X96 MAX TV Box BLACK 4/64GB Amlogic S905X2, Android 8.1, Dual WiFi, Gig Lan,USB3.0, BT4.0

[trebor]

They may not even be aware of the Enter Issue, most never do fix.
Only Devs with Customs Roms.

[Venusflytrap]

I found that when I tried to install SuperSu, it bricked it. So be forewarned. I had to reinstall the firmware.

[Venusflytrap]

My Logitech K400+ keyboard didn't work properly on the X96 Max. The enter key didn't work as it inserted the letter "Q" instead. I had to use the External Keyboard Helper Pro app to make it work properly. You'd think they'd fix this keyboard problem before shipping out these units, but no....

[trebor]

To Continue:
On with more show and tell
X96 MAX TV Box BLACK 4/64GB Amlogic S905X2, Android 8.1, Dual WiFi, Gig Lan,USB3.0, BT4.0

As previous Good Startup
Set up with Wizard Wifi and Google easy, but i think one of the OTA removed it
When is ATV not ATV when it's whatever this UI is Called, Interesting as will be seen.

Shows all apps has an App Draw and you can Add apps to a custom area...Not sure about all that.

As Mentioned 2 OTA updates so far since switch on, so support appears to be ongoing.

have Updated a couple apps and installed testers etc. Google store all good
Has Root access, No SU, also no Upper or Lower Bars.

Remote working good, and Using Logitech k400 also. except Enter/Q thingy
Clock on the Front Good looking deep blue colour, like it.

Lets run it thru some paces and see what it has to offer.

Boot Animation

UI, Installed Apps and Info.




Started with Firmware:




Then


Now on Dec 24th OTA

[trebor]

Better Late than Never they say:

Keeping on the same theme as Earlier this day or was it yesterday.
Thanks to Gearbest we can have a closer look

X96 MAX TV Box BLACK 4/64GB Amlogic S905X2, Android 8.1, Dual WiFi, Gig Lan,USB3.0, BT4.0

Tested a few of these 905x2 and so far showing some good signs, a few quirks, but all in good time,
This Unit as I switched on today, has already had two OTA updates, good to see some support happening for this unit

Lets have look at what we have for your Viewing Pleasure:

The Box:



What's is the box:


Ports:

Oops there goes the warranty


Remove the Base:




Display


More to Come

Gearbest

[uscool]

System runs well on the x96 max 4/32. Both Wlan and GBit Ethernet running fine.
In droid-settings the entries for CEC and frame-rate-switching control disappeared.

TMM

Hi wonder if it will work for the 2gb - 16gb version ? also does the front display still work ?

Thanks

That's true on the GT1 Mini as well. Not sure why Beelink decided to do that.

[tmm]

Hi, just wondering if you can flash this on the x96 max uses the same Amlogic u211 reference board , I have ordered the 2gb-16gb version

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s905x2/firmware-roms-tools-do/757062-rom-beelink-gt1-mini-tvstock-nexus-rom-android-tv-8-1

Thanks

System runs well on the x96 max 4/32. Both Wlan and GBit Ethernet running fine.
In droid-settings the entries for CEC and frame-rate-switching control disappeared.

TMM

[uscool]

Hi, just wondering if you can flash this on the x96 max uses the same Amlogic u211 reference board , I have ordered the 2gb-16gb version

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s905x2/firmware-roms-tools-do/757062-rom-beelink-gt1-mini-tvstock-nexus-rom-android-tv-8-1

Thanks

[romcrazy]

I don't :-)

The box should be a replacement for my old box which is not able to play h265.
I use it in my home cinema. Just for Kodi playing Isos from my NAS.

In my living room, where i don't see the "Big Pictures" i use a unmodified Nvidia Shield (2015, 16GB). This box stream well Amazon, Netflix and others.
After new updates, the Shield is not usable for weeks till Nvidia has fixed all the new failures brought by the update.

From the new box in the home cinema i require just HD-Audio Passthrough and frame rate switching. That's it.
This is why i like Core/Libre Elec. Just enough system to run Kodi.

Sorry for being off topic. :-)

PMed you

[tmm]

You dont use it to stream stuff? or iptv?

I don't :-)

The box should be a replacement for my old box which is not able to play h265.
I use it in my home cinema. Just for Kodi playing Isos from my NAS.

In my living room, where i don't see the "Big Pictures" i use a unmodified Nvidia Shield (2015, 16GB). This box stream well Amazon, Netflix and others.
After new updates, the Shield is not usable for weeks till Nvidia has fixed all the new failures brought by the update.

From the new box in the home cinema i require just HD-Audio Passthrough and frame rate switching. That's it.
This is why i like Core/Libre Elec. Just enough system to run Kodi.

Sorry for being off topic. :-)

[romcrazy]

Regards early adopers :-)

I bought this box in the hope, that in one year or so, that Core/Libre Elec will be available for S905X2 devices.
Until then, I wanted to use Kodi Leia on Android.

Now I'm shocked that neither HD-Soundtracks like Atmos or DTS-X nor the framerate adaption works.
I have tried some images including the Magendanz Beelink GT1 Mini Stock & Nano Nexus ROM (Android 8.1) from today. Tnx Magendanz!
All versions are 32 bit compiled systems with missing a lot of things like IEC passthrough, CEC, framerate adaption ...

My very old mede8er box based on a Realtek RTD1186 chipset did this ages ago. This boxes are older then the HD audio formats but they are able to pass through even this.

Whatever, it seems i have to wait until Core/Libre Elec supports S905X2 devices.

In the meantime, I have installed Pyload, Samba and NFS-Sever via Entware on it.
With Gbit Ethernet and the USB3 port this box is a good download and NAS station. I have measured transfer rates of 55 MB/s back and forth.

TMM

You dont use it to stream stuff? or iptv?

[Xannytech]

Regards early adopers :-)

I bought this box in the hope, that in one year or so, that Core/Libre Elec will be available for S905X2 devices.
Until then, I wanted to use Kodi Leia on Android.

Now I'm shocked that neither HD-Soundtracks like Atmos or DTS-X nor the framerate adaption works.
I have tried some images including the Magendanz Beelink GT1 Mini Stock & Nano Nexus ROM (Android 8.1) from today. Tnx Magendanz!
All versions are 32 bit compiled systems with missing a lot of things like IEC passthrough, CEC, framerate adaption ...

My very old mede8er box based on a Realtek RTD1186 chipset did this ages ago. This boxes are older then the HD audio formats but they are able to pass through even this.

Whatever, it seems i have to wait until Core/Libre Elec supports S905X2 devices.

In the meantime, I have installed Pyload, Samba and NFS-Sever via Entware on it.
With Gbit Ethernet and the USB3 port this box is a good download and NAS station. I have measured transfer rates of 55 MB/s back and forth.

TMM

Dunno about DTS-x, but CEC, framerate adaption works you have just to click on on droidsettings app. anyway test my rom and let me know. later on i'll open a proper thread, i'm just waiting to complete a not public work on a different device.

[tmm]

Regards early adopers :-)

I bought this box in the hope, that in one year or so, that Core/Libre Elec will be available for S905X2 devices.
Until then, I wanted to use Kodi Leia on Android.

Now I'm shocked that neither HD-Soundtracks like Atmos or DTS-X nor the framerate adaption works.
I have tried some images including the Magendanz Beelink GT1 Mini Stock & Nano Nexus ROM (Android 8.1) from today. Tnx Magendanz!
All versions are 32 bit compiled systems with missing a lot of things like IEC passthrough, CEC, framerate adaption ...

My very old mede8er box based on a Realtek RTD1186 chipset did this ages ago. This boxes are older then the HD audio formats but they are able to pass through even this.

Whatever, it seems i have to wait until Core/Libre Elec supports S905X2 devices.

In the meantime, I have installed Pyload, Samba and NFS-Sever via Entware on it.
With Gbit Ethernet and the USB3 port this box is a good download and NAS station. I have measured transfer rates of 55 MB/s back and forth.

TMM

[Xannytech]

Well folks I bought the max x96 and I have a problem with the ethernet input ... That is because the Wi-Fi box loads everything (including streams), if you connect it by cable it loads me the videos on YouTube but it does not load streams at all ... It does not open my iptv list and in kodi it takes to load any movie ... I already installed the last update and the problem continues ... I test the internet and give the maximum values ... I can download applications at maximum speed ... The problem is only in streams ... List iptv and kodi ... Can someone help me with how to solve this bug?

Could be a driver issue (like a driver setting) or a kernel problem, i saw nothing particularly different from s905x device regarding ethernet, in kernel stuffs but i found the ethernet port a little bit tricky.
Anyway test my rom (https://forum.freaktab.com/forum/tv-...568#post755568) to see if the problem is in drivers (i used different drivers).
Anyway to colelct data and understand if we can solve it try to connect thru adb and look in logcat during streaming if some error or problem comes out : "logcat -v color | grep eth" or without "| grep eth" to get the full logcat