HELP!! MXQ-4K RK3229 (MASKROM) Test Device Failed

[Gilvision]

My OTT TV Box MXQ-4k got briced after i rooted it and flashed with a with a incorrect firmware. I followed the instructions here http://ugoos.net/blog/reflashing-in-...device-bricked
I am getting a Test Device error I am using RBT v1.7 with USB Drive 3.5

Any help will be greatly appreciated

[Gilvision]

Sorry i had posted the photos as attachment earlier but this is what i have.

[Gilvision]

I think i find out what the problem is the firmware. I tired a firmware (Scishion V88 RK3229 ) that i found in a different topic on here and it worked but the wifi and Ethernet does not work.
I went back and tried a few update firmware's for MXQ-4k but one of them worked the either brick the device or give a IDB Fail in Maskrom mode and i have to re circuit the pins http://ugoos.net/blog/reflashing-in-...device-bricked.

Anybody have copy of the original firmware for this model or the wifi and Ethernet driver?

[Gilvision]

Fixed !!!
follow the instructions here. Have some patients as the system will take a long time to boot or you may have to reboot it a few time also you will have to flash the wifi drivers manually its all int he instructions

http://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3229-devices/firmware-roms-tools-bg/643836-ugoos-ut6-full-1080p-firmware-install-on-scishion-v88-with-working-wifi

[tdog1170]

What firmware did you use? My box did the sam thing

[Gilvision]

I used this Firmware: Make sure that your box wifi is SV6051P The V88 and the MXQ-4K use the RK3229 ROM.

Ugoos UT6 full 1080p firmware install on Scishion V88 with working wifi

1) Flash Ugoos UT6 1.1.1 firmware with RKAndroidTool
https://mega.nz/#!Gc5GlLSI!qkyqhQtih...1CFA0V1Xll3awg
2) On first boot change Settings->App->Gear icon->Detault apps->Assist and Voice Input>-Assist App->None (otherwise changes to Google app will cause bootloop)
3) Flash TWRP by Gemini with RKAndroidTool
http://www.mediafire.com/file/55qe91...P_recovery.img
4) Flash 6051 kernel patch in TWRP to enable wifi
http://www.mediafire.com/file/wgr5y2...hssv6051p2.zip

Known issues:
-no infrared remote (UT6 doesn't have IR sensor)
-power/sleep LED doesn't work
-Google Play store says "App is not compatible with this version" for many apps, but they run fine by installing APK directly