remote config (please yhelp

[krappa]

Hello guys. I have a M


Using this ROM: MXQ PRO 4K - p201 - android TV (ATV) - by cOOLio

My problem is my remote that comes with the box doesn't work.
I did manage to backup my stock rom/original remote config file and it somewhat works. The volume up and down don't work, the Enter/OK button in the middle doesn't work, the back and home doesn't work.
Through trial and error I did find the enter/ok button and the back button which is #5 on my remote for some reason.
My original stock rom is NEXBOX 5.1.1 MXQ PRO 4K.

I will provide some files now.

My original remote.cfg

#*********************************************************************************************************
#this file is configuration for each factory remote device
#     work_mode      0 :software mode  1 :hardware mode 
#    repeat_enable      0 :disable repeat 1 :enable repeat    
#
#    factory_code      each device has it's unique factory code. 
#              pattern:custom_code(16bit)+index_code(16bit)
#              examble: 0xff000001 = 0xff00(custom cod)  0001 (index)
#
#    release_delay      unit:ms.release will report from kernel to user layer after this period of time
#              from press or repeat triggered. 
#
#    debug_enable      0 :debug disable  1 :debug disable
#
# SW MODE:
#    bit_count      how many bits in each frame      
#    tw_leader_act      time window for leader active 
#    tw_bit0          time window for bit0 time.
#    tw_bit1          time window for bit1 time
#    tw_repeat_leader  time window for repeat leader
# REG
#    reg_base_gen      set value for PREG_IR_DEC_BASE_GEN    
#     reg_control      set value for PREG_IR_DEC_CONTROL
#    reg_leader_act      set value for PREG_IR_DEC_LEADER_ACTIVE
#    reg_leader_idle      set value for PREG_IR_DEC_LEADER_IDLE
#    reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
#    reg_bit0_time      set value for PREG_IR_DEC_BIT0_TIME
#************************************************************************************************************* 
#amlogic NEC remote
factory_infcode = 1
factory_code    = 0xfe010001 
work_mode          = 0
repeat_enable = 1
repeat_delay = 40
repeat_peroid = 39
release_delay    =    121
debug_enable     = 0

fn_key_scancode    = 0x00
left_key_scancode  = 0x51
right_key_scancode = 0x50
up_key_scancode    = 0x16
down_key_scancode  = 0x1a
ok_key_scancode    = 0x13
pageup_key_scancode = 0x04
pagedown_key_scancode = 0x1b

mouse_begin
        0 0x51
        1 0x50
        2 0x16
        3 0x1a
mouse_end

key_begin
        0x41 113
    0x10 114
    0x18 115
    0x51 105
        0x16 103
        0x50 106
        0x1a 108
    0x13 97
    0x19 158 
    0x11 172
    0x40 116
    0x4c 139
        0x4e 2
        0x0d 3
        0x0c 4
        0x4a 5
        0x09 6
        0x08 7
        0x46 8
        0x05 9
        0x04 10
    0x01 11
        0x42 14
        0x0f 392
    0x43 141  
key_end
repeat_key_begin
        0x41 113
    0x10 114
    0x18 115
    0x51 105
        0x16 103
        0x50 106
        0x1a 108
    0x13 97
    0x19 158 
    0x11 172
    0x40 116
    0x4c 139
        0x4e 2
        0x0d 3
        0x0c 4
        0x4a 5
        0x09 6
        0x08 7
        0x46 8
        0x05 9
        0x04 10
    0x01 11
        0x42 14
        0x0f 392
    0x43 141  
repeat_key_end

now here are the two values I found:

0x05 15 #Enter #oldback

0x54 6   #Back #oldNo.5

I would appreciate any help.