GT1 703 NO firmware standrad / ultimate edition (2G+16G/2G+32G/3G+32G) AP6255

[Djuganight]

My box is a paper weight due to the wrong "official" firmware that was released here and nothing has been done.
I'm not very happy

[DaMeZ]

My reset button is faulty everytime I update I have to open the box and press the reset button....Â*

[deksta]

is it possible to upgrade 6.0 to 7.1 with burn card make?

[Djuganight]

BEWARE because if you install an "official" firmware update you may endup with a paper weight as I did, since they have uploaded the wrong files to the server.
But even worst is that they assume their mistake but I was the one with a dead tv box without any compensation!

[Lapoler]

BEWARE because if you install an "official" firmware update you may endup with a paper weight as I did, since they have uploaded the wrong files to the server.
But even worst is that they assume their mistake but I was the one with a dead tv box without any compensation!

What you could try is burn an Android 6 image on an SD card using amlogic Boot card maker, insert it, boot your device while holding the reset button, wait a while then try to flash the Android 7 image using your USB cable. It might restore your bootloader.

If this does not work, you can still recover your box using the short pin technique, it is described in the forum. Good luck.

[rathodkunal]

I have a Beelink GT1 S912 16G and Haven't updated till now. Build version is GT1_110M0 Version 6.0.1 can someone help me with on how to update and where to download

1) Standard Edition

2) S912

3) S/N: S913BKLG90254 16G

[yehero]

I have a Beelink GT1 S912 32G .and it's dead like a brick,I need firewall to make it alive.please help
1) ultimate edition

2) S912

3) S/N: A706DSCG20463 32G

[tillaz87]

I have a Beelink GT1 S912 32G .and it's dead like a brick,I need firewall to make it alive.please help
1) ultimate edition

2) S912

3) S/N: A706DSCG20463 32G

This firewall should be good mate Fourm & Dowload Link

[yehero]

Thank you my Beelink GT1 S912 32G,has saved

[flr30000]

First of all I would like to say that I have difficulty with English. I'm brazilian.

I have the GT1

Since I bought her this original.
I'll never change anything.
Her serial number is G912 ... and looking at the settings says it's:
version: 6.0.1 and
version number is GT1_113MO.

Whatt Can I install for ?
What should I install? What is the last update or modification for this model? Do I have to do something before? I need a lot of help

[flr30000]

NOBODY CAN HELP ME?