[ROM] Beelink GT1 Ultimate SCV1 ("Normal" Android) (DDR4)

[RISCy Dude]

Well... i know what i promise ( i wont do it again ), the problem is a i have lots of roms to maintain + more new boxes coming + work ( that now takes must of my time ) + family ( that is sacred ) ... i have 3 / 5h a week available for the roms...

In my opinion, no explanation is necessary because, a.)You work for free, b.) The amount of devices you offer custom ROMs for is dizzying, c.) We're not married, and d.) See a.).

[ClarkKent]

Well... i know what i promise ( i wont do it again ), the problem is a i have lots of roms to maintain + more new boxes coming + work ( that now takes must of my time ) + family ( that is sacred ) ... i have 3 / 5h a week available for the roms...[/QUOTE]

FAMILY before Roms?
...Makes perfect sense to me.
I will run a SC build yet, need mo' boxes first.
Thanks for your collaborative work....
It HAS BENEFITED us all!

[superceleron]

I would like to ask if you can make a custom rom 7.1.2 for beelink gt1 ultimate. as you have done for beelink gt1, you promised it, but nothing was done. many people are excited to give this rom, thank you very much.

Well... i know what i promise ( i wont do it again ), the problem is a i have lots of roms to maintain + more new boxes coming + work ( that now takes must of my time ) + family ( that is sacred ) ... i have 3 / 5h a week available for the roms...

[boymanos]

I would like to ask if you can make a custom rom 7.1.2 for beelink gt1 ultimate. as you have done for beelink gt1, you promised it, but nothing was done. many people are excited to give this rom, thank you very much.

[superceleron]

Great rom, only problem is wifi disconnect randomly, mostly when device is asleep. Any fix for this problem?

yes but i have stop the support for this rom, that it will be fixed in a totally new rom in a near future

[snakeb]

Great rom, only problem is wifi disconnect randomly, mostly when device is asleep. Any fix for this problem?

[Alexdems]

superceleron your ROM is working properly, thanks for the work you do.
I had problems booting with a USB HDD. I removed it and it started. if it can help you improve it.
And a question:
how to replace / add app on the homescreen (Netflix slots, youtube) I only found how to delete .
thanks.

Beelink GT1 Ultimate AX12

Edit : I found

[leotzian]

The reason I unchecked it is because of superceleron's instructions:
"Install instructions:

• On Usb Burning Tool disable "Erase Bootloader" before flashing..."

You suggest to check it? Ok, I'll try.

If you read the whole thread you will get all your answers. The superceleron instructions are in case you try to flash a model that it is NOT a GT1 ULTIMATE DDR4.At least 4 members of the forum are indicating the the erase bootloader MUST be checked to flash successful.

Sent from my U65GT using Tapatalk

[Opontios]

If you don't check erase bootloader during flashing you will get an error. 100% checked this I tell you. I can speak only for GT1 ULTIMATE 3/32 DDR4

Sent from my U65GT using Tapatalk

The reason I unchecked it is because of superceleron's instructions:
"Install instructions:

• On Usb Burning Tool disable "Erase Bootloader" before flashing..."

You suggest to check it? Ok, I'll try.

[leotzian]

Yes. Currently I'm on 707NO. But I have an issue with my box. After flashing any ROM of Android 7, every 3-rd or 4-th boot the screen starts to blink from normal to black screen, and then to pink and green. I don't no if it is a software issue or hardware. In the beginning, when I was on Android 6, the firmware with wich I received the box, there was no such a problem. Then I tried every ROM that exist in this board, except for yours, because it couldn't flash.

If you don't check erase bootloader during flashing you will get an error. 100% checked this I tell you. I can speak only for GT1 ULTIMATE 3/32 DDR4

Sent from my U65GT using Tapatalk

[Opontios]

Yes. Currently I'm on 707NO. But I have an issue with my box. After flashing any ROM of Android 7, every 3-rd or 4-th boot the screen starts to blink from normal to black screen, and then to pink and green. I don't no if it is a software issue or hardware. In the beginning, when I was on Android 6, the firmware with wich I received the box, there was no such a problem. Then I tried every ROM that exist in this board, except for yours, because it couldn't flash.

[superceleron]

@superceleron

Hi! Could you explain me, how to flash this ROM on my GT1 Ultimate? I'm trying with USB Burning Tool, as you say, but getting this message: (look at the attachment)
Can you please help me?

Is your box in android 7?

[Opontios]

@superceleron

Hi! Could you explain me, how to flash this ROM on my GT1 Ultimate? I'm trying with USB Burning Tool, as you say, but getting this message: (look at the attachment)
Can you please help me?

[Jancales]

Well you can try a ddr3 rom but is not going to work ok...
Erase Bootloader is only for you if the flash goes wrong you can always flash again the stock rom so yes you press the reset button to put the box again in "write" mode so you can flash again the stock rom.
If you erase it and flash one that is not working with that box the only way you have to go back is put the emmc in mask mode..

Found it out the hard way already.

I flashed a Tanix T9Pro rom in the hope it would work, as it also has that LCD display, and however the flash was successful the box didn't boot up.

Usb burning tool also didn't recognize my device any more, however I had flashed the rom without erasing bootloader.

The only way to get it going again was by opening the box and short 2 pins on the memory chip.

I flashed your Gt1 Ultimate scv1 to another Vorke Z6 and it works perfectly right out of the box, it has also runs cooler and solved my problem with the distorted picture I have with the stock rom, but unfortunately the LCD display doesn't work.

I have sent you a PM in that regard

[superceleron]

Thanks for the response.

The Vorke is DDR4 and I'm aware this firmware is as well, but my question was because I'm experimenting with this device and I'm not sure if flashing a DDR3 firmware will brick the device.

If I erase bootloader, does that mean I can not flash a stock rom any more, or with bootloader not erased I can simply press factory reset to return to stock?

Well you can try a ddr3 rom but is not going to work ok...
Erase Bootloader is only for you if the flash goes wrong you can always flash again the stock rom so yes you press the reset button to put the box again in "write" mode so you can flash again the stock rom.
If you erase it and flash one that is not working with that box the only way you have to go back is put the emmc in mask mode..