TANIX TX3 Max & Mini - DUAL OS EDITION - LibreELEC + Android -> (S905W)

[carretto]

Hello, does anyone have news of a newer firmware than TX3Mini-20181210.img that has been tested and does it work?

[Emon]

I tried several times not responding at all.. it can't be recognised.. I tried two or more image files.. tried the two USB ports. the reset button never worked.. I need ur help to short the right pins.. thank you.

[Emon]

My device TX3 mini (type A) is 2019 hardware, so I can't install any firmware that provides from the homepage. I also found a customized firmware, it work for my device.

Which firmware worked for you?

[rapht1]

Help img s905w

I've looked everywhere for this ROM and I haven't found it, did you get it?

[jeffersonfarofa]

[jeffersonfarofa]

Help img s905w

I tried several times not responding at all.. it can't be recognised.. I tried two or more image files.. tried the two USB ports. the reset button never worked.. I need ur help to short the right pins.. thank you.

Topic from atvX forum for flashing right FW and reset pin instructions for your box.

https://forum.atvxperience.com/viewtopic.php?p=5227#p5227

[bassant1]

It shouldn't be necessary to short any pins. There should be a reset button somewhere on the box which you can press. AMLogics USB Burning Tool is a strange program, sometimes things just dont work, maybe try different versions of software.

I tried several times not responding at all.. it can't be recognised.. I tried two or more image files.. tried the two USB ports. the reset button never worked.. I need ur help to short the right pins.. thank you.

[bassant1]

It shouldn't be necessary to short any pins. There should be a reset button somewhere on the box which you can press. AMLogics USB Burning Tool is a strange program, sometimes things just dont work, maybe try different versions of software.

I tried several times not responding at all.. it can't be recognised.. I tried two or more image files.. tried the two USB ports. the reset button never worked.. I need ur help to short the right pins.. thank you.

[Zoemel]

*** Error in mount_flash: mount_common: Could not mount /dev/system ***
### Starting debugging shell... type exit to quit ###
sh: can't access tty; job control turned of

This message is displayed when I restart for libreelec, any solutions?

[sawyer53]

When I connect the device to the adapter, the device does not turn on and remains on the boot screen. When I connect it to a computer via USB, the device turns on directly but the adapter is not connected. I do not want to operate the device via USB, I want to turn it on with the adapter. What could have happened. Suddenly, it happened. I tried that adapter 5W 0.6 Amps had 2 amps in my hand 5W did not turn on with it.


Tapatalk kullanarak iPhone aracılığıyla g?nderildi

[sinisab89]

It shouldn't be necessary to short any pins. There should be a reset button somewhere on the box which you can press. AMLogics USB Burning Tool is a strange program, sometimes things just dont work, maybe try different versions of software.

[bassant1]

Sure. This is an official link where you can download firmware for Tanix TX3 Mini L or H: http://www.tanix-box.com/download-vi...ge-zip-update/
You have to give them your e-mail address and they should send you a download link. You need .img file, (not .zip file), which you will burn to your device with AMLogics USB Burning tool. You've probably downloaded .zip file and that's why you have boot, bootloader, dtb, etc.

my labtop does not recognise my TV box.. I don't know which pins to short.. is there any other way to fix it?

[bassant1]

I finally found the. img file to download.. I will try to install it and hope it works

[bassant1]

Sure. This is an official link where you can download firmware for Tanix TX3 Mini L or H: http://www.tanix-box.com/download-vi...ge-zip-update/
You have to give them your e-mail address and they should send you a download link. You need .img file, (not .zip file), which you will burn to your device with AMLogics USB Burning tool. You've probably downloaded .zip file and that's why you have boot, bootloader, dtb, etc.

yes thank u.. my box is type A not L.. i chose the suitable firmware and they already sent me the link which I used to download the zip file which I extract and got the five images files I told u about.. still need help, please