Clear CMOS on beelink Pocket p2

[hotte96]

Hello.
i have a wrong USB Chipsets in to the BIOS used.
All USB Port are not useable.

All USB port's have 5 volt, there are not bricked

then I noticed that the bios battery is empty and they exchanged for a new and connected. the stick and windows start normally

I have found a guide to clear CMOS on beelink forum

my steps to clear CMOS.

1 Power of / remove all cable and USB plugs 2 remove the Batterie cable for exakt 30sec
3 First the Batterie and then the Power cable Connect
4 Pocket PC boot Into windows

CMOS Not clear

1 remove the Batterie cable for 8h
2 Connect the Batterie cable und Power on
CMOS Not clear

what do I have to do, in what order do I have the BIOS reset (clear cmos).

Best reguard

[hotte96]

Hello. I used a wrong USB chipset in the BIOS. All USB port can not be used. All USB port is 5 volts, there is not bricked up then i noticed that the bios battery is empty and you exchanged it for a new and connected one. the stick and windows start normally I have instructions for deleting the CMOS on the beelink forum my steps to clear the CMOS. 1 force / remove all cables and USB connector 2 remove the battery cable for exactly 30sec 3 Connect the battery first and then the power cable 4 Pocket PC boots into the windows Do not delete CMOS 1 remove the battery cable for 8h 2 Lipo cable Connect and switch on Do not delete CMOS what do I have to do, in which order do I have to reset the BIOS (clear cmos).

[hotte96]

there is only one way to reset the BIOS. Remove bios ic and re-flash. WTF
a wrong attitude in bios and you have a new paperweight for 120? Best reguard