Beelink SEA I Firmware Update -- SEAI_102M0

[Beelink]

Hello,
The latest version of the firmware:
Current version: SEAI_102M0_32G_20170322
Based on version: SEAI_101M0_32G_20170225
Model: Beelink SEA I
Applicable plate type: RTD1295DD DDR4 2G+eMMC 32G RTL8821AU (wifi + bt)
Please check the configuration version you purchased:

USB upgrade package: SEAI_102M0_32G_20170322
download link: https://beelink-my.sharepoint.com/pe...6UPIwttZ2y1CJM

-------------------------------------------------------------------------------------------------------------------------------------------
Current version: SEAI_102M0_16G_20170321
Based on version: SEAI_101M0_16G_20170225
Model: Beelink SEA I
Applicable plate type: RTD1295DD DDR4 2G+eMMC 16G RTL8821AU (wifi + bt)

USB upgrade package: SEAI_102M0_16G_20170321
download link:

https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?folderid=0b9ce9f338e2d41119cbab9321f999907&authkey=AcXCGsOLktX2VPhgM8ladXs

--------------------------------------------------------------------------------------------------------------------
Beelink SEA I Firmware Update Tool Download:
1. Update the firmware and HDCP key tools2. Only update the firmware tool ,No need to import HDCP key
Link: https://beelink-my.sharepoint.co ... SxU0Mapext3wqzIjURo

About "DHCP KEY" problem：Please refer to http://www.bee-link.com/Beelink-1685-1-1.html

Update：
1. Increase the DLNA function, the default open (wifi effective)
2. Root privileges open
3. HDMI IN in PIP mode, the mouse click into the effective
4. HDMI IN Audio Recording Optimization
5. Digital control support 12/24 hour system
6. The memory display is adjusted to 1.7G
7. HDMI IN path selection to increase the prompt message
8. Restore the factory settings, repair card LOGO problem
9. OTA feature upgrades to improve
10.External input device, enabled by default soft keyboard

Firmware update tutorial:
1、Install the software(setup.exe)
2、Open the software(Launch rtumdfsample.exe)
3、Click 'open' to import firmware
4、Insert USB cable to 'USB 3.0' port on board
5、Power on
6、Waiting for burning to 100%SEA I firmware update step，DHCP key update.pdf

[KAA]

we need HDCP key....

[KingNothing]

I wrote on email and on Skype for HDCP problem.
No answer on none of them until now.
Let's wait...

[vadergr]

Any news?

[trebor]

Check your emails....
looks like they have sent file 2k .bin attachment
Burns ok here on 16gb unit using 102 as the test
I Loaded rom and loaded .bin gets to 99% bit of a think small window 3 times done.
Looking ok so far

[blinkone]

Yep got my Key too for a 16GB device..I think they have been working overtime as it was about 9pm in china when I got my email.

Its a one shot key & don't look like it can be used again,If you do try to use it again you get this message (HAS BEEN UNABLE TO USE! PLEASE REPLACE THE NEXT SET OF SECURITY KEYS!)So lets hope we don't need the key each time we flash new firmware.

The 102FW seems to be fully rooted too

Just need Beelink to add the bottom status bar now and we will be heading in the right direction

[trebor]

Yep looking good

[scooter2014]

Well get the new keys damnit.

[KingNothing]

I didn't receive any key.
Beelink, please you can check it ?

[KingNothing]

I am still waiting the key.
No answer from beelink on forum, email or Skype.
Is it possible to have at least an official answer from beelink support ?
I need the bin key file to update my box...

Inviato dal mio Redmi Note 3 utilizzando Tapatalk

[trebor]

Keep at them and dont give up....

[JOJOJOJO]

The link above is down for some reason, I just got my Beelink SEA I and I'm without kodi trying to do an update please let me know what is my next step, here.