Oma's CM10 for PIPO M9 and PIPO M9 PRO Multi Window edition

[jireyes]

screenshot

Are you using the tabletui fix?

I flashed the tablet ui fix after nand format. Should I flash it again?

[spectra9]

I flashed the tablet ui fix after nand format. Should I flash it again?

Screenshot button does not work in tabletui. Just flash back to phablet ui and you should be fine

[scorpio1991]

if just me or everybody have rotation problem? When I set autorotate and hold my tablet horizontal it turn to vertical and when I put to vertical it go to horizontal. I installed it with Riley kernel, and also installed all fixes that I found here but nothing helped. and also autobrightness not working, when I put max brightness I get lowest and when put to lowest I get max brightness

[spectra9]

if just me or everybody have rotation problem? When I set autorotate and hold my tablet horizontal it turn to vertical and when I put to vertical it go to horizontal. I installed it with Riley kernel, and also installed all fixes that I found here but nothing helped. and also autobrightness not working, when I put max brightness I get lowest and when put to lowest I get max brightness

Screen orientation is a known bug in this version. Solution is to use a rotation app (included) or add ro.sf.hwrotation=270 in build.prop (screenshot will be upside down however). No problem with brightness that I can see

[scorpio1991]

Screen orientation is a known bug in this version. Solution is to use a rotation app (included) or add ro.sf.hwrotation=270 in build.prop (screenshot will be upside down however). No problem with brightness that I can see

I cannot find app that I can calibrate gravity sensor. And when I use kernel tuner app and change ro.sf.hwrotation to 270 nothing changed...|

Just needed reboot rotation is fine now, but one thing left is autobrightness and inverse brightness slider :/

[spectra9]

I cannot find app that I can calibrate gravity sensor. And when I use kernel tuner app and change ro.sf.hwrotation to 270 nothing changed...|

Just needed reboot rotation is fine now, but one thing left is autobrightness and inverse brightness slider :/

I don't use auto brightness, but the brightness slider works as it should for me. Sorry can't help you there

[scorpio1991]

Ok, now I have one more problem, when I connect to pc set up on mass storage I dont get message in notification where I can turn on mass storage, so I need use media device set up instead to transfer my files.

[scorpio1991]

I downloaded last pipo official release of august, but how I can take kernel from img file that can I use to install with this rom?

[scorpio1991]

shit I did something wrong, I flashed rom with riley kernel and brightness was still bad and then I tried with other kernel that I found in this topic, replaced on folder and then in rkbachtool deselected everything just left loader and kernel and after flashed I get just camera led shining and screen not showing anything and I cant get to flash mode even with reset and ESC button. what can I do to fix it?

[fztt]

Hi, anyone know whether it's possible to use another kernel besides riley 19a? I prefer 19b...

[Rsly]

it seems it have some problem after flashed.

[whatisit]

shit I did something wrong, I flashed rom with riley kernel and brightness was still bad and then I tried with other kernel that I found in this topic, replaced on folder and then in rkbachtool deselected everything just left loader and kernel and after flashed I get just camera led shining and screen not showing anything and I cant get to flash mode even with reset and ESC button. what can I do to fix it?

Don' worry. You can actually get around this and getting into flash mode. I've done this several times and the M9 pro is essentially brick-proof. The catch is that you need to peel off the white shell on the sides/back of the tablet. You don't even need any tools, as I've done it several times purely by hand now.

To peel it off, hold it screen-side up and put both arms under it with your fingers curled around and just barely touching the top of the screen (sort of where the camera is, but on the left and right sides of it). Now just pull the outer white plastic away/down. You can use your thumbs for better leverage. The corners you have to work a little harder at, but it's possible. Don't try to rip anything too hard. If it's creating an opening, you're doing the right thing. If not...you're not and keep playing with it.

Once you peel it off enough, look near the top (by the cameras) inside the case and underneath the phono jack. There is a small metal button inside the case. If you carefully press it with a screw driver or something, it discharges a capacitor or something and forces the unit to shut down. You can then hold power and esc buttons together to start up and go into flash mode. From there, re-flash everything.

I've tried the reset method with sticking a paperclip in the tiny hole and doing the sequence of pressing certain buttons and holding for 10 secs each... it didn't work. That's how I figured out about this button. I thought it was bricked and figured I'd take it apart to look for another solution. Hope it helps!

[whatisit]

Anyone figure out the deal with wifi not working? I have the same issue mentioned a page or two earlier, and it makes Oma's rom unusable for the M9 Pro. All the extra settings are nice though, so I'm wishing I could continue using.

[user_]

port to pipo m6 pro 3g

Hallo!
Can you it port to pipo m6 pro 3g?