MXQ Pro 4k goes no further than the word ANDROID

[Scratch]

Hey team,
Have a MXQ Pro that can't get past Android, was working perfectly fine. No changes made by me and less than a month old.
Some Google searching suggests that it my be bricked and to try a soft reset. Tried this without luck. Is running 7.1.
Any advice would be appreciated.
Cheers

[neomode]

Hello,

So i guess you have an Newer MXQ PRO 4K Box with an S905W CPU.
Can you please confirm that?

Neomode

[Scratch]

According to the description of what I bought they say S905X Quad core.
Cheers

[Rockabilly65]

https://yadi.sk/d/weKOyhxQ3R9z4F  I have upgrade my mxq pro 4k rk3229 to 7.1.2 so there is box with this version firmware to. Best if you could take it apart and read on chip.

[Scratch]

Sweet will check and come back to you

[Scratch]

On the Android recovery screen it has RK322x box

[Rockabilly65]

Then you have a rockchip box and the firmware above should work.

[Scratch]

Are you able to provide me with some instructions please. I have tried following some instructions I found online that use the USB burning tool but I can't get the MXQ to show up in the burning tool.
Cheers

[neomode]

Hello Scratch

You have an Rockchip Box and the USB Burning Tool is for AMLOGIC Boxes so it can´t regonize the MXQ.
For Rockchip you need the Android Tool you can find here --> http://freaktab.org/4a4abef777368a8d
You also need the Drivers these are included in the Download.

Neomode

[Scratch]

Thanks, I will give this a try now.

[Scratch]

Ok, box picked up ran firmware and still stuck on Android screen. I must be doing something wrong.
Help please.

[Scratch]

Hi team, thanks for the help. The box is running again!!! A quick question Neomode, what version of Android is the firmware you provided? Is it 6?

[neomode]

My Firmware is not for the Rockchip Boxes sorry.

Regards
Neomode

[Scratch]

You beauty Rockabilly, up and running again and looks exactly like what I had.
Thanks to all of you for the help given, you're all rockstars!!!

[Scratch]

Hey guys, I have another quick question when I checked the storage of the box I have it says it's only 4GB, would this be right or is it because of the firmware I have loaded? It should be at least 8GB.
Cheers