Tanix TX92 Amlogic S912 CPU Android 7.1 OS 2.4G / 5G WiFi 1000M LAN BT4.1

[jerico123]

You can't use thermal paste, need to use thermal adhesive.

I buy HC-910 from the bay at $1 for a 10 gram tube and it works very well.

Make sure you spread as thin as possible because silicone adhesive has not the same thermal conductive rating as paste , I just use my finger to spread it, and it sticks in about 10 minutes

Thanks mate for reply .. Will this item works ??

https://m.aliexpress.com/item/32506142564.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32506142564

[Jancales]

Thanks for reply

You can't use thermal paste, need to use thermal adhesive.

I buy HC-910 from the bay at $1 for a 10 gram tube and it works very well.

Make sure you spread as thin as possible because silicone adhesive has not the same thermal conductive rating as paste , I just use my finger to spread it, and it sticks in about 10 minutes

[jerico123]

Anything just make sure not metal based .. some of the boards only have two way tape between aluminum heatsink ...

Thanks for reply

[terwood]

Anything just make sure not metal based .. some of the boards only have two way tape between aluminum heatsink ...

[jerico123]

Change the thermal paste ... vorke( z6 )and tanix tx92 same motherboard just different casing and brand...slowly twist heat sink left to right until loose enough to pull off then use a cutip with rubbing alcohol to clean old thermal off chip/heat sink .Then wipe with dry cloth. Reapply new thermal spread across chips. Press down heatsink for 2mins then close casing and power it up.

can you recommend a good thermal paste ? thanks in advance

[RASTAVIPER]

Switch to off.. it changes aspect ratio to video file aspect...

I haven't noticed anything bad with videos.
What is the benefit of I switch it off?

Sent from my ONEPLUS A3003 using Tapatalk

[terwood]

Switch to off.. it changes aspect ratio to video file aspect...

[RASTAVIPER]

Found in settings, Playback something about Auto Framerate:

- On, level 2

- On, level 1

- Off

By default the level 1 is activated.
What does this mean?

Sent from my ONEPLUS A3003 using Tapatalk

[terwood]

Change the thermal paste ... vorke( z6 )and tanix tx92 same motherboard just different casing and brand...slowly twist heat sink left to right until loose enough to pull off then use a cutip with rubbing alcohol to clean old thermal off chip/heat sink .Then wipe with dry cloth. Reapply new thermal spread across chips. Press down heatsink for 2mins then close casing and power it up.

[songduymedia]

Everything works exactly the same as on the original Tanix firmware. The only difference I noticed is the "Vorke" title on home screen =)

But currently my Tanix on this firmware http://freaktab.com/forum/tv-player-...android-tv-7-1
You can also try if there is a desire.

I have TX92 ram 2gb, can I install this rom and how?

[RASTAVIPER]

So everything looks good so far with latest update.
Youtube plays at 1080p, Kodi 17.6 was installed fine through Play store finally and no other issues.

If Netflix will be fixed for HD we will be talking about the perfect box around!

Unleashed by my rooted OP3T in 8.0

Forgot to mention that temperature has fallen while watching KODI.
Didn't notice more than 65 degrees. Before it was close to 75-80.

Unleashed by my rooted OP3T in 8.0

[rahzel]

Yeah the latest update is pretty solid. The only times I had random reboots were when I played several hours of video.

That said, I'm on Magendanz nano nexus rom and I haven't had a reboot, even after playing videos all day yesterday. ROM is very stable. Play store also updates.

I highly recommend it.

[RASTAVIPER]

So everything looks good so far with latest update.
Youtube plays at 1080p, Kodi 17.6 was installed fine through Play store finally and no other issues.

If Netflix will be fixed for HD we will be talking about the perfect box around!

Unleashed by my rooted OP3T in 8.0

[RASTAVIPER]

I did the update and erase data too and set up the tx92 from the start installed kodi with no problems.
In your case probably didnt erase data thats the reason you have problems, i suggest you do a factory reset and then you will be able to install kodi again the downside is you will have to start all over again.

Hmm, I will check how are things in general and if only Kodi is the problem, then I will just sideload it.

Anything else that you noticed missing?
It's really annoying having this huge button now connecting to Play store and having no way to replace it with something else.

Unleashed by my rooted OP3T in 8.0

[aeolous]

And something very strange: TV center/Kodi is gone!!
Did anyone else noticed that?
And why only this is missing?

Also, I cannot install latest official Kodi 17.6 version from Play store.
After downloading is finishing, an error appears about installing. I have tried 3 times.

Did anyone else try too?

Unleashed by my rooted OP3T in 8.0

I did the update and erase data too and set up the tx92 from the start installed kodi with no problems.
In your case probably didnt erase data thats the reason you have problems, i suggest you do a factory reset and then you will be able to install kodi again the downside is you will have to start all over again.