Mini M8S Plus II Amlogic S912 3G/eMMC32 GB unbriked help

[Maverick.Ita]

Hi guys
I've heard about you well on the web
My android box has been bricked after adding a repository in code.
bho! However it is now a brick medium.
I tried the usb tool and the procedure with the micro sd card failed both
Maybe i could use the method with trwp but i do not know the procedure
However the main is a CZ-S43-V3.1 (DDR4) 3G / 32 GB amlogic S912 64 bit
I attach front and back photos (obscured mac)
I read several posts, I tried to refill with various firmware by spiking various options. I always get error at 2% or at most 4% on U-boot download.
This is the statistical error
0x10105002 13
0x31520902 5
0x355f0902 1
0x11620902 4
0x10303004 2
I used at least four types of usb cables and three different operating systems (thinking of a possible software hardware driver incompatibility)
The image files used are the following:
aml_s912_q9377-CSA93Q3 (3 + 32_kodi17.0) -20170104_mac.img
aml_7.1_s912_q9377-S912-XGO_mac-20170619.img
aml_7.1_s912_q9377-H96PROPLUS_912_mac-20170602.img
aml_s912_q9377-H96ProPlus(3+32)_mac-20170308.img
GT1_311M0.img
TX8MAX-ddr792-20170321.img
Maybe these image files are not suitable for this device?
To break this nail there is an alternative solution?
I noticed six pitches near the s912 (yellow circle)
Can you access the terminal using a serial box? Or a j-tag?
Is there a software to access it and a detailed procedure?

Confidently look at your star

[gefattern]

Hi maverrick.Ita ,

yes there are ways to contact by Terminal or Jtag , but that is not neede to restore .

But first what WifiChip and is it DDR3 or DDR4 ???

A Link where you bought it will help , maybe , if the Site gives that info .

"shortPins" is possible on your Device , but first we need StockRom for restore ,

after that you can flash a CustomRom if want or needed . Do u have one ???

please answer , good luck ( be patient and you will get it back to life )

gefattern

[Maverick.Ita]

Hi maverrick.Ita ,

yes there are ways to contact by Terminal or Jtag , but that is not neede to restore .

But first what WifiChip and is it DDR3 or DDR4 ???

A Link where you bought it will help , maybe , if the Site gives that info .

"shortPins" is possible on your Device , but first we need StockRom for restore ,

after that you can flash a CustomRom if want or needed . Do u have one ???

please answer , good luck ( be patient and you will get it back to life )

gefattern

Hi gefattern

ok
thank you
Purchased on Aliexpress.
I thought the aliexpress assistance worked
I asked the seller and the desk helper for no success
I start thinking that aliexpress is bin.

https://www.aliexpress.com/item/M8S-PLUS-II-Android-6-0-Amlogic-S912-Octa-Core-TV-Box-3GB-32GB-Gigabit-2/32786313631.html?spm=a2g0s.9042311.0.0.zgx1kk

Contains ddr type:
Top side 2X Micron 6NB77D9TGG
Bottom side 2X Micron 6EA47D9RSL
WifiChip Name: 8223A-SR
Main chip: QCA9377
Details about
http://www.fn-link.com/uploadfile/20...6023011324.pdf

[gefattern]

Hi once more ,

is it mini , or only M8SPlusII ??? You say Mini , Link says only M8S+II .

is it really a S912 or S905 or S905X , can u read it on the Chip ??? , not

sure until now , maybe they gave wrong Info , this often happens , there .

Could not find a StockRom until now , but there are CustomRoms , if it

is really a S912 .

The Box is still recognised by PC , please report , later i post a Link for

CustomRom , maybe others too .

write you later

gefattern

[gefattern]

Hi again ,

please try this brand new FW , for maybe same Board only other Name :

http://freaktab.com/forum/tv-player-support/azw/azw-android-tv-box/mini-i/firmware-roms-tools-cn/656249-mini-m8s-pro-android7-1-os

try nothing really bad can happen , only a working Box as HE wants , good luck and report .

gefattern

[gefattern]

Hi again ,

found another one

http://freaktab.com/forum/tv-player-...android-tv-7-1

good luck

gefattern

[Maverick.Ita]

Hi once more ,

is it mini , or only M8SPlusII ??? You say Mini , Link says only M8S+II .

is it really a S912 or S905 or S905X , can u read it on the Chip ??? , not

sure until now , maybe they gave wrong Info , this often happens , there .

Could not find a StockRom until now , but there are CustomRoms , if it

is really a S912 .

The Box is still recognised by PC , please report , later i post a Link for

CustomRom , maybe others too .

write you later

gefattern

I did a photo. It's amlogic S912
On the cover there is written mini M8S Plus II
It is recognized only through a USB burning tool
Meanwhile I try the two firmware that you linked to me and let me know

see you later

[gefattern]

Hi Maverick.Ita ,

please try only the Firmware of Post 5 , not sure if the other is for DDR3 Devices too ,

we must first ask .

good luck

gefattern

[gefattern]

your Picture says you have DDR4

[Maverick.Ita]

Hi Maverick.Ita ,

please try only the Firmware of Post 5 , not sure if the other is for DDR3 Devices too ,

we must first ask .

good luck

gefattern

gefattern
tried
Always the usual mistakes
I attach log

[10:38:53 148][Global][Inf]--Scan usb device
[10:38:53 148][Global][Inf]--Aml scan WorldCup Device
[10:38:53 148][Global][Inf]--Host: Controller Enhanced Host USB Intel(R) famiglia chipset serie 5/serie 3400 - 3B34
[10:38:53 148][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_3b34&subsys_00b91b0a& rev_06#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[10:38:53 148][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&355073b1&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[10:38:53 148][Global][Inf]-------->[Port0]USB#VID_8087&PID_0020#5&3301631c&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[10:38:53 148][Global][Inf]---------->[Port0]NoDeviceConnected
[10:38:53 148][Global][Inf]---------->[Port1]Other device
[10:38:53 148][Global][Inf]---------->[Port2]\\?\usb#vid_1b8e&pid_c003#6&91daa12&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[10:38:53 148][Global][Inf]---------->[Port3]NoDeviceConnected
[10:38:53 148][Global][Inf]---------->[Port4]NoDeviceConnected
[10:38:53 164][Global][Inf]---------->[Port5]Other device
[10:38:53 164][Global][Inf]---------->[Port6]NoDeviceConnected
[10:38:53 164][Global][Inf]---------->[Port7]NoDeviceConnected
[10:38:53 164][Global][Inf]-------->[Port1]NoDeviceConnected
[10:38:53 164][Global][Inf]--Host: Controller Enhanced Host USB Intel(R) famiglia chipset serie 5/serie 3400 - 3B3C
[10:38:53 164][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_3b3c&subsys_00b91b0a& rev_06#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[10:38:53 164][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&1cd2257c&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[10:38:53 261][Global][Inf]-------->[Port0]USB#VID_8087&PID_0020#5&348e64a5&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[10:38:53 261][Global][Inf]---------->[Port0]NoDeviceConnected
[10:38:53 261][Global][Inf]---------->[Port1]NoDeviceConnected
[10:38:53 261][Global][Inf]---------->[Port2]NoDeviceConnected
[10:38:53 261][Global][Inf]---------->[Port3]NoDeviceConnected
[10:38:53 261][Global][Inf]---------->[Port4]NoDeviceConnected
[10:38:53 261][Global][Inf]---------->[Port5]Other device
[10:38:53 261][Global][Inf]-------->[Port1]NoDeviceConnected
[10:38:53 261][Global][Inf]--Scan USB host controller complete
[10:38:53 261][Global][Inf]--Update data center with HubMap
[10:38:53 261][Global][Inf]--Insert new hub2
[10:38:53 261][Global][Inf]--Update hub2 device data
[10:38:53 261][Global][Inf]--Update HUB2-1
[10:38:53 261][HUB2-1][Inf]--Update device path
[10:38:53 261][Global][Inf]--Update HUB2-2
[10:38:53 261][HUB2-2][Inf]--Update device path
[10:38:53 261][Global][Inf]--Update HUB2-3 \\?\usb#vid_1b8e&pid_c003#6&91daa12&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[10:38:53 261][HUB2-3][Inf]--Update device path
[10:38:53 261][Global][Inf]--Begin thread for HUB2-3
[10:38:53 261][Global][Inf]--Burning thread HUB2-3 start
[10:38:53 261][Global][Inf]--Update HUB2-4
[10:38:53 261][HUB2-4][Inf]--Update device path
[10:38:53 261][Global][Inf]--Burning thread HUB2-3 begin run
[10:38:53 261][Global][Inf]--Update HUB2-5
[10:38:53 261][HUB2-5][Inf]--Update device path
[10:38:53 261][Global][Inf]--Update HUB2-6
[10:38:53 261][HUB2-6][Inf]--Update device path
[10:38:53 261][Global][Inf]--Update HUB2-7
[10:38:53 261][HUB2-7][Inf]--Update device path
[10:38:53 261][Global][Inf]--Update HUB2-8
[10:38:53 261][HUB2-8][Inf]--Update device path
[10:38:58 752][Global][Inf]--User click open button
[10:39:03 657][Global][Inf]--Image path C:\Users\goldf\Downloads\MINI M8S PRO_703N0_LTM8830.img
[10:39:28 804][Global][Inf]--Parsing burning package
[10:39:28 804][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
[10:39:28 820][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xm l
[10:39:28 871][Global][Inf]--Get burning key
[10:39:34 502][Global][Inf]--User click start button
[10:39:34 502][Global][Inf]--SetErase
[10:39:34 502][Global][Inf]--Enable burning 1
[10:39:34 502][Global][Inf]--Scan usb device
[10:39:34 502][Global][Inf]--Aml scan WorldCup Device
[10:39:34 502][Global][Inf]--Host: Controller Enhanced Host USB Intel(R) famiglia chipset serie 5/serie 3400 - 3B34
[10:39:34 502][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_3b34&subsys_00b91b0a& rev_06#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[10:39:34 502][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&355073b1&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[10:39:34 502][Global][Inf]-------->[Port0]USB#VID_8087&PID_0020#5&3301631c&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[10:39:34 502][Global][Inf]---------->[Port0]NoDeviceConnected
[10:39:34 502][Global][Inf]---------->[Port1]Other device
[10:39:34 502][Global][Inf]---------->[Port2]\\?\usb#vid_1b8e&pid_c003#6&91daa12&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[10:39:34 502][Global][Inf]---------->[Port3]NoDeviceConnected
[10:39:34 502][Global][Inf]---------->[Port4]NoDeviceConnected
[10:39:34 502][Global][Inf]---------->[Port5]Other device
[10:39:34 502][Global][Inf]---------->[Port6]NoDeviceConnected
[10:39:34 502][Global][Inf]---------->[Port7]NoDeviceConnected
[10:39:34 502][Global][Inf]-------->[Port1]NoDeviceConnected
[10:39:34 502][Global][Inf]--Host: Controller Enhanced Host USB Intel(R) famiglia chipset serie 5/serie 3400 - 3B3C
[10:39:34 502][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_3b3c&subsys_00b91b0a& rev_06#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[10:39:34 502][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&1cd2257c&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[10:39:34 517][HUB2-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&91daa12&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x0000077c
[10:39:34 593][HUB2-3][Inf]--CloneImageProxy
[10:39:34 613][Global][Inf]-------->[Port0]USB#VID_8087&PID_0020#5&348e64a5&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[10:39:34 613][Global][Inf]---------->[Port0]NoDeviceConnected
[10:39:34 613][Global][Inf]---------->[Port1]NoDeviceConnected
[10:39:34 613][Global][Inf]---------->[Port2]NoDeviceConnected
[10:39:34 613][Global][Inf]---------->[Port3]NoDeviceConnected
[10:39:34 613][Global][Inf]---------->[Port4]NoDeviceConnected
[10:39:34 613][Global][Inf]---------->[Port5]Other device
[10:39:34 613][Global][Inf]-------->[Port1]NoDeviceConnected
[10:39:34 613][Global][Inf]--Scan USB host controller complete
[10:39:34 613][Global][Inf]--Update data center with HubMap
[10:39:34 613][Global][Inf]--Update hub2 device data
[10:39:34 613][Global][Inf]--Update HUB2-1
[10:39:34 613][HUB2-1][Inf]--Update device path
[10:39:34 613][Global][Inf]--Update HUB2-2
[10:39:34 613][HUB2-2][Inf]--Update device path
[10:39:34 613][Global][Inf]--Update HUB2-3 \\?\usb#vid_1b8e&pid_c003#6&91daa12&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[10:39:34 613][HUB2-3][Inf]--Update device path
[10:39:34 613][Global][Inf]--Update HUB2-4
[10:39:34 613][HUB2-4][Inf]--Update device path
[10:39:34 613][Global][Inf]--Update HUB2-5
[10:39:34 613][HUB2-5][Inf]--Update device path
[10:39:34 613][Global][Inf]--Update HUB2-6
[10:39:34 613][HUB2-6][Inf]--Update device path
[10:39:34 613][Global][Inf]--Update HUB2-7
[10:39:34 613][HUB2-7][Inf]--Update device path
[10:39:34 613][Global][Inf]--Update HUB2-8
[10:39:34 613][HUB2-8][Inf]--Update device path
[10:39:34 613][HUB2-3][Inf]--Connect path=Controller Enhanced Host USB Intel(R) famiglia chipset serie 5/serie 3400 - 3B34/P0/P0/P2
[10:39:34 613][HUB2-3][Inf]--Start burning...
[10:39:34 691][HUB2-3][Inf]--------------ERASE BOOTLOADER------------
[10:39:34 718][HUB2-3][Inf]--2-2-0-0
[10:39:34 749][HUB2-3][Inf]-------------Download DDR.USB-----------
[10:39:34 749][HUB2-3][Inf]--Close device handle 0x0000077c
[10:39:34 818][HUB2-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&91daa12&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x0000077c
[10:39:34 880][HUB2-3][Inf]--2-2-0-0
[10:39:34 880][HUB2-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[10:39:35 396][HUB2-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
[10:39:35 918][HUB2-3][Inf]--Write initial succeed
[10:39:35 918][HUB2-3][Inf]--Upload encrypt at 0xc8100228
[10:39:35 918][HUB2-3][Inf]--ulValue = 0xadfc318c
[10:39:35 918][HUB2-3][Inf]--Read encrypt value succeed
[10:39:35 918][HUB2-3][Inf]--Transfer complete
[10:39:35 918][HUB2-3][Inf]--Run at address 0xd9000000
[10:39:35 949][HUB2-3][Inf]--RunInRam succeed
[10:39:36 280][HUB2-3][Inf]--2-2-0-0
[10:39:36 280][HUB2-3][Inf]--CheckFileRunState succeed
[10:39:36 280][HUB2-3][Inf]--runResult:0x 0,paraMagic:0x7856efab
[10:39:36 280][HUB2-3][Inf]--ddrCapacity:0x c00
[10:39:36 280][HUB2-3][Inf]-------------Download UBOOT.USB-----------
[10:39:36 280][HUB2-3][Inf]--2-2-0-0
[10:39:36 280][HUB2-3][Inf]--ulValue = 0xadfc318c
[10:39:36 280][HUB2-3][Inf]--Download DDR.USB buffer at 0xd9000000
[10:39:36 301][HUB2-3][Inf]--Transfer complete
[10:39:36 301][HUB2-3][Inf]--Download UBOOT.USB buffer at 0x0200c000
[10:39:36 417][HUB2-3][Inf]--Transfer complete
[10:39:36 417][HUB2-3][Inf]--DownCheckPara succeed
[10:39:36 417][HUB2-3][Inf]--Run at address 0xd9000000
[10:39:36 464][HUB2-3][Err]--generatedAddSum:0x141dcf4e;srcAddSum:0x8af833a1;ru nResult:0x e6;paraMagic:0x7856efab
[10:39:36 464][HUB2-3][Inf]--ReadCheckPara failed
[10:39:36 596][HUB2-3][Err]--[0x79640902]Unknown
[10:39:36 596][HUB2-3][Inf]--Close device handle 0x0000077c
[10:39:42 400][Global][Inf]--User click refresh button
[10:39:42 435][Global][Inf]--Burning thread HUB2-3 start
[10:39:42 498][HUB2-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&91daa12&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000740
[10:39:42 551][HUB2-3][Inf]--Connect path=Controller Enhanced Host USB Intel(R) famiglia chipset serie 5/serie 3400 - 3B34/P0/P0/P2
[10:39:42 551][HUB2-3][Inf]--Start burning...
[10:39:42 620][HUB2-3][Inf]--------------ERASE BOOTLOADER------------
[10:39:42 620][HUB2-3][Inf]--2-2-0-0
[10:39:42 620][HUB2-3][Inf]-------------Download DDR.USB-----------
[10:39:42 620][HUB2-3][Inf]--2-2-0-0
[10:39:42 620][HUB2-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[10:39:43 136][HUB2-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
[10:39:43 639][HUB2-3][Inf]--Write initial succeed
[10:39:43 639][HUB2-3][Inf]--Upload encrypt at 0xc8100228
[10:39:43 639][HUB2-3][Inf]--ulValue = 0xadfc318c
[10:39:43 639][HUB2-3][Inf]--Read encrypt value succeed
[10:39:43 648][HUB2-3][Inf]--Transfer complete
[10:39:43 648][HUB2-3][Inf]--Run at address 0xd9000000
[10:39:43 649][HUB2-3][Inf]--RunInRam succeed
[10:39:43 989][HUB2-3][Inf]--2-2-0-0
[10:39:43 990][HUB2-3][Inf]--CheckFileRunState succeed
[10:39:43 990][HUB2-3][Inf]--runResult:0x 0,paraMagic:0x7856efab
[10:39:43 990][HUB2-3][Inf]--ddrCapacity:0x c00
[10:39:43 990][HUB2-3][Inf]-------------Download UBOOT.USB-----------
[10:39:43 990][HUB2-3][Inf]--2-2-0-0
[10:39:43 990][HUB2-3][Inf]--ulValue = 0xadfc318c
[10:39:43 990][HUB2-3][Inf]--Download DDR.USB buffer at 0xd9000000
[10:39:43 998][HUB2-3][Inf]--Transfer complete
[10:39:43 998][HUB2-3][Inf]--Download UBOOT.USB buffer at 0x0200c000
[10:39:44 091][HUB2-3][Inf]--Transfer complete
[10:39:44 092][HUB2-3][Inf]--DownCheckPara succeed
[10:39:44 092][HUB2-3][Inf]--Run at address 0xd9000000
[10:39:44 137][HUB2-3][Err]--generatedAddSum:0x12e3f93e;srcAddSum:0x8af833a1;ru nResult:0x e6;paraMagic:0x7856efab
[10:39:44 137][HUB2-3][Inf]--ReadCheckPara failed
[10:39:44 233][HUB2-3][Err]--[0x79640902]Unknown
[10:39:44 233][HUB2-3][Inf]--Close device handle 0x00000740
[10:39:55 065][Global][Inf]--User click refresh button
[10:39:55 118][Global][Inf]--Burning thread HUB2-3 start
[10:39:55 180][HUB2-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&91daa12&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000740
[10:39:55 233][HUB2-3][Inf]--Connect path=Controller Enhanced Host USB Intel(R) famiglia chipset serie 5/serie 3400 - 3B34/P0/P0/P2
[10:39:55 233][HUB2-3][Inf]--Start burning...
[10:39:55 296][HUB2-3][Inf]--------------ERASE BOOTLOADER------------
[10:39:55 296][HUB2-3][Inf]--2-2-0-0
[10:39:55 296][HUB2-3][Inf]-------------Download DDR.USB-----------
[10:39:55 296][HUB2-3][Inf]--2-2-0-0
[10:39:55 297][HUB2-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[10:39:55 817][HUB2-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
[10:39:56 333][HUB2-3][Inf]--Write initial succeed
[10:39:56 333][HUB2-3][Inf]--Upload encrypt at 0xc8100228
[10:39:56 333][HUB2-3][Inf]--ulValue = 0xadfc318c
[10:39:56 333][HUB2-3][Inf]--Read encrypt value succeed
[10:39:56 333][HUB2-3][Inf]--Transfer complete
[10:39:56 333][HUB2-3][Inf]--Run at address 0xd9000000
[10:39:56 333][HUB2-3][Inf]--RunInRam succeed
[10:39:56 680][HUB2-3][Inf]--2-2-0-0
[10:39:56 680][HUB2-3][Inf]--CheckFileRunState succeed
[10:39:56 680][HUB2-3][Inf]--runResult:0x 0,paraMagic:0x7856efab
[10:39:56 680][HUB2-3][Inf]--ddrCapacity:0x c00
[10:39:56 680][HUB2-3][Inf]-------------Download UBOOT.USB-----------
[10:39:56 680][HUB2-3][Inf]--2-2-0-0
[10:39:56 680][HUB2-3][Inf]--ulValue = 0xadfc318c
[10:39:56 680][HUB2-3][Inf]--Download DDR.USB buffer at 0xd9000000
[10:39:56 696][HUB2-3][Inf]--Transfer complete
[10:39:56 697][HUB2-3][Inf]--DownRunPara succeed
[10:39:56 697][HUB2-3][Inf]--Run at address 0xd9000000
[10:40:08 805][HUB2-3][Inf]--Detect Device remove timeout
[10:40:08 805][HUB2-3][Inf]--Device is connected
[10:40:08 805][HUB2-3][Inf]--Close device handle 0x00000740
[10:40:08 867][HUB2-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&91daa12&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000870
[10:40:13 926][HUB2-3][Inf]--2-2-0-0
[10:40:13 926][HUB2-3][Err]--CheckFileRunState failed
[10:40:13 926][HUB2-3][Inf]--Failure : 1, FailureMax : 3
[10:40:14 457][HUB2-3][Err]--[10:40:14 457][HUB2-3][Inf]--Failure : 2, FailureMax : 3
[10:40:14 959][HUB2-3][Err]--[10:40:14 959][HUB2-3][Inf]--Failure : 3, FailureMax : 3
[10:40:15 027][HUB2-3][Err]--[0x10303004]Romcode/Switch status/Identify/Error result
[10:40:15 027][HUB2-3][Inf]--Close device handle 0x00000870

[gefattern]

Hi maverrick.Ita :

so thats for sure not the right one .

Did you already ask in the linked Thread of Post 6 if it is for DDR4 Devices ???

before it is not needed to start or try , but that do you determine .

I ask the other Mod. what posssible Rom could work for you ??? , because i am

no AML Pro , like others .

greetings

gefattern

[Maverick.Ita]

Hi gefattern

Thank you for your interest in my problem.
From the photo i would say ddr4 or not?
I used file.img for ddr4 without success
I think I lost a little. Then:
1- is an address allocation problem in rom?
2-Do you need to modify u-boot statements using TTL interface by taking cues from a guide like this?https://www.cnx-software.com/2015/12...mx-or-k1-plus/
3- I tried a dozen img files of different products. All fail. Can never on the face of the earth be the only one to have this kind of android tv?
I ask about the other discussion at Magendanz if her rom is compatible with ddr4

see you

[scooter2014]

Hi. Lets try the basic..

Amilogic burning tool... You must have the Licence files installed into the birning tool Licence folder. (Have you done this?)

If not then I have to look for file. This gets put into the burn tool dir and may fix part of problem.

[scooter2014]

Its ddr4 and Also 9377 so few roms will work. Rather then re posting lets go step by step.

Here is the licence file just un pack on Windows in to burning tool/ licence folder.

https://www.dropbox.com/s/8gwrcd6d43t6pqj/mac_ether.ini?dl=0

Regards.

[gefattern]

Hi scooter ,

thanks that you help to get him back to life . ( I am really a AML Noob )

greetings gefattern

[Maverick.Ita]

Hi. Lets try the basic..

Amilogic burning tool... You must have the Licence files installed into the birning tool Licence folder. (Have you done this?)

If not then I have to look for file. This gets put into the burn tool dir and may fix part of problem.

Hi scooter

It's okay
The license file is placed in the right place
I also own this licensing package

https://onedrive.live.com/?cid=AF75A2B774049762&id=AF75A2B774049762%21474&parId=AF75A2B774049762%21473&o=OneUp