Help me, Wait for loader fail.

[deivisonpsy]

I have two TV boxes with this defect, the firmware is correct and the program also, I already performed the maskrom more anyway, do not leave this message, thanks to who can help
me. !!!

DEVICE : MxQ - XT-MX4N-V20 - Plataform 3229.

[gefattern]

I have two TV boxes with this defect, the firmware is correct and the program also, I already performed the maskrom more anyway, do not leave this message, thanks to who can help me. !!!

Hi ,

i think your Box can only use a Rom with the same Loader , do you know what Loader was used in

Stockrom ??? please give more Info about Box , Name CPU GPU Wifichip ,

other Users had this Problem too , try to get the orginal Rom from Seller ,

good luck / gefattern

[deivisonpsy]

Hi ,

i think your Box can only use a Rom with the same Loader , do you know what Loader was used in

Stockrom ??? please give more Info about Box , Name CPU GPU Wifichip ,

other Users had this Problem too , try to get the orginal Rom from Seller ,

good luck / gefattern

Hi, I edited the information, now I put on the board that is happening this error.

[gefattern]

Hi, I edited the information, now I put on the board that is happening this error.

Hi ,

there where several other Users that had similar Problems , i think your Box can only use

one special LoaderVersion , examlpe : 2.17 / , what Wifichip does your Box use & what FW

Version was the installed Stockrom ??? is it a 1/8 Box or 2/16 Box ???

greetings / gefattern

[deivisonpsy]

Hi Version was the installed Stockrom and 1-8 and the Wi-Fi, Sv6051p I had another tv box of the same card used the same firmware in it and could install the system, but in this is happening this error will be a mistake on the nand chip? or something. thank you

[gefattern]

Hi Version was the installed Stockrom and 1-8 and the Wi-Fi, Sv6051p I had another tv box of the same card used the same firmware in it and could install the system, but in this is happening this error will be a mistake on the nand chip? or something. thank you

Hi ,


please explain it better , you mean installed was latest Android 8.1Oreo , or what ??? , and then

u took the Rom of similar Box & it worked again , or what ???

greetings / gefattern

[deivisonpsy]

Hi ,


please explain it better , you mean installed was latest Android 8.1Oreo , or what ??? , and then

u took the Rom of similar Box & it worked again , or what ???

greetings / gefattern

Hi I had another tv box of this and the firmware that I used and the same one that I tried put in the one that this one with more error did not work, then I think that firmware is not.

[Bnt007]

It´s happening the same to me!

I bought alfawise A8 in gearbest. I only use it one time and then it bricked!

Even doing the 5 and 6 pin in nan chip(Samsung 629 kmvyl000lm-b503) the firmware update stops here(see image attached)loader failed!!.

I asked alfawise support for the Rom with the same Loader but they do not answer me.

Can you guys help me?

There is also some guys that can unbrick this rk3229 mx4 boards and others, letting the 5 and 6 pin in place till it ends the firmware update and they can achieve it to conclude:

https://youtu.be/7pbs6QyCQYM

In my case it steps foward the download idb fail but it fails loading...

Mine also does not acept other versions of rk3229 imgs and only mx4 rk3229 imgs....i only have two versions(firmware) that procede to this point, all the others do not even boot....

I also tried diferent usb cables(type A) and windows(10 and xp), as also diderent batch tools and drivers but nothing happens! maybe it is another circuit procedure and not only the 5 and 6 pin contact!

HELP!!!

[deivisonpsy]

It´s happening the same to me!

I bought alfawise A8 in gearbest. I only use it one time and then it bricked!

Even doing the 5 and 6 pin in nan chip(Samsung 629 kmvyl000lm-b503) the firmware update stops here(see image attached)loader failed!!.

I asked alfawise support for the Rom with the same Loader but they do not answer me.

Can you guys help me?

There is also some guys that can unbrick this rk3229 mx4 boards and others, letting the 5 and 6 pin in place till it ends the firmware update and they can achieve it to conclude:

https://youtu.be/7pbs6QyCQYM

In my case it steps foward the download idb fail but it fails loading...

Mine also does not acept other versions of rk3229 imgs and only mx4 rk3229 imgs....i only have two versions(firmware) that procede to this point, all the others do not even boot....

I also tried diferent usb cables(type A) and windows(10 and xp), as also diderent batch tools and drivers but nothing happens! maybe it is another circuit procedure and not only the 5 and 6 pin contact!

HELP!!!

Ok I'll try !!!