H96 pro plus bricked ... need Help

[Cju]

H96 pro plus bricked ... need Help

I have purchased a h96pro plus a few days ago and it has blue PCB.S32-V6 (3GB-16GB) (gearbest)
I cant connect to USB Burning Tool 2.0.8 or 2.1.2.
Only blue LED shines.

How can i do Unbrick ?


I'am starting USB Burning Tool, loading original Image and Short circuit 2 connections to the Nand ?
but which two ?

PIN 17 & 18 from right (from left 7 & 8)? are they the right PIN for this Nand ?




sorry for my horrible English

[Cju]

-short PIN 17 and 18
-press Reset button and hold a few seconds
-connect Power

connect USB to USB Burning Tool


it is alive again

but how can I get back to the original ?
without it again bricked ?

now it running/works this ->

http://freaktab.com/forum/tv-player-...7-wifi-chipset

[ch3mn3y]

As original You mean the firmware Your Box came with? Unfortunately there is no firmware for S32-V6. You should be able to flash one for S32-V5, but nobody got hold of one for V6

[Cju]

sorry my english

I can not quite follow you / I understand you correctly how you mean that

with "original" i mean the firmware with the Box came with, mmmm .... yes

this would be the right one ?

aml_7.1_s912_q9377-H96PROPLUS-KDMC_mac-20170619 (gearbest)
aml_7.1_s912_q9377-H96PROPLUS_KDMC_mac-20170826 (gearbest)
Ebox_H96_Pro_+.7.1.2

but if i flash this with "USB Burning Tool" then he writes up to 97%
then I get an error
he does not write the bootloader, Result -> no booting more, no connection to USB Burning Tool







how will i get back from TWRP to original (Firmware) and bootloader

edit: with original i mean Stock Firmware

edit:what do you have on yours ALFAWISE H96 Pro+ 3/32 (S32-V6)

[bouighil]

hi Cju , i've the same probleme, can u please show me the pins 17 and 18 please in the photo?
tnx

[Cju]

see #1 from me, picture 1 make it bigger

(from the left side, PIN 7 and 8)

[bouighil]

didn't work, can't connect to usb burning tool i think that my TV BOX is deaaaad even if the blue light is on :'(

[Cju]

which USB port do you use ?

the left ?

I also try it 20 times

[bouighil]

i've tried all USB ports, without success :s

[Cju]

it is running again with Stock Rom .... aml_7.1_s912_q9377-H96PROPLUS_LP_KDMC_mac-20171010.img

USB Burning Tool behaves strangely
sometimes you need the power supply
sometimes you need the power supply only after the connect

[bouighil]

I shearchshow can i create a boot.ini inorthin to flash the rom with amlogic boot card maker 

[Cju]

@bouighil did you come further?


I have no idea, but how do you want without "BIOS" (uboot) access to USB or SD slot ?
in my opinion that is only possible short PIN's 17/18
One may correct me if I am wrong

[bouighil]

my Tv box is still dead, i'll change the USB cable and see if your method will work

[Cju]

if I remember rightly, that's exactly what I do not know anymore


i power up USB Burning Tool (2.0.9)
loading image -> USB Burning Image button Start/Stop -> Stop !
short PIN 17 and 18
plug in USB male to Box (without power adapter)
I've certainly done that 20 times
then sometime came "connect"
press Start button on USB Burning Tool
plugin power suply

[bouighil]

I'll test that tomorrto after buying a new usb cablec
Thank you very much Cju forfyour support. Anymore i'll report the result tomorrow