After 3 days of trying everything to flash the box it freezed on me..
It was a rooted box with faulty software.
I thougt i could flash it.
But when I did it with the SD I got the message the software wasn't right i needed a p201 software.
Ok than I tried the P201 software the message tghan was the software was to old zo i tried also with The USB burning tool. i always gets an error woth 1%
so i kept trying with TWRP and SD card and at last i got the message it was a Nexbox A95x. Grrrrr.
But when i tried that one the box bricked.
I only get 1 red led. An d can't get in recovery mode anymore
I have already tried the USB burning tool again but awas shuts down after 1%.
The USB cable is a new 2.0 cable.
I dont have any other things in the USB ports of my laptop.
Has anybody got an idea to try??
Excuse me for my poor English.
[08:53:20 792][Global][Inf]--Burning thread HUB3-1 start
[08:53:20 854][HUB3-1][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&17f716cc&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000008e8
[08:53:20 916][HUB3-1][Inf]--Connect path=USB xHCI-compatibele hostcontroller/P0/P0
[08:53:20 916][HUB3-1][Inf]--Start burning...
[08:53:20 978][HUB3-1][Inf]--------------ERASE BOOTLOADER------------
[08:53:20 978][HUB3-1][Inf]--2-0-0-0
[08:53:20 978][HUB3-1][Inf]-------------Download DDR.USB-----------
[08:53:20 979][HUB3-1][Inf]--2-0-0-0
[08:53:20 979][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[08:53:21 489][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x00005183
[08:53:22 000][HUB3-1][Inf]--Write initial succeed
[08:53:22 000][HUB3-1][Inf]--Upload encrypt at 0xc8100228
[08:53:22 000][HUB3-1][Inf]--ulValue = 0xedfc318c
[08:53:22 000][HUB3-1][Inf]--Read encrypt value succeed
[08:53:32 015][HUB3-1][Err]--Download file failed, sequence 0
[08:53:32 015][HUB3-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error
[08:53:32 015][HUB3-1][Inf]--Failure : 1, FailureMax : 3
[08:53:32 015][HUB3-1][War]--[08:53:42 016][HUB3-1][Err]--Download file failed, sequence 0
[08:53:42 016][HUB3-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error
[08:53:42 016][HUB3-1][Inf]--Failure : 2, FailureMax : 3
[08:53:42 016][HUB3-1][War]--[08:53:52 028][HUB3-1][Err]--Download file failed, sequence 0
[08:53:52 028][HUB3-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error
[08:53:52 028][HUB3-1][Inf]--Failure : 3, FailureMax : 3
[08:53:52 263][HUB3-1][Err]--[0x10103003]Romcode/Initialize DDR/Download buffer/USB transfer error
[08:53:52 263][HUB3-1][Inf]--Close device handle 0x000008e8
[08:56:51 397][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
Comment