[ROM] Beelink GT-King ALVATECH Standard Android (9.0 Pie) S922X

[ALVATECH]

Hola ALVATECH, tengo un problema, desinstalé la aplicación PLEX de la ROM original, es un PLEX diferente al que se puede encontrar en PlayStore .
He instalado varias veces las PLEX de PlayStore y de Aptoide y no hay manera de que funcione bien, como la que traia la ROM original , la PO3 de Beelink.
¿Es posible que tu puedas extraerla de la ROM ORIGINAL PO3?

Hello,
You can extract the ROM image using an Amlogic Tool. Then use that tool to get the apk needed. I have put the following link down below.
Thank you,

Alvatech

Link to extract ROM:

https://forum.xda-developers.com/android-stick--console-computers/amlogic/opensource-amlogic-tools-t3786991

[gefattern]

Descargando la imagen original de Beelink y con las Amlogic tools de Ricky Divjakovski puedes sacarla. Lo que no se es si trae alguna libreria adicional que debas copiar también, que puede que sea tu problema.

Hallo ,

English please ,

greetings / gefattern

[Juasser]

Hola ALVATECH, tengo un problema, desinstalé la aplicación PLEX de la ROM original, es un PLEX diferente al que se puede encontrar en PlayStore .
He instalado varias veces las PLEX de PlayStore y de Aptoide y no hay manera de que funcione bien, como la que traia la ROM original , la PO3 de Beelink.
¿Es posible que tu puedas extraerla de la ROM ORIGINAL PO3?

Descargando la imagen original de Beelink y con las Amlogic tools de Ricky Divjakovski puedes sacarla. Lo que no se es si trae alguna libreria adicional que debas copiar también, que puede que sea tu problema.

[SERCOPA]

You're welcome I'm glad you like it!
Thank you,

Alvatech

Hola ALVATECH, tengo un problema, desinstalé la aplicación PLEX de la ROM original, es un PLEX diferente al que se puede encontrar en PlayStore .
He instalado varias veces las PLEX de PlayStore y de Aptoide y no hay manera de que funcione bien, como la que traia la ROM original , la PO3 de Beelink.
¿Es posible que tu puedas extraerla de la ROM ORIGINAL PO3?

[ALVATECH]

He instalado esta ROM en un Beelink KING, muy agradecido, funciona a la perfección .
Muchas gracias
Saludos

You're welcome I'm glad you like it!
Thank you,

Alvatech

[SERCOPA]

He instalado esta ROM en un Beelink KING, muy agradecido, funciona a la perfección .
Muchas gracias
Saludos

[elmik]

Hello,
I have personally downloaded this ROM again just to test this and I have successfully made an SD-Card with the Burn Card Maker Tool without any errors. You might have a corrupted image. Please try to download the ROM again and also make sure you extract the ROM / image from the zip file before making the SD-Card or trying to flash it to your box.
Thank you,

Alvatech

Hi thank You for Your reply. I solved this, the problem was with my laptop with win 7 64bit, on other pc with win 10 32 bit everything works.

[ALVATECH]

Hi
I have problem with burning, on SD card maker have error fail to extract bootloader.partition.
And on usb burning tool: parse burning image fail.
What can I do?

Hello,
I have personally downloaded this ROM again just to test this and I have successfully made an SD-Card with the Burn Card Maker Tool without any errors. You might have a corrupted image. Please try to download the ROM again and also make sure you extract the ROM / image from the zip file before making the SD-Card or trying to flash it to your box.
Thank you,

Alvatech

[ALVATECH]

For x88-King

It seems that the only thing that dont works are the usb. I'd tried and Lan, wifi, bt, Ir... and all works, storage show 128Gb too. Would be wonderful if someone can make a patch to make usb works. I downladed an app from play store to see usb devices and seems that both are reconogised but no input or storage devices work. I post the log.


Device Info
Device Path: /sys/bus/usb/devices/usb1/
Device Class: USB Hub (0x9)
Vendor ID: 1d6b
Vendor Name (reported): Linux 4.9.113 xhci-hcd
Vendor Name (from DB): Linux Foundation
Product ID: 0002
Product Name (reported): xHCI Host Controller
Product Name (from DB): not found

Additional Info
USB Version: 2.00
Speed: 480
Protocol: 01
Maximum Power: 0mA
Serial Number: xhci-hcd.0.auto

---------------------------------------------------
Device Info
Device Path: /sys/bus/usb/devices/usb2/
Device Class: USB Hub (0x9)
Vendor ID: 1d6b
Vendor Name (reported): Linux 4.9.113 xhci-hcd
Vendor Name (from DB): Linux Foundation
Product ID: 0003
Product Name (reported): xHCI Host Controller
Product Name (from DB): not found

Additional Info
USB Version: 3.00
Speed: 5000
Protocol: 03
Maximum Power: 0mA
Serial Number: xhci-hcd.0.auto

Thanks in advance

Hello,
If you could please start a new topic / thread for your box. I would like to keep this thread about this ROM (GT-King) only please.
Thank you,

Alvatech

[Juasser]

Thanks, I might give that a try....will let you know.
Still don't work, it loaded but knowing worked...USB's Mouse etc.

For x88-King

It seems that the only thing that dont works are the usb. I'd tried and Lan, wifi, bt, Ir... and all works, storage show 128Gb too. Would be wonderful if someone can make a patch to make usb works. I downladed an app from play store to see usb devices and seems that both are reconogised but no input or storage devices work. I post the log.


Device Info
Device Path: /sys/bus/usb/devices/usb1/
Device Class: USB Hub (0x9)
Vendor ID: 1d6b
Vendor Name (reported): Linux 4.9.113 xhci-hcd
Vendor Name (from DB): Linux Foundation
Product ID: 0002
Product Name (reported): xHCI Host Controller
Product Name (from DB): not found

Additional Info
USB Version: 2.00
Speed: 480
Protocol: 01
Maximum Power: 0mA
Serial Number: xhci-hcd.0.auto

---------------------------------------------------
Device Info
Device Path: /sys/bus/usb/devices/usb2/
Device Class: USB Hub (0x9)
Vendor ID: 1d6b
Vendor Name (reported): Linux 4.9.113 xhci-hcd
Vendor Name (from DB): Linux Foundation
Product ID: 0003
Product Name (reported): xHCI Host Controller
Product Name (from DB): not found

Additional Info
USB Version: 3.00
Speed: 5000
Protocol: 03
Maximum Power: 0mA
Serial Number: xhci-hcd.0.auto

Thanks in advance

[elmik]

Hi
I have problem with burning, on SD card maker have error fail to extract bootloader.partition.
And on usb burning tool: parse burning image fail.
What can I do?

[ALVATECH]

What about SN: SA9XHQ....?

I had gotten informed from Beelink that the ROM from GT-King PRO will work for SN:SA9X use C92X ROM if you like.
Thank you,

Alvatech

[Cafpy90]

Hello,
yes the Android TV Remote app works with this ROM.
Thanks,

Alvatech

Good man, thanks!

[ALVATECH]

Question... Does the android tv remote from the playstore (the generic one) work with this rom?

I hate using a keyboard to type stuff, and would much rather use my phone so this would be a god send!

Thanks guys!

Hello,
yes the Android TV Remote app works with this ROM.
Thanks,

Alvatech

[Cafpy90]

Question... Does the android tv remote from the playstore (the generic one) work with this rom?

I hate using a keyboard to type stuff, and would much rather use my phone so this would be a god send!

Thanks guys!