[HELP] H96 Pro plus 3Go Rom 16GB S912 / CZ-S32-V6 [SOLVED]

[dada06200]

hi ,

i need help , i can't firmware my box tv (H96 Pro plus 3Go Rom 16GB S912 / CZ-S32-V6) ,i tried with usb burning tool 2.08 +aml_7.1_s912_q9377-H96PROPLUS_KDMC_mac-20170809 , i receive an error message on usb burning tool at 2% :

[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error.

Can you help me please ?



(sorry for my english ,it's no good)

[ch3mn3y]

Push reset button right after that error is shown.

Sometimes after 2nd, sometimes after 3rd or 4th time it should flash.

[dada06200]

ok , i go to try

[dada06200]

it's don't working

[ch3mn3y]

Not even after 4-5 try? Are You sure Youy are using right firmware for Your variant of H96 Pro+? S32-V5/V6 are newer Boxes and they came few month after 2017.08.09, so it may be firmware for the wrong variant (like S32-V2.2/V3 or even other)...

[dada06200]

yes, after 4-5 times it did not work , i did not found a firmware on the net to H96 Pro S32-v6, i want to change de firmware because when I plug on the tv, there is no picture and the blue led on the box remains lit

[ch3mn3y]

As far as I know there is no image for S32-V6. However one made for S32-V5 are working fine with V6.
https://mega.nz/#F!8qhRRaYJ!2ZA3VLjv...TF27g!prxFnCRA

[dada06200]

thanks ,I'm going to try

[dada06200]

don't working too ...
I put the report to USB BURNING TOOL

[ch3mn3y]

This zip file is invalid.

[dada06200]

i put the report

[ch3mn3y]

Try pushing reset for the whole time the app is working. Check it at least two times, as first one mostly goes wrong.

[dada06200]

same problem, don't working ...i want cry

[dada06200]

I solved my problem:

-It is necessary to launch usb burning tool
-choose your rom (for me , it's : aml_7.1.2_s912_q9377-H96PROPLUS_LP_mac-20171010.7z)
-Then connect the power supply and usb at the same time
-Press the reset button (he will be in uboot)
-then press "start"
and wait finish

[marcoscinzento]

I solved my problem:

-It is necessary to launch usb burning tool
-choose your rom (for me , it's : aml_7.1.2_s912_q9377-H96PROPLUS_LP_mac-20171010.7z)
-Then connect the power supply and usb at the same time
-Press the reset button (he will be in uboot)
-then press "start"
and wait finish

Could you post the rom link please, I did not find it on the forum.