[CUSTOM ROM NEEDED] R-TV S10 3GB/32GB (DDR4) 7.1.2

[danielelek90]

Hi guys!

I hope all is well!

I am currently on the hunt for a custom ROM for the R-TV S10 3GB/32GB DDR4 - I have looked everywhere with no results and am wondering if anyone can help point me in the right direction? The stock firmware is OK however, there is no top notification bar which is REALLY inconvenient.

I hope you can help! I look forward to hearing from you!

[gefattern]

Hi danielelek90 ,

i think Supercelerons Rom works on your Box :

http://freaktab.com/forum/tv-player-...ndroid-tv-ddr4

or maybe this too :

http://freaktab.com/forum/tv-player-...ndroid-tv-ddr4

but important ask there first before you do anything , good luck

greetings

gefattern

[danielelek90]

Thanks very much! I found this ROM yesterday but the burner tool kept having the lowper error however, some good news! I fired up my old Windows XP laptop an VOILA the burner tool worked and now have SuperCelerons ROM up and running! It's amazing!

Thanks for your help!

[danielelek90]

For those who want the easier option (you no longer have to use TWRP to flash the wifi) there is a ROMMOD at this link. I hope it will help anyone in need!

http://freaktab.com/forum/tv-player-...ndroid-tv-ddr4

EDIT:

Just realised gefattern had already posted this link originally! Happy flashing!!

[djdave79]

Which is the otg usb port. or is it possible to fastboot

[demonpt]

anyone got the file of the original remote ? i forgot to back it up

[demonpt]

i will put it latter !

[irezan]

hi denielelek90,

this rom work perfectly with you R-tv s10, i'm using stock rom for my R-TV s10, got a lot of problem, apps keep freezing and crashing. Do you face same problem before you change the Rom?

thanks

[androidbill]

You can find this Rom here: https://chinagadgetsreviews.com/down...box-s10-2.html

[demonpt]

remote:


#************************************************* ************************************************** ******

#this file is configuration for each factory remote device

# work_mode 0 :software mode 1 :hardware mode

# repeat_enable 0 :disable repeat 1 :enable repeat

#

# factory_code each device has it's unique factory code.

# pattern:custom_code(16bit)+index_code(16bit)

# examble: 0xff000001 = 0xff00(custom cod) 0001 (index)

#

# release_delay unit:ms.release will report from kernel to user layer after this period of time

# from press or repeat triggered.

#

# debug_enable 0 :debug disable 1 :debug disable

#

# SW MODE:

# bit_count how many bits in each frame

# tw_leader_act time window for leader active

# tw_bit0 time window for bit0 time.

# tw_bit1 time window for bit1 time

# tw_repeat_leader time window for repeat leader

# REG

# reg_base_gen set value for PREG_IR_DEC_BASE_GEN

# reg_control set value for PREG_IR_DEC_CONTROL

# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE

# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE

# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE

# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME

#************************************************* ************************************************** **********

#amlogic NEC remote

factory_code = 0x7f800001

work_mode = 0

repeat_enable = 1

repeat_delay = 40

repeat_peroid = 39

release_delay = 121

debug_enable = 0


fn_key_scancode = 0x48

left_key_scancode = 0x37

right_key_scancode = 0x39

up_key_scancode = 0x38

down_key_scancode = 0x40

ok_key_scancode = 0x13

#pageup_key_scancode = 0x55

#pagedown_key_scancode = 0x54


mouse_begin

0 0x37

1 0x39

2 0x38

3 0x40

mouse_end


key_begin

0x81 116

0x83 125

0x73 102

0x37 105

0x39 106

0x38 103

0x40 108

0x13 97

0x27 15

0x89 109

0x87 104

0x48 63

key_end

repeat_key_begin

0x81 116

0x83 125

0x73 102

0x37 105

0x39 106

0x38 103

0x40 108

0x13 97

0x27 15

0x89 109

0x87 104

0x48 63

repeat_key_end