Beelink GS1 firmware and tools

[Boban.cro]

http://www.bee-link.com/forum.php?mod=viewthread&tid=27321&extra=page=1&mobile=2,let

[trebor]

SD card zip : （ota_GS1_101N0.zip）：

https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?folderid=1b5dc7343666a4f8baec9a7a584f47359&authkey=AUUtsyawWhsUISY0ReQeTCA&e=c0042fd6f47e455cb2c2a77154691ee1

usb burning tool :

https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?docid=12dc4c7891e8644a0bee6b900dd 3d0b97&authkey=AccwbdLr_86eEGEEucoSJv8&e=916044d23 0f6469689be6c709dbf403d

USB updating :

1. Install the allwinner USB burning tool first ;
2. Click the PhoenixUSBPro.exe in your desktop and run it ;
3. Click the upper left button to load the firmware file from your pc ;4. Click the lunch button on this interface ;
5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind that the USB2.0 is used for updating but USB3.0 . after that , it is a
recognization sign that the red X ( upper right corner）turns green .
6. Finish this updating .

SD card updating :

1. copy this file (ota_GS1_101N0.zip) to your TF card or U-disk and then insert the TV box ;
2. go in the setting > click the option of "about the media" > choose the first option > choose file > load the ota_GS1_101N0.zip ;
3. the systen will recognize this update zip automatically when you run it well and then shut down to go in the update mode , you need to make sure that Power
supply must be firmly good enough to finish this updating , power outages would contribute to a failure .

Source: beelink

[Boban.cro]

SD card zip : （ota_GS1_101N0.zip）：

https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?folderid=1b5dc7343666a4f8baec9a7a584f47359&authkey=AUUtsyawWhsUISY0ReQeTCA&e=c0042fd6f47e455cb2c2a77154691ee1

usb burning tool :

https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?docid=12dc4c7891e8644a0bee6b900dd 3d0b97&authkey=AccwbdLr_86eEGEEucoSJv8&e=916044d23 0f6469689be6c709dbf403d

USB updating :

1. Install the allwinner USB burning tool first ;
2. Click the PhoenixUSBPro.exe in your desktop and run it ;
3. Click the upper left button to load the firmware file from your pc ;4. Click the lunch button on this interface ;
5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind that the USB2.0 is used for updating but USB3.0 . after that , it is a
recognization sign that the red X ( upper right corner）turns green .
6. Finish this updating .

SD card updating :

1. copy this file (ota_GS1_101N0.zip) to your TF card or U-disk and then insert the TV box ;
2. go in the setting > click the option of "about the media" > choose the first option > choose file > load the ota_GS1_101N0.zip ;
3. the systen will recognize this update zip automatically when you run it well and then shut down to go in the update mode , you need to make sure that Power
supply must be firmly good enough to finish this updating , power outages would contribute to a failure .

Source: beelink

Here the usb img.upgrade

USB  zip :（update_GS1_101N0.img）：


https://beelink-my.sharepoint.com/pe...417688f869b492 7b064e&authkey=AXCj52v8ULqWvnEf2tAu3yc&e=34c907f74 d944ad98bd9125947ae47ca

[trebor]

Just be sure
I think the File is Incorrect unless they have fixed.

I have been advised there will be an OTA update next 24 hours

New firmware 102 for GS1 released today,

Change log:

1. solving update error from differential packet,.
2. solving no response by clicking "enable startup wizard" in setting.
3. solving system crash if HDD over 2TB connected.
4. Adding updating by TF card(last version support updating by U-disk).
5. solving music player pop up when select video files in file manager.
6. optimizing video play.
7. fixing RCU back button no repsonse when in Kodi.
8. updating wifi driver to solve wifi reconnection problem after drop.

[Boban.cro]

Just be sure
I think the File is Incorrect unless they have fixed.

I have been advised there will be an OTA update next 24 hours

New firmware 102 for GS1 released today,

Change log:

1. solving update error from differential packet,.
2. solving no response by clicking "enable startup wizard" in setting.
3. solving system crash if HDD over 2TB connected.
4. Adding updating by TF card(last version support updating by U-disk).
5. solving music player pop up when select video files in file manager.
6. optimizing video play.
7. fixing RCU back button no repsonse when in Kodi.
8. updating wifi driver to solve wifi reconnection problem after drop.

Ok.Thanks? Because It is good to know, I have not yet received my gs1