If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
H96 Pro Plus v6 WeChip with no HDMI video. Bricked?
H96 Pro Plus v6 WeChip with no HDMI video. Bricked?
**SOLVED** Jump to Post 45
I had a working, rooted 7.1.2 android rom running but I tried to flash another because I can’t be happy with a working system I guess. Something went wrong and now I have no video output. I assume it’s bricked or very Ill (possibly recoverable). Blue lights still come on.
Ive tried several ways to flash recovery but no video so I have no idea what’s happening. If anything.
I may have selected to "erase bootloader" in Burn Card Maker, as it is selected by default. Does that mean it's toast? If so there should be an "ARE YOU CERTAIN" option in red lettering and it should be unselected by default.
I'm seeing a lot of info on serial console (via USB I assume), but not found much on how to connect.
Then there's the wooden toothpick or pin-short method - how do you know if you can do that? What is the prerequisite condition?
My box is a blue pcb, s912, v6 H96 Pro Plus 3GB 32GB
So first time using the USB cable vs using an sdcard introduces a problem.
With the usb cable plugged in the box powers up. But the instructions for the USB burning tool indicate power off>press and hold reset>power on. I’ve also read that the USB-supplied power may be insufficient for a burn so I think I may need external power.
How is this done in this case - hold reset>plug power>plug USB?
Since I turned my device into a half-brick, I accidentally stitched 2GB firmware for 1GB device, nothing worked and could not even enter the emergency (holding the button in the av slot).
Although all the previous times, I easily restored it using this method: I turned off the prefix, inserted sd stitched and with 3 files, inserted a toothpick and cut off the power, there was an image of the robot and was updated from the sd card. After repeated attempts to revitalize the device, that will have to be revived only surgically ...
He brought the prefix to work, dismantled and began to read the information, kindly provided by comrades in the branch. At work, I did not have an HDMI tv or a monitor,
but this fortunately did not stop me ...
What was done?
PLAN A
Disassembled:
The device, removing the rubber feet and unscrewing the 4 screws.
He put the board in front of him, so that the memory was as close as possible.
Connected:
USB cable to the PC, and a USB just inserted into the connector, but not until the end so that the console does not start.
Running:
Amlogic USB Burning Tool as administrator!
We close 2 tracks: see on foto
We connect USB, we keep two closed tracks.
Once the device appears in the Amlogic USB Burning Tool, release the closed tracks.
Next File-> import image
Choose our image in the saved folder aml_upgrade_package.img
Select All Force Erase
Click START
We are waiting for the end of the firmware.
After successful firmware we press Stop, we disconnect everything neatly.
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
Install firmware with a microSD card STEP 1 (download and extract).
Download : Burn Card Makerand firmware
Extract "TF.rar" and firmware in the same folder.
Now you get "Burn_Card_Maker.exe" and firmware file.
Rename le firmware update.img
Put a microSD card in your computer (on Windows) and go to the second step.
STEP 2 ("make" the microSD card)
Run "Burn_Car_Maker.exe"
The first time it's in chinese, click on the top lef menu, click on the second option, check "English" and put "OK".
Close and restart "Burn_Car_Maker.exe"
Chose disk: (Letter of your microSD card)
"YES" must be check 3 times for "To Partition and Format", "erase_flash" and "Reboot" (erase_bootloader must be uncheck).
Click on "Open" and chose firmware img.
Click on "Make", format the microSD card (default settings), after that the rom copy begin on the microSD card, when it's done you get a "Success" message.
STEP 3 (installation)
Now, insert the microSD card in the device (power supply unplug/off).
Let your TV on and the HDMI cable plugged.
With a paper clip or other, press the reset button and hold it (small hole under the box), in the same time plug the power supply on the Beelink GT1.
See this for more info http://chinagadgetsreviews.blogspot.ro/2015/04/how-to-unbrick-any-amlogic-devices.htmlFor how I managed to unbrick Rikomagic V5 TV Sti...
You may only view thumbnails in this gallery.
This gallery has 1 photos.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment