A5X Plus Mini

[gefattern]

Hi again ,

maybe ??????????????????? , Pin 2 and 3 from above the two where the lines come out .

gefattern

[gefattern]

if you mean this pins, no reaction.
in other side, below chip I found more pins. maybe this?

Hi swanuk ,

yes i mean the Pins in Picture No.2 , did you try it ??? the second and the third from top ,

the two you marked at Picture No.2 , good luck / gefattern

[gefattern]

Hi swanuk ,

this looks for me like the Datasheet of the CPU , is this correct ???

There you can do nothing to restore , u can try to shortPins on the

Nand self , the very small solder Points , i read somewhere that

another User was able to restore it like that .

I am not a Pro or Dev. , good luck / gefattern

[gefattern]

Once again ,

i mean the ( pro side 4 ) very small Points direct beside the Nand .

good luck / gefattern

[gefattern]

Hi swanuk ,

please what Firmware do you want to flash ???

gefattern

[gefattern]

Hi again ,

please try the two FWs from Post 2 linked by anthony96 .

good luck / gefattern

[gefattern]

Once more ,

what Bootloaders where used by the two FWs you already tried ???

gefattern

[gefattern]

Hi again ,

first load the Flashtool with FW on Pc , then hold Pins , connect USB , connect Power (if needed) ,

if Tool shows "LoaderMode" leave Pins and press Upgrade .

U can try it with Batchtool too , but test Restore . good luck / gefattern

Ps : Please try the linked FW from Post No.2 too (they work) says ....

[gefattern]

Hi swanuk ,

this looks not nice , i am not a Pro , only a User with a little bit Knowledge about

RK , maybe others know more and can help , maybe you bricked it self by shorten

wrong Pins , but i dont think this is & can happen . I come back later , investigating .

good luck / gefattern

[gefattern]

Hi once more ,

you still not posted the Bootloaderversions of the two Stockroms you tested , please

post , maybe you have same Prob. as other User only Bootloader 2.32 works on his

PCB and on others both , or , only 2.31 .

gefattern

[gefattern]

Hello. I finally got a live my tv box.but after finish restore firmware with pedoo fw i have first logo "Pendoo" 3 sec. and after only green screen on my tv. but led on tv box all time is red....

Hi swanuk ,

did you replug the HDMI Cable ???

gefattern

[gefattern]

Hi swanuk ,

somtimes , try , otherwise you dont know , unplug / replug while green screen .

What about the MX9Pro mini FW , ever tried ???

gefattern

[gefattern]

Hi again ,

please try the other Fw , maybe it runs better , without Screen Problems ???

i press Thumbs , good luck / gefattern

[gefattern]

Hi swanuk ,

what Tv do you have ???

greetings / gefattern

[gefattern]

TCL

Hi swanuk ,

please look here :

http://chinagadgetsreviews.com/download-android-nougat-7-1-1-stock-firmware-z28-tv-box.html

there are different Versions 1/8 & 2/16 , same WifiChip SV6051P .

good luck / gefattern