Bricked H96pro+ - no pin to reset NAND

[Thomasqqq]

Hi All,

I just tried to update my H96Pro+ with a new firmware, and for some reason i forgot to erase Bootloader, and now it wont boot, Booting tool cant find the device, and Burn card maker, dont trigger any recovery when i try to restore it from SD card.

i have read alot of forum, and seen alot of videos of how to reset the NAND, but i cant find this on my board (ZH01-S912(LPDDR3)-TV BOX-V1.0). Anyone who can point me in the right direction?

I added 2 pictures (front and back).,

Hope someone out there can help me out.

[ReaperMan]

My bad, gave wrong info.

[Thomasqqq]

Hi ReaperMan, Thanks for trying.

Anyone ells has any suggestions? I tried the pins near the SDcard slot, but it do not seems to trigger the bootloader.

[ReaperMan]

Yeah, same (wrong info)...from the NAND chip..can you see embedded trace circuits? (Can't tell from your small picture)

You may have read already, but still a good "Un-Brick" link.

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s912/645787-h96-pro-plus-short-pin-unbrick-help

[ReaperMan]

Have you tried contacting the vendor,even if product is older(newer LPDDR3)?
Explain software update went wrong and can they forward from the manufacture the "reset pin" location...worth a try.

[ReaperMan]

Also ask for the newest (original) firmware for your China Box. If I understood... you would require Wisdom firmware, and for the LPDDR memory. There are not many(2?) Wisdom firmwares but non available that are LPDDR.