[ROM] RedPoisonATV S912 STABLE NEW VERSION V2

[minixfreak]

...................

Try s912 version

[islandfever]

There are 3 different versions of S912 firmware in the folder. Does any of them work on boxes with DDR4 Ram?

...................

[Tronsmart CX]

RedPoisonATV Is officially here !!!!!!!!!!!!!

There are 3 different versions of S912 firmware in the folder. Does any of them work on boxes with DDR4 Ram?

[islandfever]

You shouldnt burn non lpddr version. It will brick lpddr boxes.

if you read through this short thread, the op has not updated with a new lpddr firmware. It will be some time this week or so.

Have I ruined my device?

I did read this and it "seemed" like he had posted a LPDDR which is in the file area...

Can I go back to old firmware?

[X92-2GB]

You shouldnt burn non lpddr version. It will brick lpddr boxes.

if you read through this short thread, the op has not updated with a new lpddr firmware. It will be some time this week or so.

[islandfever]

I flashed the T95Z img with Burning tool successfully but it wont boot....bricked..the LPDDR version doesnt burn it gives me an error....what am I doing wrong?

[ZeroZorro]

Please don't cross post

Just FYI...I burned RedPoisonATV-T95Z.image to SDcard with SDCard Image Maker, pushed the button in AVhole of my T95Zplus (2/16) and powered device on. It just flashed RedPoisonATV firmware and replaced ATVXperience ROM.
No problems detected yet, I just let it boot up, finished setup and rebooted again. Apart from basic file manager, terminal and speednet test no additional software afaik.
Started with IPTV software and works like a charm on a really terrible data connection (28k8, yes, still exists).

Good work! Testing still in progress of course

[islandfever]

Please don't cross post

huh? I only posted this here in one thread?

[islandfever]

Confused about the difference between T95z 4DDR and 3DDR....is the LPDDR3 an older pre-2017 version (I saw someone request an LPDDR3 version of this ROM)?

How do I know which IMG file to use with my T95Z? the T95Z one? or the newer LPDDR version you built for the T95Z DDR3 request....

[ZeroZorro]

Are there install instructions for this? Currently I am on the old Poison 4.3 with a T95z Plus 3/32

Is this Android TV? or just regular Android N

Please don't cross post

[islandfever]

Are there install instructions for this? Currently I am on the old Poison 4.3 with a T95z Plus 3/32

Is this Android TV? or just regular Android N

[Zak.ns]

Not working on T95Z plus 3/32gb LPDDR3, flash is ok but after boot screen goes black!

[chenzen666]

Does this work on the T95Z plus 2/16Gb ?

[minixfreak]

I could be mistaken, the IC's are k4b2g0446c, which from a quick google search shows DDR3, but it may be LPDDR3? I was able to get H96 Pro SCV1 from Superceleron to boot, but no wifi of course. If I try using Ricky's 4.0 or 5.5 and copy the wifi to the SCV1 firmware, it repacks but still doesn't work. If I copy the app / fonts / framework / media / preinstall / priv-app folders from SCV1 or ATVx and repack factory image, it get's stuck on the "Checking for Updates". I will try with v6 as soon as I receive it, as I did read somewhere that someone else had the same issue trying to use 5.5 to repack ATV images.

Use v4.0.0 only

[loganparker]

It is in the H96 pro thread firmware... bottom part of list is newest custom firmwares. Z1 is thr only atv in ota form. It is based on Z1 08/18 release, so the port is not fully tested on H96 pro boards.

you will have to look at the thread its linked to, as it has more info. Oh i thought your board was a V6.1, which is LPDDR, but with a different boot loader.

not sure if it will work, because nobody has stated thry tested it on the older black boads.

if your getting the tools, then it csn be done customized to your board. Thee is info on doing so within the thread, as it is a base for all to use through Rickys tool.

I could be mistaken, the IC's are k4b2g0446c, which from a quick google search shows DDR3, but it may be LPDDR3? I was able to get H96 Pro SCV1 from Superceleron to boot, but no wifi of course. If I try using Ricky's 4.0 or 5.5 and copy the wifi to the SCV1 firmware, it repacks but still doesn't work. If I copy the app / fonts / framework / media / preinstall / priv-app folders from SCV1 or ATVx and repack factory image, it get's stuck on the "Checking for Updates". I will try with v6 as soon as I receive it, as I did read somewhere that someone else had the same issue trying to use 5.5 to repack ATV images.