(ROM) Minixfreak_OS S912 May25/2019 ""NEW""

[antonio6o6]

See attached photo, I don't think anything like that came with my box, presumably that's if you have the optional A2 remote?

Here is the remote configuration file for you Minix u9h. If you using mini freak firmware this is the one you need if you got the Minix u9h only copy and paste reboot the box. and you'll be good to go. My box u9 h Minix it's working great with that remote file I managed to turn on and off the Box use mouse key keyboard and I using a3 remote and remember you have to use C drive USB cable that came with the Box then you have to put the Bluetooth USB remote control in the sea drive to USB cable

https://mega.nz/#!dJwj0SpK!Mkpi9U6IK...OXbGngLd_Bwo6M

[Scotdog]

Hi, same box. Did your remote work ok? I can't get past select language screen as the key mapping is off, power button is volume up for example and only a few keys work

Hi fungusfeet none of my Minix U9h remotes would work. (A2/A3) Not even my Rii mini keyboard that works on all of my boxes. Strangely, My H96 Pro remote works flawlessly with my Minix U9h and this rom. There is a Minix, "remote.conf" out there somewhere and that's what you need. That's what antonio6o6 did. He edited his remote.conf file.
Apologies if you already know this info.

[fungusfeet]

On the remote configuration file I change
On line 67 . 115
on line 75 . 116
on line 120. 116
And that's all what I did box turn on and off that's what I did on my Minix u9h and remember you have to use the C drive USB that came with the Box and put the Bluetooth from the remote on the C drive cable USB

See attached photo, I don't think anything like that came with my box, presumably that's if you have the optional A2 remote?

[antonio6o6]

Hi, same box. Did your remote work ok? I can't get past select language screen as the key mapping is off, power button is volume up for example and only a few keys work

On the remote configuration file I change
On line 67 . 115
on line 75 . 116
on line 120. 116
And that's all what I did box turn on and off that's what I did on my Minix u9h and remember you have to use the C drive USB that came with the Box and put the Bluetooth from the remote on the C drive cable USB

[fungusfeet]

Well everything is working real well down here on my Minix u9 h video quality grate no lagging changing channels fast. nice I like the wallpaper in the design thank you Minix freaks and the poison team for this bill everything is working great here no modification on this one. If it's not broke don't fix. it satify on this bill

Hi, same box. Did your remote work ok? I can't get past select language screen as the key mapping is off, power button is volume up for example and only a few keys work

[AngelfromSpain]

Any know if my device khadas vim1 ( https://www.khadas.com/vim1 )
works with S905X ROM of Minix Freak OS ?
Which version should I download?

Thank you so much.
You are great

[soldiaz]

For those who want working Tanix TX92 CLOCK module, flash this: https://www.atvxperience.com/downloa...ash-with-twrp/

Works for TX92 as well :-P

[Kazar]

tested s912 img with km8 pro (s912 and 2gb ram ddr3 with special 8gb rom edition). works wifi and bt! security patch march 2019, drm level 3. opengl 3.2. android 7.1.2.
i want to remove atv store because there are less app.
no way to change default wallpaper?

[Solcar]

Hi all.
Tested on a Mecool BB Pro.
Wifi OK
RJ 45 OK
BT OK
Voice assistant Google can not be put in Spanish
YouTube some 720 videos look square.
I have a command that carries the beelink with voice and when I want to use the virtual keyboard it disappears from the screen
This Rom is faster than PoisonATV_V4.9

thanks for all your work

[papla83]

thx minixfreak for the moment everything works perfectly.

Good job.

[CcX85]

Yeah, I've finally Cracked it and got the New MinixFreak Rom installed!!

For those that get stuck here is what I did,

• Reinstalled USB_Burning_Tool 2.1.6 (during install it says its 2.1.7 and in the about section, it says 2.1.3 Strange)
• Run it with Administrator rights (i could here it connect to pc but not see a connection until I did this)
• Load your image - http://tiny.cc/MinixFreak-OS-S912
• Connect you the USB cable to box and then pc
• Select your option - I chose normal erase
• This next step was key to getting it to work and stop issuing me were error - Romcode etc.
• CONNECT the Power cable to the device
• Then click start and fingers crossed it will finish 4 mins later
• When successful show take the USB out of the pc before you press stop as recommended (unsure why)
• Restart the Box and watch the Magic

The device was the Beelink GT1 S912 2/16

------ Installed the QC9377_BT_Fix.zip Patch if you have trouble with BT headset - http://tiny.cc/MinixFreak-OS-S912 ------ Thanks Neomode

Now I did try this using the Micro SD method but it gives error within seconds of upgrade screen and I also notice a few other Roms do not like this that method so hopefully moving forward this will fix the issue of some boxes not showing up when using USB Burning Tool

Hope this helps anyone that gets stuck like I was.

Now I just hope it's even easier when I get my new Box either the KM9 Pro or the T95Q ???

[CcX85]

Hi there MinixFreak, just wish to give you some feedback on your latest Rom that unfortunately, I was unable to use.
I've never had an issue using any of ur Roms but this new one starts to update but only for about 5 sec before the big red X over the android icon.

Adding to my disappointment I was also not able to go back to the build I was on as the mega account now had your latest build or I've lost the link?

While trying to get a Rom on the Device I did notice that atvXperience_S912_V2H_ Mod Sleep Mode Video improvement made my box show up a green screen nothing else
and I was finally able to get a Rom back on the device but one I've not used for some time due to your own work - S912_atvXperience_v2FF Normal (Aida64 Show it as S905X)

Anyone got any thoughts why one is working yet others not but there all S912.img Normal not LP

I was using Burn Card Maker as Device is a no show on USB to USB

The device is Beelink GT1 2/16 Soc S912

[papla83]

Hi. where can i download it ? Thanks.

lol forget.

[minixfreak]

You use S912_1GB.img or S912.img for your t95u pro?

I use s912

[soldiaz]

i tested with t95u pro and it works just fine what device are u using

Weired. I had various signal drops yesterday afternoon. Then, in the evening it worked fine. Maybe sth interferred? Im using TX92 3/32 LPDDR