Does Anyone Know How to Use the USB Burning Tool?

[Cybergy]

Ok thanks

[Shipwreck]

Shipwreck:
Uninstall the USB Burning Tool, then plug in the android box /power adapter and hdmi/ and then install.
The USB Burning Tool installs the driver for your box.

Thanks Gante. I didn't install the burning tool. It was in a zip file and everything just unzipped into the Burning tool folder. However, there is a folder in the Burning tool folder called "WorldCup_Device" and in that folder is "InstallDriver.exe". Is this what you are referring to?

[Gante]

Yes, but it should be installed together with the USB Burning Tool.
Android box must be connected to recognize it during installation.

[Cybergy]

Gante I decided to try the burning tool on the working box this morning. I used one of the images you recommended yesterday (aml_7.1.2_s912_q9377-H96PROPLUS_LP_mac-20171129.img)

It did work.

So I assume that the other (bricked) box may need a pin-short or something more extreme to get it to accept a new rom and boot.

Anyway, thought I should let you know.

[Gante]

If the box connects to the usb burning tool, no pin-short is required, but you have to choose the corrent correct firmware.
On one android box that I did was working from 20 firmware just one. It probably depends on the configuration of the box. He wants to try it.

[Cybergy]

The 2 boxes I have appear to be identical. Same board, same markings, same date. The rom you suggested only worked on one of the boxes. The other box is still dead.