Mecool M8s Pro + - Nand Mask ROM flash method

[polve93]

In the red mark?see my photo, i put a circle

I didn't see the mark, my fault. I tried but always the same result Now i put down the procedure i'm doing, tell me if i'm doing something wrong.

1- Open usb burning tool, load the image (20170825.img located here http://freaktab.org/27~f ) and press start
2- while pins shorted insert the usb otg cable to pc
3- release the shorted pins when the tool recognize the box ( i also tried keeping the pins shorted but nothing changed)

Process always stops at 4% or 10% (error result or timeout error)

[intenseone]

I didn't see the mark, my fault. I tried but always the same result Now i put down the procedure i'm doing, tell me if i'm doing something wrong.

1- Open usb burning tool, load the image (20170825.img located here http://freaktab.org/27~f ) and press start
2- while pins shorted insert the usb otg cable to pc
3- release the shorted pins when the tool recognize the box ( i also tried keeping the pins shorted but nothing changed)

Process always stops at 4% or 10% (error result or timeout error)

Forget your mod, try what i said. But, try this firmware https://chinagadgetsreviews.com/down...-tv-box-3.html. remember, stop shorted when the PC make the plug sound. Ohttps://chinagadgetsreviews.com/download-android-nougat-7-1-firmware-mecool-m8s-pro-plus-tv-box-3.html is the second USB, first you have SD slot, 1usb and then the second or the last USB

[intenseone]

https://youtu.be/N27pAxtcDSg

[polve93]

remember, stop shorted when the PC make the plug sound

pc never make the plug sound, by now i think my chip has gone

[4everAnoob]

Help!!
I can't get past 4% no matter what

I have to use masked mode to even get my box detected
I use a home made usb cable, it is now less than 15 cm and it still won't work. Anything left for me to do?

[palerider]

Just for shits and gigles, install the license for USB burning tool and try again!