[ROM] RedPoisonATV S912 STABLE NEW VERSION V2

[m8spro07]

[QUOTE=X92-2GB;n761529]

Seems like you removed the LPDDR firmware, in the updated versions. Though the versions still are pre Feburary on the files. I was in the assumption by the last notice, the updated firmwares would be done over the weekend, and the dates would reflect a later time stamp than what is shown on mega site.

M8SPRO S912 3/32 DDR4 New software ??

[soldiaz]

Did you erase bootloader?

I ask since minixfreak Stated anywhere that he was going to create an lpddr rom.

I own a TX92 3/32 lpddr. V2 is based on Tanix (see 1st post)....so I wonder....shall I flash and maybe brick or stay on stock

[xmannamviet]

I tried with power adapter and Normal erase. Same error. Error at 98%

Its a stock ROM on the box. Should I do something before flashing, or copy some files on?

My box is model T95Z Plus LPDDR3 3GB, rom 32GB and everything work perfect, i don't known model your box ???

[Mitcho]

do you stick: Normal erase and plug power adapter when flash rom

I tried with power adapter and Normal erase. Same error. Error at 98%

Its a stock ROM on the box. Should I do something before flashing, or copy some files on?

[xmannamviet]

I tried 3 times. What are my options?

Thanx, Mitcho

do you stick: Normal erase and plug power adapter when flash rom

[Mitcho]

Do you try again??? Everything work for me

I tried 3 times. What are my options?

Thanx, Mitcho

[xmannamviet]

Hi,

It came to 98% - verify partition, error result.

Thanx, Mitcho

Do you try again??? Everything work for me

[Mitcho]

REDPoison_V2_T95Z_LPDDR3_Test link: ..... upload comming soon, wait for me.
Everything and patch clock work well
Here: https://mega.nz/#!hdEEVaCA!gdBQiQd1r...5G1xT2YuxhmFQ8

Hi,

It came to 98% - verify partition, error result.

Thanx, Mitcho

[xmannamviet]

REDPoison_V2_T95Z_LPDDR3_Test link: ..... upload comming soon, wait for me.
Everything and patch clock work well
Here: https://mega.nz/#!hdEEVaCA!gdBQiQd1r...5G1xT2YuxhmFQ8

[Ico]

minixfreak VFD patches are those I publish in AtvXperiance for version 2H. Unfortunately it does not work at your version 2 at least for my T95U. I suppose that it does not work for other devices. I have working patch for T95U but unfortunately there is a problem to attache a file here. Later will try again to upload the patch here.

P.S It works now!
T95U_Pro_Clock_Display_RedPoison.zip

[soldiaz]

LP = LPDDR

If I keep original LPDDR bootloader and just flash system, what about this then?

[Mitcho]

Maybe u have lpddr memory which I have to make a version for it still

Do you have any plan soon?

But I believe that it is not lpddr board, I found this pic on xda forum and there is said that this is LP board. I wouldnt know!
Thanx

[chenzen666]

First installed UHD Netflix apk I kept from previous installation.

After that I downloaded Netflix from apkmirror and flashed it on top of that and works just fine....

(6.26.0 build 13 31685 beta)

thanks that is what i hav done and it works thank you

[minixfreak]

Hi,
Ihave tried upgrade stock 1076 with V2 firmware of my T95Z plus box 3gb/32 (q201), but it just error at 2%. What are my options. I tried through USB A-A cabel and USB Burning tool.

Thnx, Mitcho

PS. I ve also tried all other versions Zoomtak, Sunvel and Nexbox. All same at 2%.

Maybe u have lpddr memory which I have to make a version for it still

[Mitcho]

Hi,
Ihave tried upgrade stock 1076 with V2 firmware of my T95Z plus box 3gb/32 (q201), but it just error at 2%. What are my options. I tried through USB A-A cabel and USB Burning tool.

Thnx, Mitcho

PS. I ve also tried all other versions Zoomtak, Sunvel and Nexbox. All same at 2%.