not a update image. Where did you find that link?

[rudeboy2012]

On here some guy put it up
do u mind sending me a link please and do I still use the USB burn or do this ?

[l33tlinuxh4x0r]

On here some guy put it up
do u mind sending me a link please and do I still use the USB burn or do this ?

Just do an ota update. It will download and install the T9ZP0007 firmware. USB burning tool is for installing full firmware images. Without a full image you might as well just do an OTA. go to firmware upgrade on your box and let it download and install it for you.

Also read the forums. Use the search function. All of your questions so far have been answered before.

[rudeboy2012]

hey I try that there is 576.19 mb to download after it download keep saying system update isn't responding so I keep pressing wait

[l33tlinuxh4x0r]

hey I try that there is 576.19 mb to download after it download keep saying system update isn't responding so I keep pressing wait

Just keep pressing wait. Eventually it will reboot into recovery and flash the new firmware.

[manvel]

I have T95Z Plus with 3/32 GB and Wifi LTM8830/qca9377. Is there any Rom firmware with really working Bluetooth , I am using v.64 and Bluetooth works with any audio device with periodical loosing connection and then reconnection again, something like one time per 5-10 minutes. Originally I had v.63 firmware but I lost it during flashing with v.64. Is there any solution for this?