Brick my MXQ PRO 4K

[bubunero]

Dear all.
Sorry this my first time I'm write but I'm non find any solution in side of other post and also on web....

my model of the PCB is 905mxq_20160524_v1.2. WIFI is RTL8189 Realtek.

Do you know , with firmware I'm can install with this board?

Last Firmware I'm try is MXQ-PRO_ENT.img

with t UBS_Burning_tools but fail after 9% with this this errore message: [0x30405002]UBOOT/Partition boot/Verify patition/USB Control setup error

This is last part of LOG:
[11:32:19 035][HUB3-1][Inf]-------------Download boot.PARTITION-----------
[11:32:19 035][HUB3-1][Inf]--0-7-0-16
[11:32:19 035][HUB3-1][Inf]--download store boot normal 10025444
[11:32:19 035][HUB3-1][Inf]--Send download command success
[11:32:19 051][HUB3-1][Inf]--Read command status success
[11:32:21 285][HUB3-1][Inf]--Transfer complete
[11:32:21 285][HUB3-1][Inf]--Send download get_status command succeed
[11:32:21 285][HUB3-1][Inf]--get_status success
[11:32:21 285][HUB3-1][Inf]--verify sha1sum 89da8313b50dda0109e424acf8b75fec19017ff2
[11:32:21 285][HUB3-1][Inf]--Send verify cmd succeed
[11:32:21 723][HUB3-1][Err]--usbReadFile len=512, ret=-5 error_msg=libusb0-dll:err [_usb_abort_ep] could not abort ep 0x81, win error: Impossibile trovare il file specificato.
[11:32:21 723][HUB3-1][Inf]--Failure : 1, FailureMax : 3
[11:32:22 235][HUB3-1][Err]--[11:32:22 235][HUB3-1][Inf]--Failure : 2, FailureMax : 3
[11:32:22 747][HUB3-1][Err]--[11:32:22 747][HUB3-1][Inf]--Failure : 3, FailureMax : 3
[11:32:22 858][HUB3-1][Err]--[0x30405002]UBOOT/Partition boot/Verify patition/USB Control setup error
[11:32:22 859][HUB3-1][Inf]--Close device handle 0x00000838


Sorry for my bad English
Daniele